Presence of free moisture in coal is most disadvantageous during(A) Its pulverisation (as it requires more power) (B) Combustion of fire slacks on the grates (C) Handling (e.g. when emptying wagons) (D) None of these

Presence of free moisture in coal is most disadvantageous during
(A) Its pulverisation (as it requires more power)
(B) Combustion of fire slacks on the grates
(C) Handling (e.g. when emptying wagons)
(D) None of these
by

1 Answer

Answer :

(A) Its pulverisation (as it requires more power)
by

Related questions

Presence of force moisture in coal is most disadvantageous during its (A) Transportation and handling (B) Washing (C) Pulverisation (D) Storage

Description : Presence of force moisture in coal is most disadvantageous during its (A) Transportation and handling (B) Washing (C) Pulverisation (D) Storage

Last Answer : (C) Pulverisation

To avoid fire by spontaneous combustion of coal due to its low temperature oxidation, it should be stored in (A) Shallow and small piles (B) Fine sizes without the presence of any lump (C) Closed space without any ventilation facility (D) Large heaps with small surface to volume ratio

Description : To avoid fire by spontaneous combustion of coal due to its low temperature oxidation, it should be stored in (A) Shallow and small piles (B) Fine sizes without the presence of any lump (C) Closed space without any ventilation facility (D) Large heaps with small surface to volume ratio

Last Answer : (A) Shallow and small piles

. A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Description : . A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Description : Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Last Answer : (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls

With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Last Answer : (D) None of these

Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture

During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Description : During combustion of coal on grate, clinker formation is increased by the (A) Use of thick fire bed (B) Low fusion point of ash (< 1100° C) (C) Use of preheated primary air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) Is more difficult to ignite and produces a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Description : A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon (A) Is less liable to spontaneous combustion on storage (B) ... a shorter flame (C) Requires smaller combustion space and less secondary air (D) None of these

Last Answer : (D) None of these

1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Description : 1 kg of wood contains 15% moisture and 5% hydrogen by weight. How much water is evaporated during complete combustion of 1kg of wood? a) 0.6 kg b) 200 g c) 0.15 kg d) none of the above

Last Answer : b)200 g

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles

Description : Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles

Last Answer : (D) Clean the nozzles

Producer gas containing least amount of tar is produced by the (A) Partial combustion of coal (B) Partial combustion of large size (< 50 mm) coke (C) High pressure gasification of coal (e.g. in Lurgi gasifier) (D) Atmospheric pressure gasification of coal (e.g., in Kopper-Totzek gasifier)

Description : Producer gas containing least amount of tar is produced by the (A) Partial combustion of coal (B) Partial combustion of large size (< 50 mm) coke (C) High pressure gasification of coal (e.g. in Lurgi gasifier) (D) Atmospheric pressure gasification of coal (e.g., in Kopper-Totzek gasifier)

Last Answer : (B) Partial combustion of large size (< 50 mm) coke

how do you feel when you start to think about just how rich the ultra rich (Jefferdy beznos, Elont musky, Billy grates) truly are?

Description : how do you feel when you start to think about just how rich the ultra rich (Jefferdy beznos, Elont musky, Billy grates) truly are?

Last Answer : They should be executed.

As the instruction length increases ————_ of instruction addresses in all the instruction is_ a. Implicit inclusion b. Implicit and disadvantageous c. Explicit and disadvantageous d. Explicit and disadvantageous

Description : As the instruction length increases ————_ of instruction addresses in all the instruction is_ a. Implicit inclusion b. Implicit and disadvantageous c. Explicit and disadvantageous d. Explicit and disadvantageous

Last Answer : c. Explicit and disadvantageous

Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Description : Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Last Answer : (C) Increases capacity

In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Description : In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Last Answer : (D) None of these

Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Description : Which of the following terminology is not used for size reduction of materials to fine sizes or powders? (A) Comminution (B) Dispersion (C) Pulverisation (D) Compression

Last Answer : (D) Compression

Coal is pulverised before burning in large capacity boiler furnaces mainly to (A) Ensure its complete combustion (B) Facilitate easy ash removal (C) Enhance its calorific value (D) Provide trouble free operation

Description : Coal is pulverised before burning in large capacity boiler furnaces mainly to (A) Ensure its complete combustion (B) Facilitate easy ash removal (C) Enhance its calorific value (D) Provide trouble free operation

Last Answer : (A) Ensure its complete combustion

Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Description : Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Last Answer : (C) Bamboo

With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases (B) Caking properties diminish (C) Swelling during carbonisation becomes excessive (D) None of these

Last Answer : (B) Caking properties diminish

Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C) With increase in oxygen content, moisture holding capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C ... capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

If oxygen content in the flue gas rises too high, fuel is being wasted by (A) Incomplete combustion (B) Dry gas/stack gas loss (C) Moisture loss (D) None of these

Description : If oxygen content in the flue gas rises too high, fuel is being wasted by (A) Incomplete combustion (B) Dry gas/stack gas loss (C) Moisture loss (D) None of these

Last Answer : (B) Dry gas/stack gas loss

Moisture loss is determined by the (A) Humidity of combustion air (B) Moisture content of fuel (C) Both (A) and (B) (D) The water formed by combustion reaction

Description : Moisture loss is determined by the (A) Humidity of combustion air (B) Moisture content of fuel (C) Both (A) and (B) (D) The water formed by combustion reaction

Last Answer : (C) Both (A) and (B)

Fuel combustion is never cent per cent efficient due to (A) Incomplete combustion (B) Dry gas/stack gas loss (C) Moisture loss (D) All (A), (B) and (C)

Description : Fuel combustion is never cent per cent efficient due to (A) Incomplete combustion (B) Dry gas/stack gas loss (C) Moisture loss (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Description : During combustion of a gaseous fuel, the presence of a non-luminous flame is an indication of the (A) Incomplete combustion (B) Complete combustion (C) High oxygen in flue gas (D) None of these

Last Answer : (B) Complete combustion

Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Description : Emission of dense white smoke out of the chimney of a thermal power plant is an indication of the use of (A) Less air for combustion (B) Correct amount of air for combustion (C) Too much air for combustion (D) Pulverised coal in boilers

Last Answer : (C) Too much air for combustion

Where can I find XXL mens blue jeans or slacks, big and tall, in Red Deer or online?

Description : Where can I find XXL mens blue jeans or slacks, big and tall, in Red Deer or online?

Last Answer : There are dozens of places online. Just type in men’s jeans and watch the choices fly out at you. You’ll find the sizes listed waist first like 44×34

Why is the article of clothing that men wear under their slacks NEVER called "underpants"?

Description : Why is the article of clothing that men wear under their slacks NEVER called "underpants"?

Last Answer : Hey, don’t forget ‘tighty whiteys’!!

Can anyone tell me where I can find appropriate school slacks?

Description : Can anyone tell me where I can find appropriate school slacks?

Last Answer : Akua – Try Schoolbelles . They sell clothing that is specifically for school uniforms. I poked around and found these pants that run from $16 to $21 in a wide variety of sizes. Also, I found these pants at Kohl’s.

If you could afford the price, would you pay $100.00 per shirt and slacks or skirt to have them custom sewn and tailored to your body?

Description : If you could afford the price, would you pay $100.00 per shirt and slacks or skirt to have them custom sewn and tailored to your body?

Last Answer : If I could afford it, I would do it. I have a very hard time finding clothes that fit my body. I usually have to make some kind of sacrifice with my clothing (the top part of the shirt ... ). I usually end up doing some alterations or settling for clothes that could look better if they fit properly.

The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Description : The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Last Answer : Answer: Option B

The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Description : The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Last Answer : b) Quicklime*

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

The movement of soil across a tool surface without sticking is called as a. Pulverisation b. Inversion c. Scouring d. Turning

Description : The movement of soil across a tool surface without sticking is called as a. Pulverisation b. Inversion c. Scouring d. Turning

Last Answer : c. Scouring

Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull

Description : Vertical section of plough influence A. Pulverisation B. Depth of cut C. Width of cut. D. Direction of pull

Last Answer : Pulverisation 

Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed

Last Answer : p. For operating on the sides of plant bed

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Description : The amount of energy required to produce a given degree of pulverisation depends primarily on a) Soil strength b) Energy utilisation efficiency of tool c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

_________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Description : _________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Last Answer : c) Scouring

To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Description : To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Last Answer : (A) Perfectly dry

Consider the following statements: 1. Gondwana coal is a laminated, bituminous coal. . 2. Gondwana coal is completely free from moisture, sulphur and phosphorus. Which of the statements given above is/are correct? [IAS 2008] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. Gondwana coal is a laminated, bituminous coal. . 2. Gondwana coal is completely free from moisture, sulphur and phosphorus. Which of the statements given above is/are correct? [IAS 2008] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans: (a)

One kg of carbon for theoretically complete combustion requires __________ kg of air. (A) 11.5 (B) 0.5 (C) 23 (D) 12

Description : One kg of carbon for theoretically complete combustion requires __________ kg of air. (A) 11.5 (B) 0.5 (C) 23 (D) 12

Last Answer : (A) 11.5

Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole(B) 22.4 Nm3(C) 32 kg(D) All (A), (B) and (C)

Description : Stoichiometric combustion of 12 kg of carbon requires __________ of oxygen. (A) 1kg mole (B) 22.4 Nm3 (C) 32 kg (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Description : Combustion of pulverised fuel (A) Requires larger combustion chamber than rich gaseous fuel (B) In a metallurgical furnace does not contaminate the product in the furnace by ash from fuel (C) Suppresses the discharge of fine dust and grit into atmosphere (D) All (A), (B) and (C)

Last Answer : (A) Requires larger combustion chamber than rich gaseous fuel

Were there suped up stage wagons in the old days?

Description : Were there suped up stage wagons in the old days?

Last Answer : I remember seeing one old west movie that had a stagecoach wagon race. it was really an unfair race, since one stagecoach only had four horses and the other had six. i guess you could compare that race to a modern day 4 cylinder engine to a 6 cylinder engine. not bad, huh?

Are VW passat wagons good cars?

Description : Are VW passat wagons good cars?

Last Answer : Volkswagens in general are very well engineered cars with abysmal quality control problems, which is an odd combination. Volkswagens have a very high rate of repair issues and customer dissatisfaction, but they are ... really bad one. It might be very important for you to find a good repair center.

People who clean subway wagons, what's the worst thing you ever found?

Description : People who clean subway wagons, what's the worst thing you ever found?

Last Answer : Need Answer

What is another way of saying the people in the wagons?

Description : What is another way of saying the people in the wagons?

Last Answer : the people riding the wagons