The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

The driving potential for the crystal growth during crystallisation is the
__________ of the solution.
(A) Concentration
(B) Viscosity
(C) Super-saturation
(D) Density
by

1 Answer

Answer :

(C) Super-saturation
by

Related questions

Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The liquor left after the removal of crystals from a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Description : Pick out the wrong statement. (A) Swenson-Walker crystalliser is a batch crystalliser (B) Super saturation of the solution is the driving potential for a crystal growth (C) The ... a solution is called mother liquor (D) The first stage of crystal formation is called nucleation

Last Answer : (A) Swenson-Walker crystalliser is a batch crystalliser

During crystallisation, formation of crystal can occur in __________ solution only. (A) Saturated (B) Supersaturated (C) Under-saturated (D) All (A), (B) and (C)

Description : During crystallisation, formation of crystal can occur in __________ solution only. (A) Saturated (B) Supersaturated (C) Under-saturated (D) All (A), (B) and (C)

Last Answer : (B) Supersaturated

The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear crystal growth rate does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

Description : The McCabe ΔL law states that the (A) Molar heats of vaporisation of components are nearly equal (B) Linear crystal growth rate depends on the degree of super-saturation (C) Linear ... does not depend on the crystal size (D) Linear crystal growth rate depends on the crystal size

Last Answer : (C) Linear crystal growth rate does not depend on the crystal size

Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Description : Crystal size in a continuous crystalliser depends upon the (A) Rate of heat transfer (B) Degree of turbulence (C) Degree of super-saturation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Description : In case of a super-cooled solution, which is on the verge of crystallisation, the free energy of the solution as compared to that of the solid is (A) More (B) Less (C) Same (D) More or less; depends on the nature of solution

Last Answer : (A) More

One of the steps during refining of cane sugar consists of addition ofhydrated lime to the sugar syrup followed by carbonation of the resultingsolution. The purpose of this step is to(A) Adjust the pH of the syrup(B) Remove the coloring matter from the syrup(C) Reduce the viscosity of the syrup(D) Improve the rate of crystallisation of sugar

Description : One of the steps during refining of cane sugar consists of addition ofhydrated lime to the sugar syrup followed by carbonation of the resulting solution. The purpose of this step is to (A) Adjust ... (C) Reduce the viscosity of the syrup (D) Improve the rate of crystallisation of sugar

Last Answer : (A) Adjust the pH of the syrup

(2) stabilise the colloid and prevent crystallisation Explanation: Gelatine, being a colloid, has the property of preventing crystallization. In ice lollies and icecream this is demonstrated by the formation of a very fine crystal structure on freezing. This goes much further in that gelatine stabilized icecream does not become grainy or sandy due to the slow crystallisation of lactose with time.

Description : (2) stabilise the colloid and prevent crystallisation Explanation: Gelatine, being a colloid, has the property of preventing crystallization. In ice lollies and icecream this is demonstrated by the formation ... does not become grainy or sandy due to the slow crystallisation of lactose with time.

Last Answer : Glycol is added to aviation gasoline because it - (1) reduces evaporation of petrol (2) increases efficiency of petrol (3) prevents freezing of petrol (4) reduces consumption of petrol

Crystallisation of solids from a homogeneous solution is a/an __________ process. (A) Exothermic (B) Mildly endothermic (C) Highly endothermic (D) None of these

Description : Crystallisation of solids from a homogeneous solution is a/an __________ process. (A) Exothermic (B) Mildly endothermic (C) Highly endothermic (D) None of these

Last Answer : (A) Exothermic

Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Description : Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a '& 'b

Concentration of hydrogen peroxide is done by(A) Crystallisation(B) Vacuum crystallisation(C) Atmospheric distillation(D) Dehydration

Description : Concentration of hydrogen peroxide is done by (A) Crystallisation (B) Vacuum crystallisation (C) Atmospheric distillation (D) Dehydration

Last Answer : (B) Vacuum crystallisation

Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Description : Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Last Answer : (A) Boiling point (at the same pressure)

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Description : A negative heat of solution indicates that: w) an endothermic dissolving process occurs x) solute solubility increases with rising solution temperature y) solute solubility decreases with rising solution temperature z) super-saturation conditions exist

Last Answer : ANSWER: Y -- SOLUTE SOLUBILITY DECREASES WITH RISING SOLUTION TEMPERATURE

Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Description : Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Last Answer : (C) Absorption

The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Description : The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Last Answer : (C) Kinematic viscosity

Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

__________ is an intensive growth strategy of increasing sales in current markets with current products. A)Market development B)Market penetration C)Sales penetration D)Product development E)Market saturation

Description : __________ is an intensive growth strategy of increasing sales in current markets with current products. A)Market development B)Market penetration C)Sales penetration D)Product development E)Market saturation

Last Answer : B)Market penetration

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Description : 1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Last Answer : Option A

__________ temperature remains constant during adiabatic saturation process of unsaturated air. (A) Dew point (B) Dry bulb (C) Wet bulb (D) None of these

Description : __________ temperature remains constant during adiabatic saturation process of unsaturated air. (A) Dew point (B) Dry bulb (C) Wet bulb (D) None of these

Last Answer : (C) Wet bulb

SO2 is bubbled through hot sugar cane juice to (A) Act as an acidifying agent (B) Increase its concentration (C) Increase the amount of molasses (D) Increase the crystal size

Description : SO2 is bubbled through hot sugar cane juice to (A) Act as an acidifying agent (B) Increase its concentration (C) Increase the amount of molasses (D) Increase the crystal size

Last Answer : (A) Act as an acidifying agent

Write the concentration of `CO_(2)` at which `C_(3) and C_(4)` plants shows saturation respectively.

Description : Write the concentration of `CO_(2)` at which `C_(3) and C_(4)` plants shows saturation respectively.

Last Answer : Write the concentration of `CO_(2)` at which `C_(3) and C_(4)` plants shows saturation respectively.

Without saturation of transport proteins and under same concentration gradient how can the speed of simple diffusion be compared to the speed of facilitated diffusion ?

Description : Without saturation of transport proteins and under same concentration gradient how can the speed of simple diffusion be compared to the speed of facilitated diffusion ?

Last Answer : The action of facilitator proteins in facilitated diffusion makes this type of diffusion faster than simple diffusion under equal concentration gradients of the moved substance.

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum

The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Description : The magnitude of saturation photo electric current depends upon (a) Frequency (b) Intensity (c) Work function (d) Stopping potential

Last Answer : Ans:(b)

During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Description : During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Last Answer : (A) Density of the liquid

Agitator is provided in a crystalliser for(A) Avoiding deposition on cooler surfaces(B) Formation of nuclei(C) Crystal growth(D) All (A), (B) and (C)

Description : Agitator is provided in a crystalliser for (A) Avoiding deposition on cooler surfaces (B) Formation of nuclei (C) Crystal growth (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding (A) Glycerol (B) Nitro cellulose (C) Camphor (D) None of these

Description : Crystallisation of polymers is an undesirable property. Crystallisation of celluloid is prevented by adding (A) Glycerol (B) Nitro cellulose (C) Camphor (D) None of these

Last Answer : (C) Camphor

Unit operation involved in the prilling of urea is (A) Evaporation (B) Drying (C) Crystallisation (D) Both (B) and (C)

Description : Unit operation involved in the prilling of urea is (A) Evaporation (B) Drying (C) Crystallisation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Last Answer : (B) Crystallisation

Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Last Answer : (C) Evaporation

Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl(D) Both (B) and (C)

Description : Solvay process as compared to dual process (i.e. modified Solvay process). (A) Can use low grade brine (B) Has less corrosion problems (C) Involves higher investment in NH3 recovery units than that for crystallisation units for NH4Cl (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Description : The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Last Answer : (A) Avoid mechanical weakening of fibre

A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Description : A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Last Answer : (D) 84 %

The expression [Gs/(1 + Gs )] is used for (A) Dry density (B) Bulk density (C) Degree of saturation (D) Optimum water content

Description : The expression [Gs/(1 + Gs )] is used for (A) Dry density (B) Bulk density (C) Degree of saturation (D) Optimum water content

Last Answer : (A) Dry density

The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Description : The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Last Answer : (B) = (G + eSr ) /(1 + e)

Glass is - (1) Super cooled liquid (2) Crystalline solid (3) Liquid crystal (4) None of these

Description : Glass is - (1) Super cooled liquid (2) Crystalline solid (3) Liquid crystal (4) None of these

Last Answer : (1) Super cooled liquid Explanation: Glass is sometimes called a Super cooled liquid because it does not form a crystalline structure, but instead forms an amorphous solid that allows molecules in the material to continue to move.

In “Product Life Cycle” a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage

Description : In “Product Life Cycle” a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage

Last Answer : c.Growth stage

n which stage or phase of Product Life Cycle, Sales Volume is at Peak Point a) Growth b) Saturation c) Maturity d) Decline

Description : n which stage or phase of Product Life Cycle, Sales Volume is at Peak Point a) Growth b) Saturation c) Maturity d) Decline

Last Answer : b) Saturation

Three main strategies for intensive growth are market penetration, product development, and A)product improvement. B)market saturation. C)sales penetration. D)market growth. E)market development.

Description : Three main strategies for intensive growth are market penetration, product development, and A)product improvement. B)market saturation. C)sales penetration. D)market growth. E)market development.

Last Answer : E)market development

Ore concentration by froth floatation utilises the __________ of oreparticles. (A) Density difference (B) Wetting characteristics (C) Terminal velocities (D) None of these

Description : Ore concentration by froth floatation utilises the __________ of oreparticles. (A) Density difference (B) Wetting characteristics (C) Terminal velocities (D) None of these

Last Answer : (B) Wetting characteristics

Percentage saturation is __________ the relative saturation. (A) Always smaller than (B) Always greater than (C) Not related to (D) None of these

Description : Percentage saturation is __________ the relative saturation. (A) Always smaller than (B) Always greater than (C) Not related to (D) None of these

Last Answer : (A) Always smaller than

When the psychometric ratio is __________ then the adiabatic saturation temperature and wet bulb temperature becomes equal. (A) 1 (B) < 1 (C) > 1 (D) ∞

Description : When the psychometric ratio is __________ then the adiabatic saturation temperature and wet bulb temperature becomes equal. (A) 1 (B) < 1 (C) > 1 (D) ∞

Last Answer : (A) 1

In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Description : In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Last Answer : (A) Lower than

The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Description : The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Wet bulb and dry bulb temperatures becomes identical at __________ percent saturation curve. (A) 100 (B) 50 (C) 78 (D) None of these

Description : Wet bulb and dry bulb temperatures becomes identical at __________ percent saturation curve. (A) 100 (B) 50 (C) 78 (D) None of these

Last Answer : (A) 100

Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Description : Steady state temperature reached by a small amount of liquid evaporating into a large amount of unsaturated vapour-gas mixture is called the __________ temperature. (A) Dry-bulb (B) Wet-bulb (C) Dew point (D) Adiabatic saturation

Last Answer : (B) Wet-bulb