Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Safe condition for storage of high V.M. bituminous coal is that
(A) Height of the coal heap should be < 3 metres
(B) Maximum 200 tons should be stored in a heap
(C) Both (A) and (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) and (B)
by

Related questions

Which of the following must be stored in silos and not in open yard? (A) Coke breeze (B) High V.M. bituminous coal (C) Sand (D) None of these

Description : Which of the following must be stored in silos and not in open yard? (A) Coke breeze (B) High V.M. bituminous coal (C) Sand (D) None of these

Last Answer : (B) High V.M. bituminous coal

Consider the following statements: 1. Gondwana coal is a laminated, bituminous coal. . 2. Gondwana coal is completely free from moisture, sulphur and phosphorus. Which of the statements given above is/are correct? [IAS 2008] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. Gondwana coal is a laminated, bituminous coal. . 2. Gondwana coal is completely free from moisture, sulphur and phosphorus. Which of the statements given above is/are correct? [IAS 2008] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans: (a)

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The reservoir will theoretically be silted in 240 years (B) The reservoir will start reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The ... reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

The difference between total carbon and fixed carbon of coal will be minimum in case of (A) Lignite (B) Bituminous coal (C) Anthracite (D) High temperature coke (V.M < 0.5%)

Description : The difference between total carbon and fixed carbon of coal will be minimum in case of (A) Lignite (B) Bituminous coal (C) Anthracite (D) High temperature coke (V.M < 0.5%)

Last Answer : (D) High temperature coke (V.M < 0.5%)

For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Description : For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Last Answer : (D) Equal to the height of the hot gas column producing draught

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Description : A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Last Answer : Diameter of cone = 10.5 m Radius of cone (r) = 5.25 m Height of cone (h) = 3 m Volume of cone = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 5.25 × 5.25 × 3 = 86.625m3 Cost of 1m3 of wheat = 10 ∴ Cost of 86.625 m3 of wheat = 10 × 86.625 = 86.625

A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Description : A heap of wheat is in the form of a cone whose diameter is 10.5 m and height is 3 m. -Maths 9th

Last Answer : Diameter of cone = 10.5 m Radius of cone (r) = 5.25 m Height of cone (h) = 3 m Volume of cone = 1 / 3 πr2h = 1 / 3 × 22 / 7 × 5.25 × 5.25 × 3 = 86.625m3 Cost of 1m3 of wheat = 10 ∴ Cost of 86.625 m3 of wheat = 10 × 86.625 = 86.625

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Coke oven gas produced by high temperature carbonisation of coal (as compared to that produced by low temperature carbonisation), has (A) Higher calorific value (B) Lower hydrogen content (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one element (s2) if δ(q, λ, b) is not empty then δ(q, c, b) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Last Answer : (C) both s1 and s2

Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal

Description : Out of the following fuels, the difference between the net and gross calorific value is maximum in case of (A) Pitch (B) Fuel oil (C) Blast furnace gas (D) Bituminous coal

Last Answer : (B) Fuel oil

A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Description : A belt conveyor used for the transportation of materials can (A) Run upto 1 km (B) Travel at a speed upto 300 metres/minute (C) Handle materials upto 5000 tons/hr (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The fuel ratio of a coal is (A) The ratio of its percentage of fixed carbon to that of volatile matter (B) Helpful in estimation of its rank (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The fuel ratio of a coal is (A) The ratio of its percentage of fixed carbon to that of volatile matter (B) Helpful in estimation of its rank (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Sulphur in metallurgical coal (A) Contributes to its heating value (B) Affects the quality of steel produced as cracks develop on the surface while rolling the steel (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Is a struct stored on the heap or stack?

Description : Is a struct stored on the heap or stack? 

Last Answer : Stack

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

Resistance to fusion of the refractory under a steady rising temperature condition is called (A) Spalling (B) Refractoriness (C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Resistance to fusion of the refractory under a steady rising temperature condition is called (A) Spalling (B) Refractoriness (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Refractoriness

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The following are electronic record a) Record which is printed on a paper. b) Record which is stored , recorded, or copied in optical or magnetic media produced by computer c) Both A & B d) Neither A nor B

Description : The following are electronic record a) Record which is printed on a paper. b) Record which is stored , recorded, or copied in optical or magnetic media  produced by computer c) Both A & B d) Neither A nor B

Last Answer : c) Both A & B

Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Breathing loss" on storage of gasoline occurs due to the (A) Presence of unsaturated air (B) Fluctuation of ambient temperature during day and night (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Fluctuation of ambient temperature during day and night

Bituminous coal (A) Ignites less easily than anthracite (B) Is generally coking (C) Burns with smoky yellow flame (D) Both (B) and (C)

Description : Bituminous coal (A) Ignites less easily than anthracite (B) Is generally coking (C) Burns with smoky yellow flame (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Description : An RG-11/U foam coaxial cable has a maximum voltage standing wave of 52 V and a minimum voltage of 17 V. Find the value of the resistive load. A. 24.59Ω B. Either A or C C. 228.75Ω D. Neither A nor C

Last Answer : B. Either A or C

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

Maximum permissible velocity 1.5 m/sec, is adopted in drains A. With beds of rocks and gravels B. Lined with stones C. Both A. and B. D. Neither A. nor B.

Description : Maximum permissible velocity 1.5 m/sec, is adopted in drains A. With beds of rocks and gravels B. Lined with stones C. Both A. and B. D. Neither A. nor B.

Last Answer : ANS: C

For efficient working of a sewer, it must be ensured that A. Minimum velocity of 0.45 m/sec, is maintained at its minimum flow B. A maximum velocity of 0.90 m/sec, is maintained at its maximum flow C. Both A. and B. D. Neither A. nor B.

Description : For efficient working of a sewer, it must be ensured that A. Minimum velocity of 0.45 m/sec, is maintained at its minimum flow B. A maximum velocity of 0.90 m/sec, is maintained at its maximum flow C. Both A. and B. D. Neither A. nor B.

Last Answer : ANS: C

shaft subjected to a bending moment M and a torque T, experiences (A) Maximum bending stress = 32M d 3 (B) Maximum shear stress = 16 T d 3 (C) Both (a) and (b) (D) Neither (a) nor (b)

Description :  shaft subjected to a bending moment M and a torque T, experiences  (A) Maximum bending stress = 32M d 3 (B) Maximum shear stress = 16 T d 3 (C) Both (a) and (b)  (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b) 

Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Description : H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S ... by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Last Answer : (A) 2.0

Height of coke oven is limited (say maximum upto 7 metres) mainly by the(A) Problem of uniform heating along its height(B) Structural strength of silica bricks(C) Problem in door cleaning(D) Buckling of ram of pusher car at the time of coke pushing

Description : Height of coke oven is limited (say maximum upto 7 metres) mainly by the (A) Problem of uniform heating along its height (B) Structural strength of silica bricks (C) Problem in door cleaning (D) Buckling of ram of pusher car at the time of coke pushing

Last Answer : (A) Problem of uniform heating along its height

Pick out the correct statement.(A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height vessel of very large diameter used for the storage of high volatile matter coal (D) Pine oil is used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Description : Pick out the correct statement. (A) Angle of repose is always greater than the angle of slide (B) A hopper is a small bin with a sloping bottom (C) A silo is a short height ... used as a 'modifying agent' (for activating or depressing the adsorption of filming agents) in froth floatation process

Last Answer : (B) A hopper is a small bin with a sloping bottom

Facts means and include a) Any thing, state of things, or relation of things, capable of being perceived by the senses b) Any mental condition of which any person is conscious. c) Both the A and B d) Neither A nor B

Description : Facts means and include a) Any thing, state of things, or relation of things, capable of being perceived by the  senses b) Any mental condition of which any person is conscious. c) Both the A and B d) Neither A nor B

Last Answer : c) Both the A and B

The main aspect of 'casual research' is ____________ 1. necessary condition 2. sufficient condition 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Description : The main aspect of 'casual research' is ____________ 1. necessary condition 2. sufficient condition 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Last Answer : both 1 & 2

When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Description : When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Last Answer : Answer: Option C

What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor absorbed Correct (4) Answer – (1) energy is always absorbed Explanation: If a bond is broken, energy is released; and if a bond is formed, energy must have been absorbed. As these occur, a change in the chemical energy of the system also occurs. Within each bond of a molecule is an experimentally determined amount of enemy that upon the breaking of that bond is released into the chemical system. The energy within these bonds are 'stored' and can be easily thought of as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Description : What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor ... as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Last Answer : Silver nitrate solution is kept in brown bottles in laboratory because - (1) it reacts with ordinary white bottles (2) brown bottles stops the passage of light through it (3) brown bottles do not react with it (4) brown bottles react with it

Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Description : Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Last Answer : (B) Low temperature coke

Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000

Description : Calorific value of bituminous coal may be around __________ Kcal/kg. (A) 500 (B) 1500 (C) 6500 (D) 20000

Last Answer : (C) 6500

Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Description : Anthracite coal (A) Contains more volatile matter than bituminous coal (B) Ignites more easily than bituminous coal (C) Is essentially a coking coal (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Last Answer : (D) Burns with short, bluish, yellow-tipped flame producing very little smoke

Which of the following can be made into briquettes without the use of a binder? (A) Lignite (B) Bituminous coal (C) Anthracite coal (D) None of these

Description : Which of the following can be made into briquettes without the use of a binder? (A) Lignite (B) Bituminous coal (C) Anthracite coal (D) None of these

Last Answer : (A) Lignite

Which of the following has the highest calorific value? (A) Lignite (B) Sub-bituminous coal (C) Anthracite (D) Peat

Description : Which of the following has the highest calorific value? (A) Lignite (B) Sub-bituminous coal (C) Anthracite (D) Peat

Last Answer : (C) Anthracite

The most matured coal out of the following is(A) Lignite (B) Semi-anthracite (C) Sub-bituminous (D) Bituminous

Description : The most matured coal out of the following is (A) Lignite (B) Semi-anthracite (C) Sub-bituminous (D) Bituminous

Last Answer : (B) Semi-anthracite

Hard coke is manufactured from (A) Lignite (B) Bituminous coal (C) Semi-anthracite (D) Anthracite

Description : Hard coke is manufactured from (A) Lignite (B) Bituminous coal (C) Semi-anthracite (D) Anthracite

Last Answer : (B) Bituminous coal