Combination Dies

Combination Dies
by

1 Answer

Answer :

Combination Dies: In this die more than one operation may be performed at one station. It is difficult from compound die in that in this die, a cutting operation is combined with a bending or drawing operation, due to that it is called combination die. The die may be defined as the female part of a complete tool for producing work in a press. It is also referred to a complete tool consists of a pair of mating members for producing work in a press.

image

by

Related questions

Radial drilling machine

Description : Radial drilling machine

Last Answer : Radial drilling machine: A radial drilling machine is illustrated in Fig. This is really meant to drill holes in bigger and heavier work pieces, which cannot be manipulated so that the centre of the hole ... and a hole drilled at the required location, without shifting the heavy work piece.

Thread cutting operation

Description : Thread cutting operation

Last Answer : Thread cutting operation:- The principle of thread cutting is to produce a helical groove on cylindrical/conical surfaces by feeding the tool longitudinally when the job is revolved between centers. In this operation, ... The longitudinal feed is equal to the pitch of the thread to be cut.

Properties of moulding sand are

Description : Properties of moulding sand are

Last Answer : Properties of moulding sand are: i) Cohesiveness or (strength) of sand,  ii) Permeability (Porosity) iii) Plasticity  iv) Thermal Stability v) Refractoriness  vi) Flow ability, vii) ... be reusable and should produce good casting surface. x) It should be bad conductor of heat.

Cutting Speed

Description : Cutting Speed

Last Answer : Cutting Speed: - It is the speed at which the metal is removed by the tool from the work piece. In lathe it is the peripheral speed of the work past the cutting tool expressed in meter per ... degree of surface finish, rigidity of the machine tool being used, and type of coolant being used. 

Properties of plastics

Description : Properties of plastics

Last Answer : Properties of plastics:- 1. Light in weight. 2. Easy workability. Easy to shape and mould. 3. Highly resistant to corrosion. 4. Highly resistant to abrasion., moistuer and greases. 5. Good ... 10. Low fabrication cost. 11. Good dimensional stability. 12. Can be made transparent or coloured.

Advantages/Merits of Cold Working

Description : Advantages/Merits of Cold Working

Last Answer : Advantages/Merits of Cold Working 1. Cold working increases the strength and hardness of the material due to the strain hardening which would be beneficial in some situations. there is no possibility ... costs are high and as such it is used when large quantities of similar components are required

what is Forging ?

Description : what is Forging ?

Last Answer : Forging : Forging is defined as controlled plastic deformation of metals at elevated temperatures into a pre-determined size or shape using compressive forces exerted through some type of die by a hammer or press. ... , 4. Upset forging, 5. Swing forging 6. Cored forging, 7. Rotary forging.

Classify presses. Describe one in brief.

Description : Classify presses. Describe one in brief.

Last Answer : A) According to source of power: a) Mechanical press b) Hydraulic press B) According to number of slides: a) Single action press b) Double action press c) Triple action press C) ... perform the necessary operation. The ram is fitted with punch and the job is resting on the bed.

Direct Extrusion process

Description : Direct Extrusion process

Last Answer : Direct Extrusion process Direct extrusion process is shown in fig. The raw material used is a billet. It consists of a press operated ram and a cylinder or container into which the heated ... for extruding long extrudes. 2) Support of the ram becomes a problem as work length increases.

Welding Defects

Description : Welding Defects 

Last Answer : Welding Defects  Welding defects Explanation and causes 1. Cracks Cracks occur when localized stresses exceed the ultimate tensile strength of material. These stresses are developed due to shrinkage ... Too fast a travel, Bad welding technique, Too great a heat build-up.

Types of rolling mills and its applications

Description : Types of rolling mills and its applications

Last Answer : Types of rolling mills and its applications (1) Two-high rolling mill: used in blooming and slabbing mills (2) Three-high rolling mill: used for making plates or sections. (3) Four- ... : This mill is used for rolling stainless steel and other high strength steel sheets of thin gauge.

Types of slotting machine

Description : Types of slotting machine

Last Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

Differentiate between soldering and brazing

Description : Differentiate between soldering and brazing

Last Answer : Answer: Comparison of brazing and soldering

Safety practices in foundry

Description : Safety practices in foundry

Last Answer : 1. Even trace amounts of MOISTURE and MOLTEN METAL don't mix; Steam explosions are the cause of death in foundries. 2. NEVER put water on a metal fire. This can cause a HUGE EXPLOSION ... operation. 16. Educate yourself beforehand and always be careful of your own and bystander safety.

Single point Cutting tool signature

Description : Single point Cutting tool signature

Last Answer : The shape of a tool is specified in a special sequence and this special sequence is called tool signature. The tool signature is given below (i) Back rake angle (ii) Side rake angle (iii) ... rake, end relief, side relief, end cutting edge, side cutting edge angle and 0.8 mm nose radius.

Explain with neat sketch the working principle of MIG.

Description : Explain with neat sketch the working principle of MIG.

Last Answer : In metal-arc inert gas welding the Weld area is shielded by an effectively inert atmosphere of argon, helium, carbon dioxide, or various other gas mixtures . The consumable bare Wire is fed automatically ... of the molten-weld puddle. Multiple-weld layers can be deposited at the joint. 

Compare between Hot rolling and Cold rolling.

Description : Compare between Hot rolling and Cold rolling.

Last Answer : Hot rolling Cold rolling  Metal is fed to the rolls after being heated above the recrytallization temperature. Metal is fed to the rolls when it is below the recrytallization temperature. ... Hot rolling is the father of the cold rolling. Cold rolling follows the hot rolling.

Explain any four properties of Moulding sand.

Description : Explain any four properties of Moulding sand. 

Last Answer : 1. Porosity: Molten metal always contain a certain amount of dissolved gases, which are evolved when the metal freezes the molten metal coming in contact with the moist sand , generates steam or ... to the casting. Refractoriness is measured by the sinter point of the sand rather than its melting

State the applications of TIG welding.

Description : State the applications of TIG welding.

Last Answer : The applications of TIG welding are as follows: 1. Mostly used to weld aluminum and aluminum alloys. 2. It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc. 3. It is used to welding dissimilar metals. 4. It is mostly used in aerospace industries.

State the applications of rolling.

Description : State the applications of rolling.

Last Answer : Applications of rolling are as follows: 1. Concrete reinforcing bars. 2. Plates. 3. Wire rods. 4. Sheet and strip. 5. Rails. 6. Piping and tubes. 7. Body panels. 8. Construction materials

List any four casting defects.

Description : List any four casting defects.

Last Answer : The various types of casting defects are as follows: 1. Gas Porosity: Blowholes, open holes, pinholes. 2. Shrinkage defects: shrinkage cavity. 3. Mold material defects: Cut and washes, ... Pouring metal defects: Cold shut, misrun, slag inclusion. Metallurgical defects: Hot tears, hot spot.

List any four materials used for pattern making

Description : List any four materials used for pattern making

Last Answer : The various types of materials used are as follows: 1. Wood 2. Metal. 3. Plastic. 4. Plaster. 5. Wax.

Define Feed and speed in shaping machine

Description : Define Feed and speed in shaping machine

Last Answer : 1) Feed: Feed (S) is the relative movement of the work or tool in a direction perpendicular to the axis of reciprocation of the ram per double stroke. It is expressed in mm per stroke. 2) Speed: ... speed is the speed at which the metal is removed by the cutting tool in a period of one minute.

List any four accessories used on lathe.

Description : List any four accessories used on lathe.

Last Answer : The various accessories used in lathe are as follows. 1) Lathe centers 2) Carriers or driving dog 3) catch plates 4) Chucks 5) Face plates 6) Angle plates 7) Mandrels 8) Rests

List types of chips produced in machining process.

Description : List types of chips produced in machining process.

Last Answer : The various types of chips produced in machining process are as follows: 1. Continuous chips: According to its name, continuous chips have a continuous segment. . 2. Discontinuous chips or segmental chips: ... chip is same as the continuous chips except a built edge is form at the face of tool.

Is it normal to move to assisted living the day after your spouse dies?

Description : Is it normal to move to assisted living the day after your spouse dies?

Last Answer : Well, I don't know the situation. I don't know her age. I don't know how your friend is reacting to her husband's death. Things like that can really knock old people off their rocker. Is she finding it ... her son. Maybe that's what she wanted. 3,000 sq feet is a LOT of house for one old person.

When Trump dies, will people line up to pay respect to him? Will he be honored under the dome of the Capitol?

Description : When Trump dies, will people line up to pay respect to him? Will he be honored under the dome of the Capitol?

Last Answer : Assuming he would lie in state, anything else is just guesswork as he hasn’t finished his first term. Remember, Bush was bashed very hard, too, but in hindsight many Dems no longer find him as offensive.

When Sean Connery dies (he is 88 now), what's a good way to commemorate his life?

Description : When Sean Connery dies (he is 88 now), what's a good way to commemorate his life?

Last Answer : I will mumble all day.

Does the Dalai Lama have the spiritual authority to refuse to be the next Dalai Lama after he dies?

Description : Does the Dalai Lama have the spiritual authority to refuse to be the next Dalai Lama after he dies?

Last Answer : Here is him mentioning that he may not want to Based on other quick research I did, it seems that yes, he has the authority to refuse. He is the highest spiritual authority so I think he has all the ... that was written by Howard C Cutler, M.D and the Dalai Lama. Is a very interesting read so far

Is it more sad when someone beautiful dies?

Description : Is it more sad when someone beautiful dies?

Last Answer : I think it’s more to do with young age than being beautiful!!

If a Starfleet Officer dies, and is reincarnated as a member of a pre-warp civilisation, but retains all memories of her/his previous life, does the Prime Directive still apply to him?

Description : If a Starfleet Officer dies, and is reincarnated as a member of a pre-warp civilisation, but retains all memories of her/his previous life, does the Prime Directive still apply to him?

Last Answer : The Prime Directive doesn't seem to matter to those in the current non reincarnated Starfleet members. So no. However the Temporal prime directive might apply . I wonder about my own reincarnation If giving ... live a perfect life so that I am granted the freedom to make more changes to the thread.

Roger Moore, actor and the second best James Bond, dies at age 89. Join me in celebrating his work?

Description : Roger Moore, actor and the second best James Bond, dies at age 89. Join me in celebrating his work?

Last Answer : He was always keeping the British end up.

If you pet dies in an operation are you still billed for the effort?

Description : If you pet dies in an operation are you still billed for the effort?

Last Answer : The vet has costs, win or lose. Yeah, you pay.

What do they do with the body if someone dies and they can't be buried for a week or two?

Description : What do they do with the body if someone dies and they can't be buried for a week or two?

Last Answer : answer:Keep her on the shelf in the fridge. She's been embalmed, so there is no need to do anything except keep the body cool. There are a lot of places where people can't be buried in the winter ... . They just store the bodies in the basement or in a back room until the ground thaws in the spring.

Do you mourn the loss of a video game character when one dies?

Description : Do you mourn the loss of a video game character when one dies?

Last Answer : Everyone mourned Aerith/Aeris. My brother named his daughter after her.

If one dies before the year is up, was their New Year celebrating for naught?

Description : If one dies before the year is up, was their New Year celebrating for naught?

Last Answer : no.

Is anyone else tired of their Facebook feed being overrun by memorials whenever a celebrity dies?

Description : Is anyone else tired of their Facebook feed being overrun by memorials whenever a celebrity dies?

Last Answer : The worst is when it suggests you’re heartless & uncaring if you scroll past, shut the fuck up already! Yep, i’m on FB now, relented

Another great one dies - Maureen O'hara at age 95. Join me in wishing her a fond farewell.

Description : Another great one dies - Maureen O'hara at age 95. Join me in wishing her a fond farewell.

Last Answer : I just watched the spanking scene in McClintock where John Wayne paddles her but food. haha RIP Maureen, we should all be so lucky to go in our sleep at age 95.

If your S/O dies will you be able to move on?

Description : If your S/O dies will you be able to move on?

Last Answer : answer:Both. But, you know, in reverse order. I think before kids, I would just be a complete mess. After kids, I don’t think I’d have the “luxury” of being a complete mess. When little humans are dependent on you, you just got to get your shit together.

What does Mama bird do if one of her chicks dies?

Description : What does Mama bird do if one of her chicks dies?

Last Answer : Handling a fallen chick is often a bad idea because one may give the bird a human scent that will cause it to be ejected from the nest. When fledglings prematurely leave their nest, its ... feed it. If potential prey approaches their prodigy's location, the parents will attempt to distract it.

Is it hard for you to delete media contact when someone dies?

Description : Is it hard for you to delete media contact when someone dies?

Last Answer : You can memorialize his Facebook account.

On a macabre note, do you ever think about the fact that a person who dies young never ages?

Description : On a macabre note, do you ever think about the fact that a person who dies young never ages?

Last Answer : That is totally wacked. I say as I age there’s one way to cure it, but it’s worse than the alternative. Or as golfers say“I’m on the right side of the dirt”.

How hard will it be for you when your Pet dies?

Description : How hard will it be for you when your Pet dies?

Last Answer : I don't know that Chaos is dead, and I've found a lot of comfort in thinking that he's with someone who loves him. My mom got me a new kitten for Christmas, and I love him so much already. I wouldn't ... When I lost Asher the pain comes in big waves. When I think I'm okay, I realize that I'm not.

What happens when someone dies?

Description : What happens when someone dies?

Last Answer : answer:Call 911 to have the paramedics come out to make sure. They'll have a coroner come out if the person is dead, or they'll take the body to the hospital. Or call the police. You need someone ... of things on file with a funeral home, so when my dad died there wasn't any real decision making.

When someone dies, why do some people act like they were much closer to them than they really were?

Description : When someone dies, why do some people act like they were much closer to them than they really were?

Last Answer : Death throws life into sharp relief, especially its fragility. Tends to downplay a lot.

Do you wait until your outside air conditioning unit dies, or do you go ahead and replace it knowing it is on its last leg?

Description : Do you wait until your outside air conditioning unit dies, or do you go ahead and replace it knowing it is on its last leg?

Last Answer : answer:I would start shopping for a new AC, but I would try to hold out until Autumn when the temps start to fall to put it in if possible. Then you would have the best chance of getting a new AC ... early, you could end up sweating or paying a premium to get if fixed the hottest week of the year.

Who decides how the operatic heroine dies?

Description : Who decides how the operatic heroine dies?

Last Answer : I love this Q! And I can sort-of answer it I had a friend in Seattle who worked in various small opera companies, and this subject actually came up once. She told me that it was usually ... the verticaler the better.) As far as I remember, realism was never mentioned. Or probably even thought of.

What usually happens when one dies in their sleep?

Description : What usually happens when one dies in their sleep?

Last Answer : I think it’s usually due to old age. They just stop.

If someone dies with their eyes open does the lens still focus an image on the retina?

Description : If someone dies with their eyes open does the lens still focus an image on the retina?

Last Answer : I’m sure it does until the brain stops being able to process that image.. making it a moot point.

Who is responsible for credit card debit when someone dies?

Description : Who is responsible for credit card debit when someone dies?

Last Answer : The estate pays all debts before any inheritance is handed over.