What are the advantages of PVC insulated cable?

What are the advantages of PVC insulated cable? 
by

1 Answer

Answer :

a. Plumbing is not required. Joints can be made easily.

b. As PVC is light the injury caused to it while laying is less.

c. It is corrosion resistant.

d. It has high fire retarding property.

e. It does not break down even if moisture enters. 
by

Related questions

In PVC insulated cables, PVC stands for___________.

Description : In PVC insulated cables, PVC stands for___________. A. Ploy Voltage Capacitor B. Poly Vinyl Capacitor C. Primary Voltage Capacitor D. Polyvinyl chloride

Last Answer : In PVC insulated cables, PVC stands for Polyvinyl chloride.

What are the parts of paper insulated lead covered cable?

Description : What are the parts of paper insulated lead covered cable?

Last Answer : a. Core. b. Insulation of cable. c. Metallic sheath. d. Bedding. e. Armouring. f. Serving.

Gas Insulated Substations Advantages Disadvantages

Description : Gas Insulated Substations Advantages Disadvantages

Last Answer : Gas Insulated Substations (GIS): Gas Insulated Substations (GIS) are differ from Air Insulated Substations (substations we usually see) such that all the substation equipment such as busbars, circuit breakers ... in the pressure of the SF6 gas in any module results in flash overs and faults

In twisted pair cable, two insulated wires are twisted around each other which provides protection against noise. Explain. -Technology

Description : In twisted pair cable, two insulated wires are twisted around each other which provides protection against noise. Explain. -Technology

Last Answer : Twisting the cables keep them close together so that, any external magnetic fields must cross both cable at the same time, so the interference created in one cable is cancelled by the almost exact opposite amount of interference in the other.

What do you call a cable consisting of twisted pairs of conductors, each separately insulated? A. Microstrip line B. Strip line C. Quad D. Coaxial cable

Description : What do you call a cable consisting of twisted pairs of conductors, each separately insulated? A. Microstrip line B. Strip line C. Quad D. Coaxial cable

Last Answer : C. Quad

What is the full form of PVC cable ?

Description : What is the full form of PVC cable ?

Last Answer : Polyvinyl chloride

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Last Answer : Answer: A

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the machine secured B. millivolt meter and a jumper with the machine running C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the ... C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Last Answer : Answer: B

One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Description : One of the generator bearing shells is generally insulated from the end housing in order to prevent _____________. A. rapid brush wear B. residual magnetism leak off C. excessive field winding heat D. circulation of shaft currents

Last Answer : Answer: D

One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Description : One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Last Answer : Answer: D

When changing fuses and the spring clips are found to have lost their grip, they should be replaced or _____________. A. tightened firmly with insulated pliers B. clip clamps should be used C. wired closed with uninsulated, varnished copper wire D. carefully bent back to their original shapes

Description : When changing fuses and the spring clips are found to have lost their grip, they should be replaced or _____________. A. tightened firmly with insulated pliers B. clip clamps should be used C. wired closed with uninsulated, varnished copper wire D. carefully bent back to their original shapes

Last Answer : Answer: B

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

When a transformer is used to step down voltage, the low voltage winding is _____________. A. part of the core B. the primary coil C. not insulated D. the secondary coil

Description : When a transformer is used to step down voltage, the low voltage winding is _____________. A. part of the core B. the primary coil C. not insulated D. the secondary coil

Last Answer : Answer: D

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

In an impressed current cathodic protection system, the anode is ____________. A. connected to the hull and deteriorates with time B. insulated from the hull and does not waste away C. connected to the hull but does not waste away D. insulated from the hull but deteriorates with time

Description : In an impressed current cathodic protection system, the anode is ____________. A. connected to the hull and deteriorates with time B. insulated from the hull and does not waste away C. connected to the hull but does not waste away D. insulated from the hull but deteriorates with time

Last Answer : Answer: B

A 'dead front' switchboard is one _____________. A. without switches on it B. with insulated switches and no exposed terminals C. without circuit breakers D. without safety hand rails nor rubber mats

Description : A 'dead front' switchboard is one _____________. A. without switches on it B. with insulated switches and no exposed terminals C. without circuit breakers D. without safety hand rails nor rubber mats

Last Answer : Answer: B

A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Description : A tubular fuse should always be removed from a fuse panel with _____________. A. a screwdriver B. a pair of insulated metal pliers C. any insulated object D. fuse pullers

Last Answer : Answer: D

To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws of the instrument around the insulated conductor C. connect the voltage test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Description : To properly use a hook-on-type volt/ammeter to check current flow, you must FIRST _____________. A. de-energize the circuit to allow connection of the instrument in series B. hook the jaws ... test leads to the appropriate terminals D. short the test leads and calibrate the instrument to zero

Last Answer : Answer: B

Locations where Gas Insulated Substation is preferred

Description : Locations where Gas Insulated Substation is preferred

Last Answer : Gas Insulated Substations are preferred in the places where land requirement for the substation is difficult such as in populated areas and highly polluted areas where outdoor switchyard is not ... pollution and saline environment. Under such case indoor GIS substation is very much helpful.

Define insulated wire.

Description : Define insulated wire. 

Last Answer : Insulated wire: A conductor or multi-stranded conductor which has a insulating material on it is called a insulated wire. 

Define unprotected insulated wire.

Description : Define unprotected insulated wire. 

Last Answer : Unprotected insulated wire: Unprotected insulated wire is which the insulation of the wire is not covered by a protective sheathing to prevent it from mechanical damage. 

For LV applications (below 1 kV), ______________ cables are used. (A) Paper insulated. (B) Plastic. (C) Single core cables. (D) Oil filled.

Description : For LV applications (below 1 kV), ______________ cables are used. (A) Paper insulated. (B) Plastic. (C) Single core cables. (D) Oil filled.

Last Answer : Ans: C For low voltage applications single core cables are suitable.

Are there any advantages to PVC windows?

Description : Are there any advantages to PVC windows?

Last Answer : Have you decided to change your windows to new ones and don't know where to start? Let's start with the fact that windows are a very important part of any house or apartment, thanks to ... Another thing you need to pay attention to when ordering is that the profile must meet all quality standards.

Why fuses with fusing factor more than 1.5 is not allowed in PVC cables?

Description : Why fuses with fusing factor more than 1.5 is not allowed in PVC cables? 

Last Answer : Because PVC cables have low thermal capacity than paper cables. Full loading of PVC only possible if it has close excess current protection (i.e.) Fusing Factor = 1.5 

Does anyone know where I can find an insulated coffee mug that is not made for a cup holder?

Description : Does anyone know where I can find an insulated coffee mug that is not made for a cup holder?

Last Answer : Amazon has a few. There are a lot of those tall narrow ones, but I saw a few more “portly” mugs.

How low can the temperature go in an unheated but insulated cabin in order to damage LCD TV, phone, and computer?

Description : How low can the temperature go in an unheated but insulated cabin in order to damage LCD TV, phone, and computer?

Last Answer : answer:Are you the only one closing in on ten thousand Lurve? That is impressive! I think the computer can survive in very low tempts.. Not sure about the rest. I’m an IT girl and I know we have the AC on the severs 24/7.

Carefully read the following descriptions and identify what is being talked about. 1. It consists of two insulated wires twisted around each other, -Technology

Description : Carefully read the following descriptions and identify what is being talked about. 1. It consists of two insulated wires twisted around each other, -Technology

Last Answer : 1. Twisted pair cable2. Crosstalk3. Radiowave4. Wired communication channel5. Resource sharing

Can a panel apartment be insulated?

Description : Can panel homes be insulated?

Last Answer : Thermal insulation is usually applied from the outside. If you are thinking of soundproofing, they are usually used with a soundproofing sponge. You can try, but I don’t think it will insulate much.

Should the house be insulated? 45 cm wall thickness

Description : The situation is that the wall thickness is 45 cm (ytong), we can not dismantle the insulated house. Thank you in advance for your help.

Last Answer : I supposedly don't need to insulate it anymore, its thermal insulation is so good, but if you don't have a problem doing it, I think you should do it. The good can be even better and will definitely pay off over the years. 

Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Description : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Last Answer : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each ... x C. y = x-1 D. y = -x+1

Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Description : Where is the statement of all pipes connected to a storage vessel should be insulated for up to a metre in length is a requirement of Building Regulations Part?

Last Answer : P

Why are electric wires insulated?

Description : Why are electric wires insulated?

Last Answer : to keep the electricity into keep other things out (e.g. water, people, other wires)to prevent short circuits to nearby wiresto prevent electricutionto prevent firesetc.

In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Description : In order to find the specific heat capacity of an unknown material a 50 g piece is heated to 80 degrees Celsius and fully immersed in a well insulated calorimeter filled with 100 g of water at 10 degr?

Last Answer : Assuming that the full question, which the questioner failed to post, is given in the Discussion, below.Taking the specific heat capacity of water as 4.2 Joules per gram per degree C, the metal has a specific heat capacity as approx 0.68 Joules/(g °C).

Should copper pipes be insulated?

Description : Should copper pipes be insulated?

Last Answer : Insulating your copper pipes is a great idea. Insulating with foam will insure less heat loss which save energy and probably take a few bucks off your electricity bill.

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

Radiation heat losses from satisfactorily insulated high pressure boiler may be about __________ percent. (A) 1 (B) 7 (C) 18

Description : Radiation heat losses from satisfactorily insulated high pressure boiler may be about __________ percent. (A) 1 (B) 7 (C) 18

Last Answer : (B) 7

________cable consists of two insulated copper wires twistedtogether. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above

Description : ________cable consists of two insulated copper wires twistedtogether. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above

Last Answer : Twisted-pair

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

A system in which there is exchange of energy but not of mass, is called a/an __________ system. (A) Isolated (B) Open (C) Insulated (D) Closed

Description : A system in which there is exchange of energy but not of mass, is called a/an __________ system. (A) Isolated (B) Open (C) Insulated (D) Closed

Last Answer : (D) Closed

High pressure steam is expanded adiabatically and reversibly through a well insulated turbine, which produces some shaft work. If the enthalpy change and entropy change across the turbine are represented by ΔH and ΔS respectively for this process: (A) Δ H = 0 and ΔS = 0 (B) Δ H ≠ 0 and ΔS = 0 (C) Δ H ≠ 0 and ΔS ≠ 0 (D) Δ H = 0 and ΔS ≠ 0

Description : High pressure steam is expanded adiabatically and reversibly through a well insulated turbine, which produces some shaft work. If the enthalpy change and entropy change across the turbine are represented by ΔH and ΔS respectively for this process: ... (C) Δ H ≠ 0 and ΔS ≠ 0 (D) Δ H = 0 and ΔS ≠ 0

Last Answer : (B) Δ H ≠ 0 and ΔS = 0

1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Last Answer : (C) 274 K

A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just next to pipe (i.e., inside) (B) The better insulating material should be put outside (C) Either of the insulating material could be put on either side (D) Steam temperature is considered before deciding as to which insulating material is to be put inside (i.e., just next to the pipe)

Description : A steam pipe is intended to be insulated with two layers of insulating materials of different thermal conductivities. For minimum heat transfer to take place (A) The better insulation material should be put just ... to which insulating material is to be put inside (i.e., just next to the pipe)

Last Answer : (A) The better insulation material should be put just next to pipe (i.e., inside)

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

The entrained concrete is used in lining walls and roofs for making (A) Heat insulated (B) Sound insulated (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : The entrained concrete is used in lining walls and roofs for making (A) Heat insulated (B) Sound insulated (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

Cables for 220 kV lines are invariably (a) mica insulated (b) paper insulated (c) compressed oil or compressed gas insulated (d) rubber insulated (e) none of the above

Description : Cables for 220 kV lines are invariably (a) mica insulated (b) paper insulated (c) compressed oil or compressed gas insulated (d) rubber insulated (e) none of the above

Last Answer : (c) compressed oil or compressed gas insulated