Steam distillation is used to (A) Reduce the number of plates (B) Avoid thermal decomposition of a component (C) Increase the efficiency of separation (D) Increase the total pressure of distillation

Steam distillation is used to

(A) Reduce the number of plates

(B) Avoid thermal decomposition of a component

(C) Increase the efficiency of separation

(D) Increase the total pressure of distillation

by

1 Answer

Answer :

(B) Avoid thermal decomposition of a component

by

Related questions

. For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Description : . For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Last Answer : (A) Increase

Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a suitable membrane is called dialysis (C) Freeze drying is used for the drying of fish (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Description : Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a ... is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Last Answer : (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

The minimum number of theoretical plates is required for achieving a given separation in distillation column with (A) No reflux (B) Total reflux (C) Zero reflux ratio (D) Minimum reflux ratio

Description : The minimum number of theoretical plates is required for achieving a given separation in distillation column with (A) No reflux (B) Total reflux (C) Zero reflux ratio (D) Minimum reflux ratio

Last Answer : (B) Total reflux

High pressure at the bottom of a distillation tower handling heat sensitive materials results in (A) Thermal decomposition of bottoms (B) Increased relative volatility (C) Erosion of the tower (D) Very efficient operation

Description : High pressure at the bottom of a distillation tower handling heat sensitive materials results in (A) Thermal decomposition of bottoms (B) Increased relative volatility (C) Erosion of the tower (D) Very efficient operation

Last Answer : (A) Thermal decomposition of bottoms

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency

Description : Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency

Last Answer : (A) The ratio of number of ideal plates to actual plates

Can the efficiency of a plate in the distillation tower be greater than 100%? (A) Yes (B) Normally not; but is possible if infinite number of plates are put(C) Never(D) Yes; if the reflux ratio is maximum

Description : Can the efficiency of a plate in the distillation tower be greater than 100%? (A) Yes (B) Normally not; but is possible if infinite number of plates are put (C) Never (D) Yes; if the reflux ratio is maximum

Last Answer : (C) Never

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Function of air vessel provided in a reciprocating pump is to (A) Reduce discharge fluctuation (B) Reduce the danger of cavitation (C) Avoid the necessity of priming (D) Increase the pump efficiency

Description : Function of air vessel provided in a reciprocating pump is to (A) Reduce discharge fluctuation (B) Reduce the danger of cavitation (C) Avoid the necessity of priming (D) Increase the pump efficiency

Last Answer : (A) Reduce discharge fluctuation

Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Description : Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Last Answer : (B) Adsorption

steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Description : steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Last Answer : (C) Product must be immiscible with water

mmonium nitrate is (A) Having about 40% N2 (B) Not hygroscopic (C) Not prone to explosive thermal decomposition (D) Mixed with limestone powder to reduce its explosive nature before using it as a fertilizer

Description : mmonium nitrate is (A) Having about 40% N2 (B) Not hygroscopic (C) Not prone to explosive thermal decomposition (D) Mixed with limestone powder to reduce its explosive nature before using it as a fertilizer

Last Answer : (D) Mixed with limestone powder to reduce its explosive nature before using it as a fertilizer

Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Description : Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Last Answer : (B) Number of plates

Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Description : Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Description : At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Last Answer : (B) Total

In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because(A) Temperature is less(B) Total pressure is less(C) Mixing of steam with the material being vaporised is not so intimate asto result in equilibrium condition(D) Saturated steam is used for steam distillation

Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation

Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition

The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Flooding in a distillation column is detected by a sharp (A) Increase in Murphree plate efficiency (B) Decrease in pressure drop (C) Decrease in liquid hold up in the column (D) Increase in pressure drop

Description : Flooding in a distillation column is detected by a sharp (A) Increase in Murphree plate efficiency (B) Decrease in pressure drop (C) Decrease in liquid hold up in the column (D) Increase in pressure drop

Last Answer : (D) Increase in pressure drop

Priming of a centrifugal pump is done to (A) Increase the mass flow rate of fluid (B) Develop effective pressure rise by the pump (C) Avoid chances of separation inside the impeller (D) None of these

Description : Priming of a centrifugal pump is done to (A) Increase the mass flow rate of fluid (B) Develop effective pressure rise by the pump (C) Avoid chances of separation inside the impeller (D) None of these

Last Answer : (C) Avoid chances of separation inside the impeller

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are being withdrawn and feed to the column is stopped). At the new steady state, (A) Composition of vapors and that of liquid do not vary throughout the column (B) Reboiler load and condenser load are minimum (C) The top and bottom compositions are unchanged with and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Description : A distillation column with N plates is being operated under normal conditions. At some point of time, the operation is shifted to total reflux condition (i.e., no product and residue are ... and without total reflux (D) The top and bottom compositions correspond to the maximum enrichment available

Last Answer : (D) The top and bottom compositions correspond to the maximum enrichment available

Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is(A) Not possible in the second case unless vacuum is applied(B) Not possible in the second case unless high pressure is applied(C) More readily done in the second case compared to first one(D) None of these

Description : Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is (A) Not possible in the second ... (C) More readily done in the second case compared to first one (D) None of these

Last Answer : (C) More readily done in the second case compared to first one

To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number and the height of the theoretical plates on the column. D. Decrease both the number and the height of the theoretical plates on the column

Description : To improve a chromatographic separation, you must A. Increase the number of theoretical plates on the column. B. Increase the height of the theoretical plates on the column. C. Increase both the number ... the column. D. Decrease both the number and the height of the theoretical plates on the column

Last Answer : Increase the number of theoretical plates on the column

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

Which of the following has the least thermal efficiency? (A) Steam engine (B) Carnot engine (C) Diesel engine (D) Otto engine

Description : Which of the following has the least thermal efficiency? (A) Steam engine (B) Carnot engine (C) Diesel engine (D) Otto engine

Last Answer : A) Steam engine

The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Description : The amount of water evaporated in kg per kg of fuel burnt in a boiler is called the __________ of a boiler. (A) Evaporative capacity (B) Evaporation efficiency (C) Thermal efficiency (D) Steam load

Last Answer : (A) Evaporative capacity

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

Septic tanks are used for the __________ of the deposited solids. (A) Separation (B) Anaerobic decomposition (C) Aerobic decomposition (D) None of these

Description : Septic tanks are used for the __________ of the deposited solids. (A) Separation (B) Anaerobic decomposition (C) Aerobic decomposition (D) None of these

Last Answer : (B) Anaerobic decomposition

Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Description : Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Last Answer : (C) Minimum number of theoretical plates

At what value of reflux ratio, number of theoretical plates in a distillation column is minimum? (A) 0 (B) 1 (C) ∞ (D) < 1

Description : At what value of reflux ratio, number of theoretical plates in a distillation column is minimum? (A) 0 (B) 1 (C) ∞ (D) < 1

Last Answer : (C) ∞

For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Description : For a distillation column operating at minimum reflux, the (A) Concentration of liquid and vapour leaving a plate will be same (B) Reflux ratio will be maximum (C) Number of plates required will be maximum

Last Answer : (C) Number of plates required will be maximum

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Last Answer : (D) Steam

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Description : For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Last Answer : (D) An azeotrope may be formed during distillation

As the reflux ratio decreases, the (A) Separation becomes more efficient (B) Number of plates increases (C) Column diameter increases (D) None of these

Description : As the reflux ratio decreases, the (A) Separation becomes more efficient (B) Number of plates increases (C) Column diameter increases (D) None of these

Last Answer : (B) Number of plates increases

At minimum reflux ratio for a given separation (A) Number of plates is zero (B) Number of plates is infinity (C) Minimum number of the theoretical plates is required (D) Separation is most efficient

Description : At minimum reflux ratio for a given separation (A) Number of plates is zero (B) Number of plates is infinity (C) Minimum number of the theoretical plates is required (D) Separation is most efficient

Last Answer : (B) Number of plates is infinity

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Description : The efficiency of a thermal power plant improves with (A) increased quantity of coal burnt (B) larger quantity of water used (C) lower load in the plant (D) use of high steam pressures.

Last Answer : Ans: D

Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor

Description : Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor

Last Answer : Ans : d

On what factors efficiency (thermal) of the steam plant depends?

Description : On what factors efficiency (thermal) of the steam plant depends?

Last Answer : Efficiency of the thermal plant depends on three factors, they are pressure of steam entering the turbine temperature of the steam entering the turbine pressure in the condenser Thermal efficiency ... as low as possible. Thermal efficiency also increases by reheating the steam between turbine stages

Why the Thermal efficiency of the steam power plant is quite low?

Description : Why the Thermal efficiency of the steam power plant is quite low?

Last Answer : In Steam power station, more than 50% of the total heat of combustion is lost as heat rejected to the condenser and the loss is unavoidable as the heat energy cannot be converted in to mechanical ... lowest temperature. This is the reason that the thermal efficiency of the power plant is quite low.

What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Description : What is the overall efficiency of the Thermal Power Plant or Steam Power Plant?

Last Answer : Overall efficiency of the system is defined as the ratio of heat equivalent of electrical output to the heat of combustion. Generally Overall efficiency of the steam plant will always be ... by multiplying the thermal efficiency of the plant with efficiency of the generator (electrical efficiency)