In ATM,______ is for packets requiring no sequencing and noerror control mechanism. A) AAL1 B) AAL2C)AAL3/4D)AAL5

In ATM,______ is for packets requiring no sequencing and noerror control mechanism.
A)
AAL1
B)
AAL2
C)
AAL3/4
D)
AAL5
by

1 Answer

Answer :

AAL5
by

Related questions

In ATM,_______is for short packets. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,_______is for short packets. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL2

In ATM,______ is for constant-bit-ratedata. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,______ is for constant-bit-ratedata. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL1

In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL3/4

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Description : ______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Last Answer : A. Flooding

In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above

Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above

Last Answer : ATM

A(n) ______ is theinterface between auser and an ATM switch. A) UNI B) NNI C) NNN D) None of the above

Description : A(n) ______ is theinterface between auser and an ATM switch. A) UNI B) NNI C) NNN D) None of the above

Last Answer : UNI

______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : ATM

Structured programming codes includes ? sequencing alteration iteration multiple exit from loops only A, B and C

Description : Structured programming codes includes ? sequencing alteration iteration multiple exit from loops only A, B and C

Last Answer : only A, B and C

1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6TC) MLT-3 D) Manchester

Description : 1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6T C) MLT-3 D) Manchester

Last Answer : 4D-PAM5

Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Description : Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Last Answer : 7C:56:21:1A:DE:F4

Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Description : Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Last Answer : 43:7B:6C:DE:10:0

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

In open-loop control, policies are applied to __________ A. Remove after congestion occurs B. Remove after sometime C. Prevent before congestion occurs D. Prevent before sending packets

Description : In open-loop control, policies are applied to __________ A. Remove after congestion occurs B. Remove after sometime C. Prevent before congestion occurs D. Prevent before sending packets

Last Answer : C. Prevent before congestion occurs

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Which command does not show that two devices are failing to route packets between them successfully? A. show interface B. trace C. telnet D. ping

Description : Which command does not show that two devices are failing to route packets between them successfully? A. show interface B. trace C. telnet D. ping

Last Answer : show interface

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Last Answer : exactly 10

A ________ switch is a multistageswitch with microswitches at each stagethat route the packets based on theoutput port representedas a binary string. A) crossbar B) TSI C) banyan D) none of the above

Description : A ________ switch is a multistageswitch with microswitches at each stagethat route the packets based on theoutput port representedas a binary string. A) crossbar B) TSI C) banyan D) none of the above

Last Answer : banyan

The packets switching concept was first proposed A. in the late1980s for the Defense Ministry of US. B. in the early 1960s for military communication systems, mainly to handle speech C. in the late 1950s for Defense Ministry of US D. All of theabove E. None of the above

Description : The packets switching concept was first proposed A. in the late1980s for the Defense Ministry of US. B. in the early 1960s for military communication systems, mainly to handle speech C. in the late 1950s for Defense Ministry of US D. All of theabove E. None of the above

Last Answer : in the early 1960s for military communication systems, mainly to handle speech

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Description : A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Last Answer : hot potatorouting

Consider the assertions given below. Which among them prove to be beneficial for Persistent HTTP connections? A. Reduction in latency over the sub- sequent requests B. Pipeline-oriented connection over the requests and responses C. Increase in number of packets due to TCP opens D. Prevention in opening and closing of some TCP connections a. A & B b. C & D c. A & C d. B & B

Description : Consider the assertions given below. Which among them prove to be beneficial for Persistent HTTP connections? A. Reduction in latency over the sub- sequent requests B. Pipeline-oriented connection over the requests and responses C. Increase ... TCP connections a. A & B b. C & D c. A & C d. B & B

Last Answer : a. A & B

Which of the following system calls results in the sending of SYN packets? a. socket b. bind c. listen d. connect

Description : Which of the following system calls results in the sending of SYN packets? a. socket b. bind c. listen d. connect

Last Answer : d. connect

UDP packets are called as _________ a. Segments b. Checksum c. Frames d. Datagrams

Description : UDP packets are called as _________ a. Segments b. Checksum c. Frames d. Datagrams

Last Answer : d. Datagrams

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

Packets will be transferred in how many types? a. 5 types b. 4 types c. 2 types d. 3 types

Description : Packets will be transferred in how many types? a. 5 types b. 4 types c. 2 types d. 3 types

Last Answer : d. 3 types

Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Last Answer : a. Host

Which of the following is not correct in relation to multi-destination routing? a. is same as broadcast routing b. contains the list of all destinations c. data is not sent by packets d. there are multiple receivers

Description : Which of the following is not correct in relation to multi-destination routing? a. is same as broadcast routing b. contains the list of all destinations c. data is not sent by packets d. there are multiple receivers

Last Answer : c. data is not sent by packets

The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Description : Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Last Answer : b. 250

Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length of packet increases, efficiency of channel also increases. c. Distance between sender and receiver is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Description : Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length ... is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Last Answer : Distance between sender and receiver is directly proportional to efficiency of channel.

Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B is 128 kbps. What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Description : Station A uses 32 byte packets to transmit messages to Station B using a sliding window protocol. The round trip delay between A and B is 80 milliseconds and the bottleneck bandwidth on the path between A and B ... What is the optimal window size that A should use? a. 20 b. 40 c. 160 d. 320

Last Answer : b. 40

State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). An IPV6 packet consists of an IPV6 header and an IPV6 payload. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

PGP is one of the protocols used to provide security at the ……….. It is designed to create authenticated and confidential ………. A. application layer, e-mails. B. Network layer, packets C. application layer, packets D. network layer , e-mails

Description : PGP is one of the protocols used to provide security at the ……….. It is designed to create authenticated and confidential ………. A. application layer, e-mails. B. Network layer, packets C. application layer, packets D. network layer , e-mails

Last Answer : A. application layer, e-mails

Each IP address can identify the ………... or ………... of IP packets. A. source, destination B. length, size C. source, length D. Size , destination

Description : Each IP address can identify the ………... or ………... of IP packets. A. source, destination B. length, size C. source, length D. Size , destination

Last Answer : A. source, destination

Flooding is also a……... algorithm, usually generates ………... of duplicate packets. A. Static, vast number B. dynamic , vast number C. Static, less number D. dynamic , less number

Description : Flooding is also a……... algorithm, usually generates ………... of duplicate packets. A. Static, vast number B. dynamic , vast number C. Static, less number D. dynamic , less number

Last Answer : A. Static, vast number

The subnet gets increasingly loaded with packets causing increase in delay in the delivery of packets, which can lead to more retransmission, and ultimately increasing more and more traffic. This is a concept called as _________ A. blockage B. Traffic jam. C. Congestion D. both a and b

Description : The subnet gets increasingly loaded with packets causing increase in delay in the delivery of packets, which can lead to more retransmission, and ultimately increasing more and more traffic. This is a concept called as _________ A. blockage B. Traffic jam. C. Congestion D. both a and b

Last Answer : C. Congestion

With Slotted Aloha, a …………. sends out small clock tick packets to the outlying stations. A. distributed clock B. synchronized clock C. centralized clock D. Digital clock

Description : With Slotted Aloha, a …………. sends out small clock tick packets to the outlying stations. A. distributed clock B. synchronized clock C. centralized clock D. Digital clock

Last Answer : C. centralized clock

In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A. Packet which are not lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Last Answer : B. Only those packets which are lost or corrupted

User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer

The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Last Answer : B. High-level data link control

User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Last Answer : all UDP packets are treated independently by transport layer

The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

A __________ is a device that forwards packets between networks by processing the routing information included in the packet.a) bridge b) firewall c) router d) hub

Description : A __________ is a device that forwards packets between networks by processing the routing information included in the packet. a) bridge b) firewall c) router d) hub

Last Answer : c) router