Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Rose oil is extracted from rose leaves using __________ distillation.

(A) High pressure

(B) Low pressure

(C) Extractive

(D) Steam

by

1 Answer

Answer :

(D) Steam

by

Related questions

Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Last Answer : (D) Simple

Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Description : Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Last Answer : (B) Azeotropic

Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Last Answer : (D) Leaching

Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Last Answer : (B) Leaching

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Last Answer : (C) Extractive

Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Description : Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Last Answer : (A) Changes the relative volatility of the original components

In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Last Answer : (A) Added to alter the relative volatility of the mixture

ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Last Answer : (B) Crystallisation

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Description : Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Last Answer : (B) Evaporation

Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Description : Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Last Answer : (A) Evaporation and burning the concentrate followed by causticisation of products

Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Last Answer : (A) Evaporation followed by vacuum distillation

Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Last Answer : (A) Extraction with amyl or butyl acetate

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Description : For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Last Answer : (D) An azeotrope may be formed during distillation

Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12

Last Answer : (B) 3

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

The elements extracted through the process of distillation?

Description : The elements extracted through the process of distillation?

Last Answer : Zinc and Mercury

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

Rayleigh's equation applies to __________ distillation. (A) Continuous (B) Steam (C) Differential (D) Flash

Description : Rayleigh's equation applies to __________ distillation. (A) Continuous (B) Steam (C) Differential (D) Flash

Last Answer : (C) Differential

Solvent extracted oil (A) Has low free fatty acid content (B) Is odourless (C) Has more of unsaturates (D) None of these

Description : Solvent extracted oil (A) Has low free fatty acid content (B) Is odourless (C) Has more of unsaturates (D) None of these

Last Answer : (D) None of these

In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because(A) Temperature is less(B) Total pressure is less(C) Mixing of steam with the material being vaporised is not so intimate asto result in equilibrium condition(D) Saturated steam is used for steam distillation

Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation

Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition

The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Steam distillation is used to (A) Reduce the number of plates (B) Avoid thermal decomposition of a component (C) Increase the efficiency of separation (D) Increase the total pressure of distillation

Description : Steam distillation is used to (A) Reduce the number of plates (B) Avoid thermal decomposition of a component (C) Increase the efficiency of separation (D) Increase the total pressure of distillation

Last Answer : (B) Avoid thermal decomposition of a component

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26

Last Answer : (B) 10

Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Description : Vacuum maintained in the vacuum distillation column in oil refinery is in the range of about __________ mm Hg absolute. (A) 1 to 5 (B) 30 to 80

Last Answer : (B) 30 to 80

A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35

Last Answer : (A) 8

Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270

Last Answer : (A) 80-170

The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold up (C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Description : The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold ... C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Last Answer : (C) Low pressure drop and low hold up

Molecular distillation is (A) High temperature distillation (B) For heat-sensitive materials (C) Very low pressure distillation (D) Both (B) and (C)

Description : Molecular distillation is (A) High temperature distillation (B) For heat-sensitive materials (C) Very low pressure distillation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum

Description : Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum

Last Answer : (A) Reduced crude

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Description : A liquid with high boiling point decomposes on simple distillation but it can be steam distilled for its purification .Explain how is it possible?

Last Answer : In steam distillation boiling occurs when vapour pressure of organic compound & steam becomes equal to atmospheric pressure. As vapour pressure of water is higher than the organic liquid. ... organic liquid vaporizes at a temperature below its boiling point in steam distillation without decomposing.

If the amount of the steam used in steam distillation is increased, the temperature of distillation (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on relative volatility

Description : If the amount of the steam used in steam distillation is increased, the temperature of distillation (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on relative volatility

Last Answer : (B) Decreases

Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Description : Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Last Answer : (B) Adsorption

Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a suitable membrane is called dialysis (C) Freeze drying is used for the drying of fish (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Description : Pick out the wrong statement: (A) Reboiler is not used in open steam distillation (B) The separation of solutes of different molecular sizes in a liquid solution by use of a ... is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

Last Answer : (D) Fenske-Underwood equation is used for calculating theoretical number of plates in a distillation column at normal operating reflux condition

steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Description : steam distillation, the (A) Temperature is 100°C(B) Temperature is more than 100° C (C) Product must be immiscible with water (D) Temperature is higher than the boiling point of either component

Last Answer : (C) Product must be immiscible with water

Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Description : Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Last Answer : Ans:(d)

Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Description : Priming in a distillation column (A) Results from very low gas velocity (B) Is desirable from point efficiency consideration (C) Is characterised by the presence of foam throughout the space between trays (D) Reduces the overall pressure drop

Last Answer : (C) Is characterised by the presence of foam throughout the space between trays

Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of the aluminium deposited on the cathode comes from cryolite (C) Sodium is deposited along with aluminium, but is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Description : In the atmospheric pressure crude distillation, the content of __________ from lighter fraction to heavier ones. (A) Sulphur increases (B) Sulphur decreases (C) Nitrogen decreases (D) None of these

Last Answer : (A) Sulphur increases

At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Description : At __________ reflux, theoretical number of plates in a distillation coloumn is calculated using Fenske-Underwood equation. (A) Operating (B) Total (C) Minimum (D) Maximum permissible

Last Answer : (B) Total

Gasoline extracted from natural gas (by compression and cooling) is called the __________ gasoline. (A) Polymer (B) Unleaded (C) Casing head (D) Straight run

Description : Gasoline extracted from natural gas (by compression and cooling) is called the __________ gasoline. (A) Polymer (B) Unleaded (C) Casing head (D) Straight run

Last Answer : (B) Unleaded

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20