Radial drilling machine

Radial drilling machine
by

1 Answer

Answer :

Radial drilling machine: A radial drilling machine is illustrated in Fig. This is really meant to drill holes in bigger and heavier work pieces, which cannot be manipulated so that the centre of the hole may be aligned with the drilling spindle. In this case, the drilling head is mounted on a radial arm. The radial arm can be rotated around the round column and the drilling head can be moved in or out on the radial arm. The work piece is kept on the table which is really an integral part of the base and by the combined movement of the radial arm and the drilling head (think of the polar coordinates θ, r), any point on the work piece can be covered and a hole drilled at the required location, without shifting the heavy work piece.


image

by

Related questions

Types of slotting machine

Description : Types of slotting machine

Last Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

Define Feed and speed in shaping machine

Description : Define Feed and speed in shaping machine

Last Answer : 1) Feed: Feed (S) is the relative movement of the work or tool in a direction perpendicular to the axis of reciprocation of the ram per double stroke. It is expressed in mm per stroke. 2) Speed: ... speed is the speed at which the metal is removed by the cutting tool in a period of one minute.

Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Description : Flywheel is used in (A) Punch press (B) Drilling machine (C) Surface grinder (D) Milling machine

Last Answer : (A) Punch press

List any four drilling machine used in industrial sector.

Description : List any four drilling machine used in industrial sector.

Last Answer : Classification of drilling machine: 1. Portable drilling machine 2. Bench drilling machine 3. Sensitive drilling machine 4. Upright or column drilling machine 5. Radial drilling machine 6. ... machine 8. Vertical drilling machine 9. Automatic drilling machine 10. Deep hole drilling machine

Give the block diagram of CNC based drilling machine.

Description : Give the block diagram of CNC based drilling machine.

Last Answer : Ans:-   OR  

Describe the construction and working of bench drilling machine with block diagram.

Description : Describe the construction and working of bench drilling machine with block diagram.

Last Answer : Major Parts of Bench Drilling Machine : Functions of Parts: i. Base: It supports the column, which in turn, support the table and head etc. ii. Spindle: It is made up of alloy steel. It ... : It is vertical round or box section, which rests on the base and supports the head and the table.

Draw block diagram for CNC drilling machine and explain its working.

Description : Draw block diagram for CNC drilling machine and explain its working.

Last Answer : Block diagram consist of the following points:  Machine tool with DC servo motor as feedback element. The transducer is added as adaptive control application.  The auxiliary controller ... line.  The interrupt pulses are generated by TBG and supplied to computer through inter

List advantages and disadvantages of CNC based drilling machine.

Description : List advantages and disadvantages of CNC based drilling machine.

Last Answer : Advantages : Reduce the making/production cost Increases the productivity CNC improves the production Low skill operator is required High accuracy and repeatability Complex machining operations are also ... Its replacement is difficult, that it is difficult to change old system to new system

Thread cutting operation

Description : Thread cutting operation

Last Answer : Thread cutting operation:- The principle of thread cutting is to produce a helical groove on cylindrical/conical surfaces by feeding the tool longitudinally when the job is revolved between centers. In this operation, ... The longitudinal feed is equal to the pitch of the thread to be cut.

Properties of moulding sand are

Description : Properties of moulding sand are

Last Answer : Properties of moulding sand are: i) Cohesiveness or (strength) of sand,  ii) Permeability (Porosity) iii) Plasticity  iv) Thermal Stability v) Refractoriness  vi) Flow ability, vii) ... be reusable and should produce good casting surface. x) It should be bad conductor of heat.

Combination Dies

Description : Combination Dies

Last Answer : Combination Dies: In this die more than one operation may be performed at one station. It is difficult from compound die in that in this die, a cutting operation is combined with a bending or drawing ... a complete tool consists of a pair of mating members for producing work in a press.

Cutting Speed

Description : Cutting Speed

Last Answer : Cutting Speed: - It is the speed at which the metal is removed by the tool from the work piece. In lathe it is the peripheral speed of the work past the cutting tool expressed in meter per ... degree of surface finish, rigidity of the machine tool being used, and type of coolant being used. 

Properties of plastics

Description : Properties of plastics

Last Answer : Properties of plastics:- 1. Light in weight. 2. Easy workability. Easy to shape and mould. 3. Highly resistant to corrosion. 4. Highly resistant to abrasion., moistuer and greases. 5. Good ... 10. Low fabrication cost. 11. Good dimensional stability. 12. Can be made transparent or coloured.

Advantages/Merits of Cold Working

Description : Advantages/Merits of Cold Working

Last Answer : Advantages/Merits of Cold Working 1. Cold working increases the strength and hardness of the material due to the strain hardening which would be beneficial in some situations. there is no possibility ... costs are high and as such it is used when large quantities of similar components are required

what is Forging ?

Description : what is Forging ?

Last Answer : Forging : Forging is defined as controlled plastic deformation of metals at elevated temperatures into a pre-determined size or shape using compressive forces exerted through some type of die by a hammer or press. ... , 4. Upset forging, 5. Swing forging 6. Cored forging, 7. Rotary forging.

Classify presses. Describe one in brief.

Description : Classify presses. Describe one in brief.

Last Answer : A) According to source of power: a) Mechanical press b) Hydraulic press B) According to number of slides: a) Single action press b) Double action press c) Triple action press C) ... perform the necessary operation. The ram is fitted with punch and the job is resting on the bed.

Direct Extrusion process

Description : Direct Extrusion process

Last Answer : Direct Extrusion process Direct extrusion process is shown in fig. The raw material used is a billet. It consists of a press operated ram and a cylinder or container into which the heated ... for extruding long extrudes. 2) Support of the ram becomes a problem as work length increases.

Welding Defects

Description : Welding Defects 

Last Answer : Welding Defects  Welding defects Explanation and causes 1. Cracks Cracks occur when localized stresses exceed the ultimate tensile strength of material. These stresses are developed due to shrinkage ... Too fast a travel, Bad welding technique, Too great a heat build-up.

Types of rolling mills and its applications

Description : Types of rolling mills and its applications

Last Answer : Types of rolling mills and its applications (1) Two-high rolling mill: used in blooming and slabbing mills (2) Three-high rolling mill: used for making plates or sections. (3) Four- ... : This mill is used for rolling stainless steel and other high strength steel sheets of thin gauge.

Differentiate between soldering and brazing

Description : Differentiate between soldering and brazing

Last Answer : Answer: Comparison of brazing and soldering

Safety practices in foundry

Description : Safety practices in foundry

Last Answer : 1. Even trace amounts of MOISTURE and MOLTEN METAL don't mix; Steam explosions are the cause of death in foundries. 2. NEVER put water on a metal fire. This can cause a HUGE EXPLOSION ... operation. 16. Educate yourself beforehand and always be careful of your own and bystander safety.

Single point Cutting tool signature

Description : Single point Cutting tool signature

Last Answer : The shape of a tool is specified in a special sequence and this special sequence is called tool signature. The tool signature is given below (i) Back rake angle (ii) Side rake angle (iii) ... rake, end relief, side relief, end cutting edge, side cutting edge angle and 0.8 mm nose radius.

Explain with neat sketch the working principle of MIG.

Description : Explain with neat sketch the working principle of MIG.

Last Answer : In metal-arc inert gas welding the Weld area is shielded by an effectively inert atmosphere of argon, helium, carbon dioxide, or various other gas mixtures . The consumable bare Wire is fed automatically ... of the molten-weld puddle. Multiple-weld layers can be deposited at the joint. 

Compare between Hot rolling and Cold rolling.

Description : Compare between Hot rolling and Cold rolling.

Last Answer : Hot rolling Cold rolling  Metal is fed to the rolls after being heated above the recrytallization temperature. Metal is fed to the rolls when it is below the recrytallization temperature. ... Hot rolling is the father of the cold rolling. Cold rolling follows the hot rolling.

Explain any four properties of Moulding sand.

Description : Explain any four properties of Moulding sand. 

Last Answer : 1. Porosity: Molten metal always contain a certain amount of dissolved gases, which are evolved when the metal freezes the molten metal coming in contact with the moist sand , generates steam or ... to the casting. Refractoriness is measured by the sinter point of the sand rather than its melting

State the applications of TIG welding.

Description : State the applications of TIG welding.

Last Answer : The applications of TIG welding are as follows: 1. Mostly used to weld aluminum and aluminum alloys. 2. It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc. 3. It is used to welding dissimilar metals. 4. It is mostly used in aerospace industries.

State the applications of rolling.

Description : State the applications of rolling.

Last Answer : Applications of rolling are as follows: 1. Concrete reinforcing bars. 2. Plates. 3. Wire rods. 4. Sheet and strip. 5. Rails. 6. Piping and tubes. 7. Body panels. 8. Construction materials

List any four casting defects.

Description : List any four casting defects.

Last Answer : The various types of casting defects are as follows: 1. Gas Porosity: Blowholes, open holes, pinholes. 2. Shrinkage defects: shrinkage cavity. 3. Mold material defects: Cut and washes, ... Pouring metal defects: Cold shut, misrun, slag inclusion. Metallurgical defects: Hot tears, hot spot.

List any four materials used for pattern making

Description : List any four materials used for pattern making

Last Answer : The various types of materials used are as follows: 1. Wood 2. Metal. 3. Plastic. 4. Plaster. 5. Wax.

List any four accessories used on lathe.

Description : List any four accessories used on lathe.

Last Answer : The various accessories used in lathe are as follows. 1) Lathe centers 2) Carriers or driving dog 3) catch plates 4) Chucks 5) Face plates 6) Angle plates 7) Mandrels 8) Rests

List types of chips produced in machining process.

Description : List types of chips produced in machining process.

Last Answer : The various types of chips produced in machining process are as follows: 1. Continuous chips: According to its name, continuous chips have a continuous segment. . 2. Discontinuous chips or segmental chips: ... chip is same as the continuous chips except a built edge is form at the face of tool.

Without a drill press, what is a trick for drilling a truly vertical hole in board?

Description : Without a drill press, what is a trick for drilling a truly vertical hole in board?

Last Answer : Stand a bubble level near the place-of-drillage, and rest the dorsal edge of the drill against the long edge of the level. Ask a friend to hold the level, if necessary.

Is there anything besides drilling that can be done for a very shallow surface cavity?

Description : Is there anything besides drilling that can be done for a very shallow surface cavity?

Last Answer : Long run PULL it! Get over the drilling, it will only get deeper. get it fixed! Maybe a laser drilling instead. or get Nitrous Oxide.

Your thoughts on offshore oil drilling,now that there is a oil spill in the Gulf of Mexico?

Description : Your thoughts on offshore oil drilling,now that there is a oil spill in the Gulf of Mexico?

Last Answer : answer:My stance on Spilled oil in our oceans is bad has remained unchanged. I also think we can drill in the oceans and still take reasonable precautions to see that these sorts of things don't happen ... make efforts to clean up our messes. That last part is where the US has a bad track record.

Do you think we should expand oil drilling in the United States?

Description : Do you think we should expand oil drilling in the United States?

Last Answer : We already do. We produce lots of natural gas and plenty of crude oil.

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above

Last Answer : b.Subtractive manufacturing

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

What is drilling perfectly, round holes in my tree, they tend to run in a line and the bark is turning black in color

Description : What is drilling perfectly, round holes in my tree, they tend to run in a line and the bark is turning black in color

Last Answer : Bees, boring bees. They boor holes, perfectly round holes into wood.

Explain the following terms : (i) Withering (ii) Plantation Farming (iii) Drilling -Geography

Description : Explain the following terms : (i) Withering (ii) Plantation Farming (iii) Drilling -Geography

Last Answer : (i) Withering: It is involved in the process of making black tea. The tea leaves are spread over shelves called withering racks and air is blown over the leaves to reduce their moisture ... method of sowing seeds at regular interval through a bamboo shaft attached to the plough which make furrows.

What is ‘off-shore drilling’? -SST 10th

Description : What is ‘off-shore drilling’? -SST 10th

Last Answer : The Oil and Natural Gas Commission of India since 1956, has started oil exploration in the off-shore areas which is known as off-shore drilling. In 1973, it has begun drilling for oil in the deep waters off the western coast of Mumbai which is known as Mumbai High.

Name any two important petroleum drilling centres for each of these states: -SST 10th

Description : Name any two important petroleum drilling centres for each of these states: -SST 10th

Last Answer : (i) Ankaleshwar and Kalol (ii) Digboi and Moran.

What is drilling method of cultivation? -SST 10th

Description : What is drilling method of cultivation? -SST 10th

Last Answer : In the drilling method, the seeds are dropped in furrows through a bamboo-shaft attached to the plough.

Which was India’s first mobile offshore drilling platform? -Do You Know?

Description : Which was India’s first mobile offshore drilling platform? -Do You Know?

Last Answer : answer:

Drilling into wood, cooling?

Description : Is it good to use cooling for large wood drilling?

Last Answer : I've never cooled here, it just takes less speed on the drill

What speed to choose when drilling

Description : If I have a small 5 mm iron drill bit, should I give high or low speed? I'll cool with oil. How is it? The smaller the drill the .... the speed? Thanks ZDEMDA

Last Answer : I would say that steel is more suitable at a diameter of 5 mm, a speed of 1600 revolutions and, as a rule, the larger the diameter of the drill, the lower the speed.

Cooling during drilling

Description : I need to drill iron strips on the fence. How do I cool the drill? Should I mix water with oil?

Last Answer : Cool it only with oil, I use fine machine oil (konkor), but you can use any low-viscosity (´sweet´), even cooking oil from the kitchen. : o It is also possible in an emergency with water - the disadvantage is that it corrodes the drilled material - but mainly the drill.

Drilling into the glass.

Description : I need to drill a terrarium. Glass thickness 5 mm and I would drill a hole 7 mm. Would it work somehow? Or is it bullshit?

Last Answer : There are special triangular drills for glass, it should be drilled with cooling.

Is drilling a hole in wood a physical change?

Description : Is drilling a hole in wood a physical change?

Last Answer : Yes, it typically is. Both the wood (sawdust) removed and theremaining block are still wood. They have not changed chemically.For that matter, reducing the whole block to sawdust would not makethe wood a different substance, only a different form.

'Sagar Samrat' is (a) an oil drilling platform in Mumbai High (b) an island in Indian Ocean (c) a ship used for Antarctica expedition (d) a space craft

Description : 'Sagar Samrat' is (a) an oil drilling platform in Mumbai High (b) an island in Indian Ocean (c) a ship used for Antarctica expedition (d) a space craft

Last Answer : Ans: (a)