Description : What is the disadvantage of biuret method?
Last Answer : The sensitivity of the method is less and is un- suitable for estimation of proteins in milligram or microgram quantities.
Description : A protein reacts with biuret reagent which indicates 2 or more (A) Blood clotting (B) Peptide bond (C) Disulphide bonds (D) Hydrophobic bonds
Last Answer : Answer : B
Description : Biuret test is specific for (A) Two peptide linkage (B) Phenolic group (C) Imidazole ring (D) None of these
Last Answer : Answer : A
Description : Indole group of tryptophan responses positively to (A) Glyoxylic acid (B) Schiff’s reagent (C) Biuret test (D) Resorcinol test
Description : Group that reacts in the Biuret test: (A) Peptide (B) Amino group (C) Carboxylic group (D) Aldehyde group
Description : Proteins react with biuret reagent which is suggestive of 2 or more (A) Hydrogen bonds (B) Peptide bonds (C) Disulphide bonds (D) Hydrophobic bonds
Description : The useful reagent for detection of amino acids is (A) Molisch reagent (B) Dichlorophenol Indophenol (C) Ninhydrin (D) Biuret
Last Answer : Answer : C
Description : Biuret reaction is specific for (A) –CONH-linkages (B) –CSNH2 group (C) –(NH)NH2 group (D) All of these
Description : What is biuret?
Last Answer : The name is derived from the compound biuret, a condensation product of two urea molecules, which also gives a positive color test.
Description : What is the use of biuret reaction?
Last Answer : This reaction can be used for qualitative identifi- cation and quantitative estimation of proteins.
Description : Will amino acids give a positive biuret test?
Last Answer : No. This needs a minimum of two peptide bonds.
Description : What is biuret reaction?
Last Answer : Cupric ions in alkaline medium form a violet colour with peptide bond nitrogen.
Description : What samples gives a positive test with biuret test?
Last Answer : Biuret test is for peptide bonds.
Description : What does biuret solution specifically react with to produce a color change?
Last Answer : amino acids
Description : What are the Reaction of amino acid using ninhydrin and biuret reagent?
Last Answer : What is the answer ?
Description : Prilling of urea should be accomplished (in a sprayer) just above the melting point of urea with minimum of retention time, otherwise it will result in (A) Low bulk density product (B) Biuret formation (C) Non-spherical prills (D) Substantially wet non-flowing and sticky product
Last Answer : (B) Biuret formation
Description : __________ is the undesirable by-product produced in the manufacture of urea. (A) Ammonium carbonate (B) Biuret (C) Carbon dioxide (D) Ammonium carbamate
Last Answer : (B) Biuret
Description : Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total ... (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)
Last Answer : (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate
Description : Biuret formation in urea is kept at minimum (< 1 %), because it is (A) Corrosive in nature (B) Toxic and harmful to some crops (C) Helpful in decomposition of urea (D) Explosive in nature
Last Answer : (B) Toxic and harmful to some crops
Description : . Chemical formula of biuret is (A) NH2 .CO.NH2 (B) NH3 .COO.NH3 (C) NH2CONHCONH2 (D) NH4COONH2
Last Answer : (C) NH2CONHCONH2
Description : Dehydration of ammonium carbamate produces (A) Urea (B) Biuret (C) Ammonia water (D) None of these
Last Answer : (A) Urea
Description : In the manufacture of urea, the intermediate chemical formed is (A) Biuret (B) Ammonium carbamate (C) Ammonium carbonate (D) None of these
Last Answer : (B) Ammonium carbamat
Description : Lower temperature and large excess of ammonia in urea melt (A) Increases biuret formation (B) Decreases biuret formation (C) Is undesirable (D) Does not effect biuret formation
Last Answer : (B) Decreases biuret formation
Description : Yield of urea can be increased with excess ammonia and higher pressure & temperature, but because of __________ this is normally not done. (A) Increased biuret formation (B) High corrosion rate (C) Increased cost of equipment (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : With increases in pressure, the conversion of Ammonium carbamate into urea (A) Increases (B) Decreases (C) Remains unaltered (D) Can either increase or decrease depends on biuret content
Last Answer : (A) Increases
Description : A protein solution on warming with concentrated HNO3 may turn yellow. This test is called : (a) Xanthoproteic test (b) Ninhydrin test (c) Biuret test (d) Million's test
Last Answer : Xanthoproteic test
Description : Which of the following tests is not used for testing proteins? (a) Ninhydrin test (b) Biuret test (c) Xanthoproteic test (d) Tollens' test
Last Answer : Tollens' test
Description : What happens when urea is treated with hydrazine? (a) Biuret is formed (b) Semicarbazide is formed (c) Carbon dioxide and nitrogen is formed (d) Acetamide is formed
Last Answer : Semicarbazide is formed
Description : Describe the following points with respect to manufacturing of Urea. (i) Temperature (ii) Pressure (iii) Formation of Biuret
Last Answer : Manufacturing of Urea w.r.t following points 1. Temperature: Urea production rate increases as temperature increases up to 180oC and then fall sharply. 2. Pressure: Urea production rate increases as pressure ... before sending to prilling tower. 2NH2 .CO.NH2 = NH2.CO.NH.CO.NH2 + NH
Description : Mention any two products which are transported through a pipeline. State any one advantage of this method of transportation. -Geography
Last Answer : Petroleum/milk /water /gas /petroleum products, etc. Advantage —can be constructed even across water or difficult terrains and needs very little maintenance.
Description : What is the main advantage of transplantation method in rice cultivation? (a) This method ensures maximum utilization of land (b) It is helpful in achieving an economical use of water and a higher ... helps in early harvesting (d) The draining of water from the field before harvesting is made easy
Last Answer : Ans: (b)
Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.
Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output
Description : The advantage(s) of the method of D.C. motor speed control shown in the illustration is/are ______________. EL-0101 A. elimination of armature starting resistor losses B. elimination of speed instability with variable loads C. the ease of reversing motor direction D. all of the above
Last Answer : Answer: D
Description : Identify the advantage of using method of images. a) Easy approach b) Boundaries are replaced by charges c) Boundaries are replaced by images d) Calculation using Poisson and Laplace equation
Last Answer : a) Easy approach
Description : The primary advantage of automatic vending as a form of retailing is that : 1. it provides continuous service to customers 2. it eliminates the need for sales personnel 3. vending machines require little maintenance 4. it offers low cost, personal method of selling 5. none of these
Last Answer : it eliminates the need for sales personnel
Description : Advantage of Gauss-Seidel method is a) applicable for large power system network b) calculation time for each iteration is less c) number of iterations are less d) all of the above
Last Answer : b) calculation time for each iteration is less
Description : The primary advantage of automatic vending as a form of retailing is that: A)it provides continuous service to customers. B)it eliminates the need for sales personnel. C)vending machines require little maintenance. D)it offers a low cost, personal method of selling.
Last Answer : B)it eliminates the need for sales personnel.
Description : List any two direct methods of level measurement. Explain Hydrostatic method of level measurement. Give one advantage and one disadvantage of it.
Last Answer : ➢ Direct methods of level measurement Direct methods 1. Hook type 2. Sight glass type 3. Float type 4. Dip stick ➢ Hydrostatic method of level measurement. ➢ A liquid in ... - 1. Their calibration gets changed according to variations in product density. 2. Require compressed air.
Description : As compared to rental and leasing methods to acquire computer systems for a Management Information System (MIS), purchase method has following advantage : (A) It has high level of flexibility (B) It doesn’t require cash up-front (C) It is a business investment (D) Little risk of obsolescence
Last Answer : (C) It is a business investment
Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.
Last Answer : Methods for measurement of low resistance: 1. Ammeter voltmeter method 2. Kelvin's bridge method 3. Ohm meter method 4. Potentiometer method 5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible. 2. Connection errors.
Description : Write one advantage and one disadvantage each for spring control method and gravity control method.
Last Answer : Advantages of Spring Control Method: 1) The spring-controlled meters may be used in any position. 2) In some instruments, springs can be used as current leads. 3) As springs are light in weight ... only. 2) Scale is non-uniform. 3) Control weights add to the weight of instrument.
Description : List one advantage and one disadvantage of one wattmeter method.
Last Answer : Advantages: 1) Only one wattmeter is used. 2) Less number of connections. 3) Cost required is less. Disadvantages: 1) Used only for 3- Φ balanced load and not for ... be accessible for connecting the Pressure coil. 3) Delta connection must be opened to connect current coil.