A multiple effect evaporator as compared to a single effect evaporator of the same capacity has (A) Lower heat transfer area (B) Lower steam economy (C) Higher steam economy (D) Higher solute concentration in the product

A multiple effect evaporator as compared to a single effect evaporator of
the same capacity has
(A) Lower heat transfer area
(B) Lower steam economy
(C) Higher steam economy
(D) Higher solute concentration in the product
by

1 Answer

Answer :

(C) Higher steam economy
by

Related questions

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Description : A backward feed multiple effect evaporator is better than forward feed for concentrating cold feed, because it provides (A) Higher economy (B) Lower capacity (C) Both (A) & (B) (D) Lower economy

Last Answer : (A) Higher economy

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature (C) Double pipe heat exchangers are mostly used in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Description : Pick out the wrong statement. (A) Economy of a multiple effect evaporator is not influenced by the boiling point elevation (B) Two identical cubes of iron and copper will have the same heat ... in the field of refrigeration (D) Finned tube heat exchangers are suitable for heating air by steam

Last Answer : (B) Two identical cubes of iron and copper will have the same heat content under the same conditions of temperature

Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Description : Economy of a multiple effect evaporator is not influenced much by the (A) Boiling point elevations (B) Temperature of the feed (C) Rate of heat transfer (D) Ratio of the weight of the thin liquor to thick liquor

Last Answer : (A) Boiling point elevations

Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Economy of a multiple effect evaporator depends upon the (A) Heat balance consideration (B) Rate of heat transfer (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Heat balance consideration

Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Description : Reason for operating an evaporator in multiple effects is to secure (A) Increased steam economy (B) Decreased steam consumption (C) Both (A) and (B) (D) Increased capacity

Last Answer : (C) Both (A) and (B)

In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Description : In a multiple effect evaporator, the effect of boiling point elevation is to (A) Reduce the capacity (B) Reduce the economy (C) Increase the economy (D) None of these

Last Answer : (A) Reduce the capacity

or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Description : or the same heat transfer area and the terminal conditions, the ratio of the capacities of a single effect evaporator to a triple effect evaporator is (A) 3 (B) 0.33 (C) 1 (D) 1.33

Last Answer : (C) 1

What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Description : What is the steam economy in case of a single effect evaporator system? (A) 1 (B) > 1 (C) < 1 (D) 0.1

Last Answer : (C) < 1

Small scale evaporation is done in a (A) Heat exchanger (B) Condenser(C) Multiple effect evaporator(D) Steam jacketed kettle

Description : Small scale evaporation is done in a (A) Heat exchanger (B) Condenser (C) Multiple effect evaporator (D) Steam jacketed kettle

Last Answer : (D) Steam jacketed kettle

The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Description : The number of kg vaporised per kg of steam fed to the evaporator is defined as (A) Capacity (B) Rate of evaporation (C) Economy (D) Rate of vaporisation

Last Answer : (C) Economy

Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively).(A) C/E (B) E/C (C) CE (D) 1/CE

Description : Steam consumption in kg/hr in case of an evaporator is given by (where, C & E are capacity the economy of the evaporator respectively). (A) C/E (B) E/C (C) CE (D) 1/CE

Last Answer : (A) C/E

Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Description : Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Last Answer : (A) Capacity

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

In a forward feed multiple effect evaporator unit (A) Viscosity of liquid is highest in first effect (B) Transfer from effect to effect is done by pumps (C) No pump is required to withdraw the product from the last effect (D) None of these

Description : In a forward feed multiple effect evaporator unit (A) Viscosity of liquid is highest in first effect (B) Transfer from effect to effect is done by pumps (C) No pump is required to withdraw the product from the last effect (D) None of these

Last Answer : (D) None of these

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Description : Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Last Answer : (B) Increase the steam economy & the capacity

In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Description : In a single evaporator system, the steam economy __________ by creating vacuum in the evaporator. (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease, depends on the vacuum

Last Answer : (A) Increases

Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Description : Economy of an evaporator is influenced by the (A) Steam pressure (B) Feed temperature (C) Number of effect (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Steam economy in case of a triple effect evaporator will be (A) 1(B) < 1 (C) > 1 (D) Between 0 and 1

Description : Steam economy in case of a triple effect evaporator will be (A) 1 (B) < 1 (C) > 1 (D) Between 0 and 1

Last Answer : (C) > 1

Multiple effect evaporation accounts for (A) Steam economy (B) Lower operating costs(C) Investment economy(D) None of these

Description : Multiple effect evaporation accounts for (A) Steam economy (B) Lower operating costs (C) Investment economy (D) None of these

Last Answer : (A) Steam economy

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Description : For a cold dilute feed to produce thick viscous liquor, backward feeding as compared to forward feeding results in (A) Increased economy (B) Decreased economy (C) Lower capacity (D) No effect on economy

Last Answer : (A) Increased economy

Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Description : Evaporation by thermo compression results in the (A) Saving of steam (B) Realisation of multiple effect economy in a single effect (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Description : Evaporation of 1kg of water from a solution in a single effect evaporator requires about __________ kg of steam. (A) 0.4 - 0.6 (B) 1-1.3 (C) 1.8-2 (D) 2 - 2.4

Last Answer : (B) 1-1.3

In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Description : In a single effect evaporator, the economy is (A) 1 (B) < 1 (C) > 1 (D) None of these

Last Answer : (B) < 1

Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

In a forward feed multiple effect evaporator, the pressure is (A) Highest in last effect (B) Lowest in last effect (C) Same in all effects (D) Dependent on the number of effects

Description : In a forward feed multiple effect evaporator, the pressure is (A) Highest in last effect (B) Lowest in last effect (C) Same in all effects (D) Dependent on the number of effects

Last Answer : (B) Lowest in last effect

In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Description : In a shell and tube heat exchanger, square pitch compared to triangular pitch (A) Gives a higher shell side pressure drop (B) Gives a lower shell side pressure drop (C) Can pack more surface area into a shell of given diameter (D) None of these

Last Answer : (A) Gives a higher shell side pressure drop

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

The refrigeration effect in a dry evaporator compared to flooded evaporator in a similar plant is (a) same (b) more (c) less (d) more or less depending on ambient conditions

Description : The refrigeration effect in a dry evaporator compared to flooded evaporator in a similar plant is (a) same (b) more (c) less (d) more or less depending on ambient conditions

Last Answer : Ans: c

Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Description : Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Last Answer : (D) None of these

Fqra cold viscous feed, backward feed gives __________ than forward feed. (A) A higher capacity (B) A lower capacity (C) Lower economy (D) None of these

Description : Fqra cold viscous feed, backward feed gives __________ than forward feed. (A) A higher capacity (B) A lower capacity (C) Lower economy (D) None of these

Last Answer : (A) A higher capacity

Define capacity and economy of evaporator.

Description : Define capacity and economy of evaporator.

Last Answer : The capacity of an evaporator is defined as the number of kilogram of water evaporated per hour. The economy of an evaporator is defined as the number of kilogram of water evaporated per kilogram of steam fed to the evaporator.

The effect of changing the evaporator temperature on COP as compared to that of changing the condenser temperature (in vapour compression refrigeration system) is (A) Less pronounced (B) More pronounced (C) Equal (D) Data insufficient, can't be predicted

Description : The effect of changing the evaporator temperature on COP as compared to that of changing the condenser temperature (in vapour compression refrigeration system) is (A) Less pronounced (B) More pronounced (C) Equal (D) Data insufficient, can't be predicted

Last Answer : (B) More pronounced

Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Description : Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Last Answer : (B) Mechanical draft cooling tower

. In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Description : . In a backward feed multiple effect evaporator (A) Feed is introduced in the first effect (B) Feed flows from low pressure to high pressure (C) No pumps are required between successive effects (D) None of these

Last Answer : (B) Feed flows from low pressure to high pressure

For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Description : For evaporation of viscous solution in a multiple effect evaporator, the preferred feeding scheme is (A) Forward (B) Backward (C) Parallel (D) None of these

Last Answer : (B) Backward

What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower-temperature body to a higher-temperature body?  A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Description : What statement of the second law of thermodynamics states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lower- ... A. Kelvin-Planck statement  B. Clausius statement  C. Kelvin statement  D. Rankine statement

Last Answer : Clausius statement

In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Description : In an interphase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be (A) Liquid phase resistance-controlled (B) Gas phase resistance controlled (C) Impossible (D) Driven by a non-linear driving forc

Last Answer : (B) Gas phase resistance controlled