Presence of force moisture in coal is most disadvantageous during its (A) Transportation and handling (B) Washing (C) Pulverisation (D) Storage

Presence of force moisture in coal is most disadvantageous during its
(A) Transportation and handling
(B) Washing
(C) Pulverisation
(D) Storage
by

1 Answer

Answer :

(C) Pulverisation
by

Related questions

Presence of free moisture in coal is most disadvantageous during(A) Its pulverisation (as it requires more power) (B) Combustion of fire slacks on the grates (C) Handling (e.g. when emptying wagons) (D) None of these

Description : Presence of free moisture in coal is most disadvantageous during (A) Its pulverisation (as it requires more power) (B) Combustion of fire slacks on the grates (C) Handling (e.g. when emptying wagons) (D) None of these

Last Answer : (A) Its pulverisation (as it requires more power)

Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Description : Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Last Answer : (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls

A secondary -use package can best be defined as one that A)can be used as a promotional tool. B)can be reused for purposes other than its initial use. C)facilitates transportation, storage, and handling for middlemen. D)is recyclable and environmentally safe.

Description : A secondary -use package can best be defined as one that A)can be used as a promotional tool. B)can be reused for purposes other than its initial use. C)facilitates transportation, storage, and handling for middlemen. D)is recyclable and environmentally safe.

Last Answer : A)can be used as a promotional tool.

As the instruction length increases ————_ of instruction addresses in all the instruction is_ a. Implicit inclusion b. Implicit and disadvantageous c. Explicit and disadvantageous d. Explicit and disadvantageous

Description : As the instruction length increases ————_ of instruction addresses in all the instruction is_ a. Implicit inclusion b. Implicit and disadvantageous c. Explicit and disadvantageous d. Explicit and disadvantageous

Last Answer : c. Explicit and disadvantageous

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Description : Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Last Answer : (D) Compression

By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distributi9on activities except 1. inventory planning 2. transportation 3. materials handling 4. unit pricing 5. communication

Description : By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distributi9on activities except 1. inventory planning 2. transportation 3. materials handling 4. unit pricing 5. communication

Last Answer : unit pricing

__________ adds time and place utility to a product by moving it from where it is made to where it is purchased and used. A)Warehousing B)Containerisation C)Distribution D)Materials handling E)Transportation

Description : __________ adds time and place utility to a product by moving it from where it is made to where it is purchased and used. A)Warehousing B)Containerisation C)Distribution D)Materials handling E)Transportation

Last Answer : E)Transportation

Greg is a physical distribution manager. He is currently developing and maintaining assortments of products that are adequate for customer demand. In which stage in the physical distribution system is Greg currently involved? A)Order processing B)Materials handling C)Inventory management D)Transportation E)Warehousing

Description : Greg is a physical distribution manager. He is currently developing and maintaining assortments of products that are adequate for customer demand. In which stage in the physical distribution ... involved? A)Order processing B)Materials handling C)Inventory management D)Transportation E)Warehousing

Last Answer : C)Inventory management

Which of the following physical distribution functions involves the design and operation of facilities for storing and moving goods? A)Order processing B)Materials handling C)Transportation D)Warehousing E)Inventory management

Description : Which of the following physical distribution functions involves the design and operation of facilities for storing and moving goods? A)Order processing B)Materials handling C)Transportation D)Warehousing E)Inventory management

Last Answer : D)Warehousing

Order processing, inventory management, materials handling, warehousing, and transportation are __________ activities. A)wholesaling B)retailing C)physical distribution D)channel management

Description : Order processing, inventory management, materials handling, warehousing, and transportation are __________ activities. A)wholesaling B)retailing C)physical distribution D)channel management

Last Answer : C)physical distribution

By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distribution activities except A)inventory planning. B)transportation. C)materials handling. D)unit pricing. E)communication.

Description : By buying in large quantities and delivering to customers in smaller lots, a wholesaler may perform all of the following physical distribution activities except A)inventory planning. B)transportation. C)materials handling. D)unit pricing. E)communication.

Last Answer : D)unit pricing.

With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Last Answer : (D) None of these

With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Last Answer : (B) Caking properties diminish

Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

The movement of soil across a tool surface without sticking is called as a. Pulverisation b. Inversion c. Scouring d. Turning

Description : The movement of soil across a tool surface without sticking is called as a. Pulverisation b. Inversion c. Scouring d. Turning

Last Answer : c. Scouring

Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull

Description : Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull

Last Answer : Pulverisation 

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Description : The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

_________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Description : _________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Last Answer : c) Scouring

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000

Description : Calorific value of coal middling generated in coal washeries during washing of coal may be around __________ Kcal/kg. (A) 1000 (B) 4000 (C) 6000 (D) 8000

Last Answer : (B) 4000

Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value(C) Improves its coking properties(D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value (C) Improves its coking properties (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Description : Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these

Last Answer : (D) None of these

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Washing of coal decreases its (A) Caking index (B) Mineral matter content (C) Ash content (D) Both (B) and (C)

Description : Washing of coal decreases its (A) Caking index (B) Mineral matter content (C) Ash content (D) Both (B) and (C)

Last Answer : (B) Mineral matter content

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) Requirement of large volume combustion chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Description : Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) ... chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Last Answer : (B) Risk of explosion

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : (C) Ash

As the equilibrium moisture content of the coal increases, its (A) Calorific value increases (B) Swelling number decreases (C) Swelling number increases (D) Bulk density decreases

Description : As the equilibrium moisture content of the coal increases, its (A) Calorific value increases (B) Swelling number decreases (C) Swelling number increases (D) Bulk density decreases

Last Answer : (B) Swelling number decreases

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (A) Carbon, hydrogen, nitrogen & sulphur

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture, volatile matter, ash & fixed carbon

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture & volatile matter

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen(C) Carbon, sulphur, volatile matter & ash(D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (C) Carbon, sulphur, volatile matter & ash

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : Option D

The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Description : The liquid used for the washing of coal in an industrial coal washery is a mixture of water and (A) Carbon tetrachloride (B) Sand (40%) (C) Mineral oil of high viscosity & specific gravity (1.6) (D) None of these

Last Answer : (B) Sand (40%)

Froth floatation is used for (A) Washing fine coal dust (< 0.5 mm size) (B) Washing lump coal (> 80 mm size) (C) Removing ash from the coal based on difference in specific gravity of coal and ash

Description : Froth floatation is used for (A) Washing fine coal dust (< 0.5 mm size) (B) Washing lump coal (> 80 mm size) (C) Removing ash from the coal based on difference in specific gravity of coal and ash

Last Answer : (A) Washing fine coal dust (< 0.5 mm size)

Washing of coal is done to reduce the (A) Inherent impurities (B) Adhering impurities (C) Mineral matter (D) Both (B) and (C)

Description : Washing of coal is done to reduce the (A) Inherent impurities (B) Adhering impurities (C) Mineral matter (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger(C) Is not subjected to washing(D) Has low quantity of mineral matter

Description : A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger (C) Is not subjected to washing (D) Has low quantity of mineral matter

Last Answer : (B) Is harder and stronger

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and equilibrium moisture in a solid is called the critical moisture (D) The driving force for mass transfer in a wet solid is its free moisture content

Description : Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and ... (D) The driving force for mass transfer in a wet solid is its free moisture content

Last Answer : (D) The driving force for mass transfer in a wet solid is its free moisture content

Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Description : Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Last Answer : (C) Bamboo

Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture

Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon

Description : Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon

Last Answer : (D) Carbon