During crystallisation, formation of crystal can occur in __________ solution only. (A) Saturated (B) Supersaturated (C) Under-saturated (D) All (A), (B) and (C)

During crystallisation, formation of crystal can occur in __________

solution only.

(A) Saturated

(B) Supersaturated

(C) Under-saturated

(D) All (A), (B) and (C)

by

1 Answer

Answer :

(B) Supersaturated

by

Related questions

The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Description : The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Last Answer : (C) Super-saturation

(2) stabilise the colloid and prevent crystallisation Explanation: Gelatine, being a colloid, has the property of preventing crystallization. In ice lollies and icecream this is demonstrated by the formation of a very fine crystal structure on freezing. This goes much further in that gelatine stabilized icecream does not become grainy or sandy due to the slow crystallisation of lactose with time.

Description : (2) stabilise the colloid and prevent crystallisation Explanation: Gelatine, being a colloid, has the property of preventing crystallization. In ice lollies and icecream this is demonstrated by the formation ... does not become grainy or sandy due to the slow crystallisation of lactose with time.

Last Answer : Glycol is added to aviation gasoline because it - (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

The maximum heat transfer co-efficient from steam heating will beattained when the steam is: (A) Supersaturated (B) Saturated (C) Wet (D) None of these

Description : The maximum heat transfer co-efficient from steam heating will beattained when the steam is: (A) Supersaturated (B) Saturated (C) Wet (D) None of these

Last Answer : (B) Saturated

Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : B) Superheated

What is supersaturated solution what is done to make a solution supersaturated?

Description : What is supersaturated solution what is done to make a solution supersaturated?

Last Answer : Need answer

Crystallisation of solids from a homogeneous solution is a/an __________ process. (A) Exothermic (B) Mildly endothermic (C) Highly endothermic (D) None of these

Description : Crystallisation of solids from a homogeneous solution is a/an __________ process. (A) Exothermic (B) Mildly endothermic (C) Highly endothermic (D) None of these

Last Answer : (A) Exothermic

Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The liquor left after the removal of crystals from a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Description : Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The ... a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Last Answer : (A) Swenson-Walker crystalliser is a batch crystalliser

Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Description : Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Last Answer : (C) Absorption

In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Description : In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Last Answer : (A) More

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

One of the steps during refining of cane sugar consists of addition ofhydrated lime to the sugar syrup followed by carbonation of the resultingsolution. The purpose of this step is to(A) Adjust the pH of the syrup(B) Remove the coloring matter from the syrup(C) Reduce the viscosity of the syrup(D) Improve the rate of crystallisation of sugar

Description : One of the steps during refining of cane sugar consists of addition ofhydrated lime to the sugar syrup followed by carbonation of the resulting solution. The purpose of this step is to (A) Adjust ... (C) Reduce the viscosity of the syrup (D) Improve the rate of crystallisation of sugar

Last Answer : (A) Adjust the pH of the syrup

The concept of chemical evolution is based on (a) interaction of water, air and clay under intense heat (b) effect of solar radiation on chemicals (c) possible origin of life by combination of chemicals under suitable environmental conditions (d) crystallisation of chemicals.

Description : The concept of chemical evolution is based on (a) interaction of water, air and clay under intense heat (b) effect of solar radiation on chemicals (c) possible origin of life by combination of chemicals under suitable environmental conditions (d) crystallisation of chemicals.

Last Answer : (c) possible origin of life by combination of chemicals under suitable environmental conditions

Agitator is provided in a crystalliser for(A) Avoiding deposition on cooler surfaces(B) Formation of nuclei(C) Crystal growth(D) All (A), (B) and (C)

Description : Agitator is provided in a crystalliser for (A) Avoiding deposition on cooler surfaces (B) Formation of nuclei (C) Crystal growth (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Description : Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Last Answer : (B) Sensible

A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Description : A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Last Answer : (A) Sub-cooled

Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding (A) Glycerol (B) Nitro cellulose (C) Camphor (D) None of these

Description : Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding (A) Glycerol (B) Nitro cellulose (C) Camphor (D) None of these

Last Answer : (C) Camphor

Unit operation involved in the prilling of urea is (A) Evaporation (B) Drying (C) Crystallisation (D) Both (B) and (C)

Description : Unit operation involved in the prilling of urea is (A) Evaporation (B) Drying (C) Crystallisation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Last Answer : (B) Crystallisation

Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Last Answer : (C) Evaporation

Concentration of hydrogen peroxide is done by(A) Crystallisation(B) Vacuum crystallisation(C) Atmospheric distillation(D) Dehydration

Description : Concentration of hydrogen peroxide is done by (A) Crystallisation (B) Vacuum crystallisation (C) Atmospheric distillation (D) Dehydration

Last Answer : (B) Vacuum crystallisation

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Description : The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Last Answer : (A) Avoid mechanical weakening of fibre

What are four interfering agents used to prevent crystal formation in candies?

Description : What are four interfering agents used to prevent crystal formation in candies?

Last Answer : Feel Free to Answer

1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Description : 1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Last Answer : (C) 0.2

Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Description : Leidenfrost point is a term concerned with the (A) Condensation of the saturated vapor on a cold surface (B) Concentration of a corrosive solution by evaporation (C) Heat transfer between two highly viscous liquids (D) Boiling of a liquid on a hot surface

Last Answer : (D) Boiling of a liquid on a hot surface

What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Description : What products do we get on electrolysis of saturated brine using steel cathode and graphite anode in an electrolytic cell? (A) Cl2 & Na (B) Cl2 & H2 (C) O2 & H2 (D) Cl2 , H2 & NaOH solution

Last Answer : (D) Cl2 , H2 & NaOH solution

Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Description : Pick up the correct statement from the following: (A) Bulking of sand is caused due to formation of a thin film of surface moisture (B) Fine sand bulks more than coarse sand (C) The volume of fully saturated sand, is equal to the volume of dry and loose sand (D) All the above

Last Answer : Answer: Option D

During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Description : During the carbonisation of coal (A) All tar is evolved at < 600°C (B) Evolution of H2 and formation of methane and aromatics occur at > 700°C (C) Hard semi-coke starts shrinking at 600°C (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

What is crystallisation? Where is it used? Why is this better than simple evaporation technique? -Science

Description : What is crystallisation? Where is it used? Why is this better than simple evaporation technique? -Science

Last Answer : crystallisation is a process that separates a pure solid in the form of its crystals from a solution. Crystallisation is better than evaporation because during Evaporation. Some solids decompose or some, ... charred on heating to dryness. ... In such cases, the crystallisation technique is applied.

Which of the following pair of isomers can not be separated by fractional crystallisation or fractional distillation:

Description : Which of the following pair of isomers can not be separated by fractional crystallisation or fractional distillation:

Last Answer : Which of the following pair of isomers can not be separated by fractional crystallisation or fractional ... )-lactic acid and (-) -lactic acid

Crystallisation of insulin occurs in the presence of (A) Chromium (B) Copper (C) Zinc (D) Calcium

Description : Crystallisation of insulin occurs in the presence of (A) Chromium (B) Copper (C) Zinc (D) Calcium

Last Answer : Answer : C

Isoelectric point of amino acids is used for (A) Crystallisation (B) Precipitation (C) Solubility (D) Reactivity

Description : Isoelectric point of amino acids is used for (A) Crystallisation (B) Precipitation (C) Solubility (D) Reactivity

Last Answer : Answer : B

Cooking oil can be converted into vegetable ghee by the process of 1. hydrogenation 2. distillation 3. crystallisation 4. reduction The correct processes are: (a) 1 and 4 (b) 2 and 4 (c) 1 and 3 (d) 3 and 4

Description : Cooking oil can be converted into vegetable ghee by the process of 1. hydrogenation 2. distillation 3. crystallisation 4. reduction The correct processes are: (a) 1 and 4 (b) 2 and 4 (c) 1 and 3 (d) 3 and 4

Last Answer : Ans:(a)

Common salt is obtained from sea water by the process of (a) sublimation (b) evaporation (c) crystallisation (d) filtration

Description : Common salt is obtained from sea water by the process of (a) sublimation (b) evaporation (c) crystallisation (d) filtration

Last Answer : Ans:(b)

Camphor can easily be purified by the process of (a) Sublimation (b) Distillation (c) Crystallisation (d) Sedimentation

Description : Camphor can easily be purified by the process of (a) Sublimation (b) Distillation (c) Crystallisation (d) Sedimentation

Last Answer : Ans:(a)

Which one of the following salts does not contain water of crystallisation? (a) Blue vitriol (b) Baking soda (c) Washing soda (d) Gypsum

Description : Which one of the following salts does not contain water of crystallisation? (a) Blue vitriol (b) Baking soda (c) Washing soda (d) Gypsum

Last Answer : (b) Baking soda

Which one of the following salts does not con-tain water of crystallisation? a) Blue vitriol b) Baking soda c) Washing soda d) Gypsum

Description : Which one of the following salts does not con-tain water of crystallisation? a) Blue vitriol b) Baking soda c) Washing soda d) Gypsum

Last Answer : b) Baking soda

Which one of the following salts does not contain water of crystallisation? a) Soda Blue vitriol b) Baking soda c) Washing d) Gypsum

Description : Which one of the following salts does not contain water of crystallisation? a) Soda Blue vitriol b) Baking soda c) Washing d) Gypsum

Last Answer : b) Baking soda

The method used for preparing tincture from the mucilaginous and gummy substances from vegetable or animal kingdom is Options: 1) Distillation 2) Sublimation 3) Maceration 4) Crystallisation

Description : The method used for preparing tincture from the mucilaginous and gummy substances from vegetable or animal kingdom is Options: 1) Distillation 2) Sublimation 3) Maceration 4) Crystallisation

Last Answer : Correct Answer: 3) Maceration

Gelatin is mostly used in making ice–creams in order to (1) prevent making a colloid (2) stabilise the colloid and prevent crystallisation (3) stabilise mixture (4) enrich the aroma

Description : Gelatin is mostly used in making ice–creams in order to (1) prevent making a colloid (2) stabilise the colloid and prevent crystallisation (3) stabilise mixture (4) enrich the aroma

Last Answer :  stabilise the colloid and prevent crystallisation

Impure camphor is purified by (1) sublimation (2) fractional crystallisation (3) fractional distillation (4) steam distillation

Description : Impure camphor is purified by (1) sublimation (2) fractional crystallisation (3) fractional distillation (4) steam distillation

Last Answer : sublimation

__________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel

Last Answer : (B) Niobium

Most of the common metals have __________ crystal structure. (A) Cubic (B) Hexagonal (C) Orthorhombic (D) None of these

Description : Most of the common metals have __________ crystal structure. (A) Cubic (B) Hexagonal (C) Orthorhombic (D) None of these

Last Answer : (A) Cubic

Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Description : Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Last Answer : (D) Simple cubic

Closeness of packing is maximum in case of __________ crystal lattice. (A) Face centred (B) Simple cubic (C) Body centred (D) None of these

Description : Closeness of packing is maximum in case of __________ crystal lattice. (A) Face centred (B) Simple cubic (C) Body centred (D) None of these

Last Answer : (A) Face centred

Mild steel has __________ crystal lattice structure. (A) Face centred cubic (fcc) (B) Body centred cubic (bcc) (C) Orthorhombic (D) Cubic

Description : Mild steel has __________ crystal lattice structure. (A) Face centred cubic (fcc) (B) Body centred cubic (bcc) (C) Orthorhombic (D) Cubic

Last Answer : (B) Body centred cubic (bcc)

What happens when? a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. b) A pinch of mercuric oxide is kept in a test tube. c)A small crystal of silver nitrate is dissolved in distilled water and a drop of ammonium hydroxide & a pinch of glucose powder are added.

Description : What happens when? a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. b) A pinch of mercuric oxide is kept in a test tube. c)A small crystal of silver nitrate is dissolved in distilled water and a drop of ammonium hydroxide & a pinch of glucose powder are added.

Last Answer : a) A cleaned iron plate or iron nail is kept in 10g of copper sulphate solution. After a few hours a coating of copper is seen on iron nail/plate. It is based on displacement reaction. ... on the inner walls of the test tube. Aldehyde group in glucose reduced silver nitrate to metallic silver.

__________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Description : __________ are produced by reacting polybasic acid (e.g. Phthalic anhydride) with polyhydric alcohol (e.g., glycerol). (A) Unsaturated polyester (B) Alkyd resins (C) Saturated polyester (D) Amino resins

Last Answer : (B) Alkyd resins

__________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Description : __________ is the temperature at which a gas-vapor mixture becomes saturated, when cooled at constant total pressure out of contact with a liquid. (A) Dew point (B) Bubble point (C) Dry bulb temperature (D) Wet bulb temperature

Last Answer : (A) Dew point