If the overall efficiency and Murphree plate efficiency are equal, then both the equilibrium and operating lines are: (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B)

If the overall efficiency and Murphree plate efficiency are equal, then
both the equilibrium and operating lines are:
(A) Straight
(B) Parallel
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) & (B)
by

Related questions

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

When the liquid over a plate is of uniform concentration, then (A) Murphree efficiency > point efficiency (B) Murphree efficiency < point efficiency (C) Murphree efficiency = point efficiency (D) Murphree efficiency ≠ point efficiency

Description : When the liquid over a plate is of uniform concentration, then (A) Murphree efficiency > point efficiency (B) Murphree efficiency < point efficiency (C) Murphree efficiency = point efficiency (D) Murphree efficiency ≠ point efficiency

Last Answer : (C) Murphree efficiency = point efficiency

The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are (A) Parallel (B) Straight (C) Both parallel and straight (D) Neither parallel nor straight

Description : The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are (A) Parallel (B) Straight (C) Both parallel and straight (D) Neither parallel nor straight

Last Answer : (C) Both parallel and straight

Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency

Description : Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency

Last Answer : (A) The ratio of number of ideal plates to actual plates

Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is equal to HTU, when both the operating line & the equilibrium lines are parallel (C) Hatta number is important in case of gas absorption with chemical reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Description : Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is ... reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Last Answer : (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent(A) 100(B) > 100(C) < 100(D) None of these

Description : If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent (A) 100 (B) > 100 (C) < 100 (D) None of these

Last Answer : (B) > 100

Flooding in a distillation column is detected by a sharp (A) Increase in Murphree plate efficiency (B) Decrease in pressure drop (C) Decrease in liquid hold up in the column (D) Increase in pressure drop

Description : Flooding in a distillation column is detected by a sharp (A) Increase in Murphree plate efficiency (B) Decrease in pressure drop (C) Decrease in liquid hold up in the column (D) Increase in pressure drop

Last Answer : (D) Increase in pressure drop

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

HETP is numerically equal to HTU, only when the operating line (A) Lies below the equilibrium line (B) Lies above the equilibrium line (C) And equilibrium lines are parallel (D) Is far from the equilibrium line

Description : HETP is numerically equal to HTU, only when the operating line (A) Lies below the equilibrium line (B) Lies above the equilibrium line (C) And equilibrium lines are parallel (D) Is far from the equilibrium line

Last Answer : (C) And equilibrium lines are parallel

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

In case of absorption, both the operating and equilibrium lines will be straight for (A) Isothermal operation (B) Dilute solutions (C) Dilute solutions and isothermal operation (D) None of these

Description : In case of absorption, both the operating and equilibrium lines will be straight for (A) Isothermal operation (B) Dilute solutions (C) Dilute solutions and isothermal operation (D) None of these

Last Answer : (C) Dilute solutions and isothermal operation

In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In McCabe-Thiele method, at infinite reflux ratio (A) The overhead product is minimum (B) Both the operating lines coincide with diagonal (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) The overhead product is minimum

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Absorption factor method is used to calculate the number of ideal stages, when (A) Operating line lies above the equilibrium line (B) Operating line lies below the equilibrium line (C) Both operating and equilibrium lines are parallel (D) Pressure drop in the column is very high

Description : Absorption factor method is used to calculate the number of ideal stages, when (A) Operating line lies above the equilibrium line (B) Operating line lies below the equilibrium line (C) Both operating and equilibrium lines are parallel (D) Pressure drop in the column is very high

Last Answer : (C) Both operating and equilibrium lines are parallel

With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the equilibrium __________ rises in case of endothermic reaction. (A) Constant (B) Conversion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Conversion

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

If a rigid body is in equilibrium under the action of three forces, then (A) These forces are equal (B) The lines of action of these forces meet in a point (C) The lines of action of these forces are parallel (D) Both (B) and (C) above

Description : If a rigid body is in equilibrium under the action of three forces, then  (A) These forces are equal  (B) The lines of action of these forces meet in a point  (C) The lines of action of these forces are parallel  (D) Both (B) and (C) above

Last Answer : (D) Both (B) and (C) above

The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Description : The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Last Answer : (C) Absorption factor

The expression, y(1 - x)/x(1 - y) is for (A) Absorption factor (B) Relative volatility (C) Selectivity (D) Murphree efficiency

Description : The expression, y(1 - x)/x(1 - y) is for (A) Absorption factor (B) Relative volatility (C) Selectivity (D) Murphree efficiency

Last Answer : (B) Relative volatility

For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Description : For the reversible exothermic reaction, N2 + 3H2 ⇌ 2NH3, increase of pressure would (A) Shift the equilibrium towards right (B) Give higher yield of NH3 (C) Both (B) and (C) (D) Neither (A) nor (B)

Last Answer : (C) Both (B) and (C)

For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multi-component multiple phases to be in equilibrium at the same pressure and temperature, the __________ of each component must be same in all phases. (A) Chemical potential (B) Fugacity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

________ of depreciation calculation accounts for the interest on investment. (A) Straight line method (B) Declining balance (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : ________ of depreciation calculation accounts for the interest on investment. (A) Straight line method (B) Declining balance (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : D) Neither (A) nor (B)

H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Description : H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S ... by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Last Answer : (A) 2.0

For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Description : For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Last Answer : (C) Dilute solution and isothermal operation

Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Heat load in a cooling tower (A) Means the amount of heat thrown away (KCal/hr.) by the cooling tower (B) Is equal to the number of kg, of water circulated times the cooling range (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The standard state of a gas (at a given temperature) is the state in which fugacity is equal to (A) Unity (B) Activity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The standard state of a gas (at a given temperature) is the state in which fugacity is equal to (A) Unity (B) Activity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Paresh purchased an I-pod for Rs. 7500 and sold it at the gain of 24%. From that amount he purchased another I-pod and sold it at the loss of 20%. What is his overall gain/loss? (a) Loss of Rs. 100 (b) Gain of Rs. 60 (c) Loss of Rs. 60 (d) Neither gain nor loss (e) Gain of Rs. 100

Description : Paresh purchased an I-pod for Rs. 7500 and sold it at the gain of 24%. From that amount he purchased another I-pod and sold it at the loss of 20%. What is his overall gain/loss? (a) Loss of Rs. 100 (b) Gain of Rs. 60 (c) Loss of Rs. 60 (d) Neither gain nor loss (e) Gain of Rs. 100

Last Answer : (c) Loss of Rs. 60

A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Description : A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Last Answer : e. (B) and (C) above

Thermal efficiency of a Carnot engine can approach 100%, only when the temperature of the (A) Cold reservoir approaches zero (B) Hot reservoir approaches infinity (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Thermal efficiency of a Carnot engine can approach 100%, only when the temperature of the (A) Cold reservoir approaches zero (B) Hot reservoir approaches infinity (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : C) Either (A) or (B)

If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

Threshold energy in a reaction is equal to the (A) Activation energy (B) Normal energy of reactants (C) Sum of (A) & (B) (D) Neither (A) nor (B)

Description : Threshold energy in a reaction is equal to the (A) Activation energy (B) Normal energy of reactants (C) Sum of (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Sum of (A) & (B)

2m combine is operating at 4 kmph with an overall efficiency of 75%. The area covered by in(ha\h) will be: a. 0.4 b. 0.6 c. 0.8 d. 1.0

Description : 2m combine is operating at 4 kmph with an overall efficiency of 75%. The area covered by in(ha\h) will be: a. 0.4 b. 0.6 c. 0.8 d. 1.0

Last Answer : b. 0.6

As I went across the bridge, I met a man with a load of wood which was neither straight nor crooked. What kind of wood was it? -Riddles

Description : As I went across the bridge, I met a man with a load of wood which was neither straight nor crooked. What kind of wood was it? -Riddles

Last Answer : Sawdust.

The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b

For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Description : For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Last Answer : (C) Can lie above or below the equilibrium curve

In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Description : In McCabe-Thiele method of theoretical plate calculation for a distillation column, the operating lines of stripping and rectifying sections coincide with the diagonal at __________ reflux. (A) Total (B) Minimum (C) Operating (D) Maximum permissible

Last Answer : (A) Total

two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Last Answer : (B) Each force must be zero

The efficiency of a plate column will be maximum, when the flow is ideal __________ the plate. (A) Across (B) Above (C) Both (A) & (B)

Description : The efficiency of a plate column will be maximum, when the flow is ideal __________ the plate. (A) Across (B) Above (C) Both (A) & (B)

Last Answer : (C) Both (A) & (B)

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Description : Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Description : In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Last Answer : A) Mechanical

The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) Wet bulb temperature=dew point temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Description : The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) ... temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Last Answer : Option D

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum(C) Both ‘a’ & ‘b’(D) Neither ‘a’ nor ‘b

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b