Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Diffusion in concentrated solutions differs from that in dilute solutions,
because of the change in the __________ with the concentration of the
solution.
(A) Degree of ideality
(B) Viscosity
(C) Both 'a '& 'b'
(D) Neither 'a' nor 'b'
by

1 Answer

Answer :

(C) Both 'a '& 'b
by

Related questions

Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Freundlich equation applies to the adsorption of solute from (A) Dilute solutions, over a small concentration range (B) Gaseous solutions at high pressure (C) Concentrated solutions (D) None of these

Description : Freundlich equation applies to the adsorption of solute from (A) Dilute solutions, over a small concentration range (B) Gaseous solutions at high pressure (C) Concentrated solutions (D) None of these

Last Answer : (A) Dilute solutions, over a small concentration range

Wrought iron is a suitable material of construction for handling __________ solutions(A) Dilute acidic(B) Concentrated acidic(C) Alkalis & alkaline(D) None of these

Description : Wrought iron is a suitable material of construction for handling __________ solutions (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Last Answer : (C) Alkalis & alkaline

Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Description : Wrought iron is a suitable material of construction for handling __________ solutions. (A) Dilute acidic (B) Concentrated acidic (C) Alkalis & alkaline (D) None of these

Last Answer : (C) Alkalis & alkaline

In case of constant underflow extraction operation, the __________ atall solute concentration.(A) Solids are drained to the same extent(B) Ratio of the insoluble to solution is constant(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a CSTR __________ varies with time. (A) Reaction rate (B) Concentration (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Stefan's law describes the mass transfer by (A) Diffusion (B) Bulk flow (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Stefan's law describes the mass transfer by (A) Diffusion (B) Bulk flow (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Description : For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Last Answer : (C) Dilute solution and isothermal operation

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

Titer refers to a. The most concentrated antigen-antibody concentration showing a reaction.b. The first diluted antigen-antibody concentration showing a reaction. c. The precipitation line formed between an antigen-antibody reaction. d. The most dilute antigen-antibody concentration showing a reaction.

Description : Titer refers to a. The most concentrated antigen-antibody concentration showing a reaction. b. The first diluted antigen-antibody concentration showing a reaction. c. The precipitation line ... antigen-antibody reaction. d. The most dilute antigen-antibody concentration showing a reaction.

Last Answer : d. The most dilute antigen-antibody concentration showing a reaction.

If two pure liquid constituents are mixed in any proportion to give an ideal solution, there is no change in (A) Volume (B) Enthalpy (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If two pure liquid constituents are mixed in any proportion to give an ideal solution, there is no change in (A) Volume (B) Enthalpy (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Concentration of H2SO4 catalyst in alkylation is kept between 90-98%, because H2SO4 having concentration. (A) Less than 90% promotes polymerisation (B) More than 98% promotes cracking (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Slurry reactors are characterised by the (A) Lack of intraparticle diffusion resistance (B) Presence of two mobile phases (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Slurry reactors are characterised by the (A) Lack of intraparticle diffusion resistance (B) Presence of two mobile phases (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : he gas law (PV = RT) is true for an __________ change. (A) Isothermal (B) Adiabatic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

A salt solution of `Cd^(2+)` in dilute HCl, on treatment with a solution of `BaCl_(2)` gives a white precipitate, which is insoluble in concentrated `

Description : A salt solution of `Cd^(2+)` in dilute HCl, on treatment with a solution of `BaCl_(2)` gives a white precipitate, which is insoluble in concentrated `

Last Answer : A salt solution of `Cd^(2+)` in dilute HCl, on treatment with a solution of `BaCl_(2)` gives a white precipitate, ... C. `NO_(2)^(-)` D. `S^(2-)`

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Description : Lead pipes are not safe for carrying drinking water because water containing dissolved oxygen attacks lead thereby forming poisonous Pb (OH)2 . Lead pipes are readily corroded by (A) Dilute HCI (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Last Answer : (B) Acetic acid

Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Description : Lead pipes are not safe for carrying drinking water, because water, containing dissolved oxygen attacks lead thereby forming poisonous Pb(OH)2 . Lead pipes are readily corroded by (A) Dilute HCl (B) Acetic acid (C) Concentrated H2SO4 (D) None of these

Last Answer : (B) Acetic acid

The process of one substance mixing with another because of molecular motion is called _________.  a. diffusion  b. viscosity  c. streamline flow  d. solution

Description : The process of one substance mixing with another because of molecular motion is called _________.  a. diffusion  b. viscosity  c. streamline flow  d. solution

Last Answer : diffusion

KOH solution used in Orsat apparatus absorbs (A) CO2 (B) SO2 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : KOH solution used in Orsat apparatus absorbs (A) CO2 (B) SO2 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80

Description : Very dilute solutions are generally used in fermentation reactions for which the optimum temperature range is __________ °C. (A) -5 to 0 (B) 5 to 10 (C) 30 to 50 (D) 75 to 80

Last Answer : (C) 30 to 50

The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Description : The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Last Answer : (C) Super-saturation

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

The activity co-efficient of the solute in a dilute solution (A) Decreases with the increase of concentration of the solute (B) Increases with the increase of concentration of the solute (C) Remains constant (D) Is unity at infinite dilution

Description : The activity co-efficient of the solute in a dilute solution (A) Decreases with the increase of concentration of the solute (B) Increases with the increase of concentration of the solute (C) Remains constant (D) Is unity at infinite dilution

Last Answer : (C) Remains constant

When dilute aqueous solutions of two salts are mixed, the process is associated with (A) Decrease in temperature (B) Increase in temperature (C) No change in temperature (D) Change in temperature which is a function of composition

Description : When dilute aqueous solutions of two salts are mixed, the process is associated with (A) Decrease in temperature (B) Increase in temperature (C) No change in temperature (D) Change in temperature which is a function of composition

Last Answer : B) Increase in temperature

The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are (A) Parallel (B) Straight (C) Both parallel and straight (D) Neither parallel nor straight

Description : The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are (A) Parallel (B) Straight (C) Both parallel and straight (D) Neither parallel nor straight

Last Answer : (C) Both parallel and straight

In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Gas

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)