Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Hydrogenation of oil is carried out in a/an __________ in Vanaspati
manufacturing plant.
(A) Agitated vessel
(B) Sieve tray column
(C) Bubble cap column
(D) Packed tower
by

1 Answer

Answer :

(A) Agitated vessel
by

Related questions

__________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Description : __________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Last Answer : (D) Packed

Small dia distillation column can be a (A) Packed column (B) Sieve tray (C) Bubble cap (D) Any of these

Description : Small dia distillation column can be a (A) Packed column (B) Sieve tray (C) Bubble cap (D) Any of these

Last Answer : (A) Packed column

Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Description : Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Last Answer : (D) Spray towers

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Description : Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Last Answer : (D) Wetted wall column

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

__________ columns are used for liquid dispersion in a continuous gas phase. (A) Packed (B) Pulse (C) Bubble cap (D) Sieve plate

Description : __________ columns are used for liquid dispersion in a continuous gas phase. (A) Packed (B) Pulse (C) Bubble cap (D) Sieve plate

Last Answer : (A) Packed

. __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Description : . __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Last Answer : (B) Bubble

When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Description : When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Last Answer : (D) Bubble

Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Description : Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Last Answer : (D) Wetted wall

Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Description : Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Last Answer : (D) Bubble cap tower

. The most widely used crude topping column in refineries is the__________ column.(A) Bubble-cap(B) Packed bed(C) Fluidised bed(D) Perforated plate

Description : . The most widely used crude topping column in refineries is the__________ column. (A) Bubble-cap (B) Packed bed (C) Fluidised bed (D) Perforated plate

Last Answer : (A) Bubble-cap

Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Description : Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Last Answer : Option B

Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Description : Commercial production of Vanaspati is done by __________ of edible vegetable oils. (A) Hydrogenation (B) Oxidation (C) Hydrolysis (D) Hydrocracking

Last Answer : (A) Hydrogenation

Preparation of `Dalda or Vanaspati' ghee from vegetable oil utilizes the following process : (1) Hydrolysis (2) Qxidation (3) Hydrogenation (4) Ozonolysis

Description : Preparation of `Dalda or Vanaspati' ghee from vegetable oil utilizes the following process : (1) Hydrolysis (2) Qxidation (3) Hydrogenation (4) Ozonolysis

Last Answer : (3) Hydrogenation Explanation: The largest. scale application of hydrogenation is for the processing of vegetable oils (fats to give margarine and related spreads and shortenings). Typical vegetable oils ... liquid vegetable oils into solid or semi-solid fats, such as those present in margarine.

Preparation of ‘Dalda or Vanaspati’ ghee from vegetable oil utilizes the following process : (1) Hydrolysis (2)Oxidation (3) Hydrogenation (4) Ozonolysis

Description : Preparation of ‘Dalda or Vanaspati’ ghee from vegetable oil utilizes the following process : (1) Hydrolysis (2)Oxidation (3) Hydrogenation (4) Ozonolysis

Last Answer : Hydrogenation

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Description : Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Last Answer : (A) Packed column (with stacked packing)

Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Description : Partial hydrogenation of vegetable oils in the presence of Ni catalyst at 200°C gives (a) Vanaspati ghee (b) Margarine (c) Both of these (d) None of these

Last Answer : Vanaspati ghee

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Description : Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Last Answer : (A) Pachuka tank

Which of the following equipments is not used for liquid dispersion? (A) Wetted wall towers (B) Packed towers (C) Venturi scrubbers (D) Agitated vessels

Description : Which of the following equipments is not used for liquid dispersion? (A) Wetted wall towers (B) Packed towers (C) Venturi scrubbers (D) Agitated vessels

Last Answer : (D) Agitated vessels

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Description : Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Last Answer : (D) Truck/tunnel

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Description : At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Last Answer : (A) Is greater than

Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Description : Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Last Answer : (A) 2

Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Description : Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Last Answer : (B) Baffle

Operating velocity in a packed tower is usually __________ the flooding velocity. (A) Half (B) Twice (C) Equal to (D) More than

Description : Operating velocity in a packed tower is usually __________ the flooding velocity. (A) Half (B) Twice (C) Equal to (D) More than

Last Answer : (A) Half

__________ extractor is used for the concentration of radioactive nuclear waste. (A) Pulsed column (B) Sieve plate (C) Mixer-settler (D) Bollman

Description : __________ extractor is used for the concentration of radioactive nuclear waste. (A) Pulsed column (B) Sieve plate (C) Mixer-settler (D) Bollman

Last Answer : (A) Pulsed column

In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Description : In distillation columns, the number of bubble caps per tray primarily depends upon the (A) Allowable liquid velocity (B) Allowable gas velocity (C) Allowable gas and liquid velocities

Last Answer : (C) Allowable gas and liquid velocities

Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Description : Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Last Answer : (B) 30

Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Description : Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Last Answer : (A) Centrifugal

__________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Description : __________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Last Answer : C) Plate

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

When a multistage tray tower uses a minimum reflux ratio, it implies (A) Infinite trays and maximum reboiler heat load (B) Infinite trays and minimum reboiler heat load (C) Minimum trays and minimum reboiler heat load (D) Minimum trays and maximum reboiler heat load

Description : When a multistage tray tower uses a minimum reflux ratio, it implies (A) Infinite trays and maximum reboiler heat load (B) Infinite trays and minimum reboiler heat load (C) Minimum trays and minimum reboiler heat load (D) Minimum trays and maximum reboiler heat load

Last Answer : (A) Infinite trays and maximum reboiler heat load

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

The principal pathway of water translocation in angiosperms is (a) sieve cells (b) sieve tube elements (c) xylem vessel system (d) xylem and phloem

Description : The principal pathway of water translocation in angiosperms is (a) sieve cells (b) sieve tube elements (c) xylem vessel system (d) xylem and phloem

Last Answer : a) sieve cells

Bordered pits are found in (a) sieve cells (b) vessel wall (c) companion cells (d) sieve tube wall.

Description : Bordered pits are found in (a) sieve cells (b) vessel wall (c) companion cells (d) sieve tube wall.

Last Answer : (b) vessel wall

A common structural feature of vessel elements and sieve tube elements is (a) enucleate condition (b) thick secondary walls (c) pores on lateral walls (d) presence of P-protein

Description : A common structural feature of vessel elements and sieve tube elements is (a) enucleate condition (b) thick secondary walls (c) pores on lateral walls (d) presence of P-protein

Last Answer : (a) enucleate condition

Companion cells are closely associated with (a) sieve elements (b) vessel elements (c) trichomes (d) guard cells.

Description : Companion cells are closely associated with (a) sieve elements (b) vessel elements (c) trichomes (d) guard cells.

Last Answer : a) sieve elements

Bordered pits are found in (a) sieve cells (b) vessel wall (c) companion cells (d) sieve tube wall

Description : Bordered pits are found in (a) sieve cells (b) vessel wall (c) companion cells (d) sieve tube wall

Last Answer : (b) vessel wall

A common structural feature of vessel elements and sieve tube elements is (a) enucleate condition (b) thick secondary walls (c) pores on lateral walls (d) presence of P-protein.

Description : A common structural feature of vessel elements and sieve tube elements is (a) enucleate condition (b) thick secondary walls (c) pores on lateral walls (d) presence of P-protein.

Last Answer : (a) enucleate condition

Companion cells are closely associated with (a) sieve elements (b) vessel elements (c) trichomes (d) guard cells.

Description : Companion cells are closely associated with (a) sieve elements (b) vessel elements (c) trichomes (d) guard cells.

Last Answer : (a) sieve elements

Companion cells are closely associated with (1) Guard cells (2) Sieve elements (3) Vessel elements (4) Trichomes

Description : Companion cells are closely associated with (1) Guard cells (2) Sieve elements (3) Vessel elements (4) Trichomes

Last Answer : (2) Sieve elements

Massecuite is a terminology used in the __________ industry. (A) Paint (B) Oil hydrogenation (C) Soap (D) Sugar

Description : Massecuite is a terminology used in the __________ industry. (A) Paint (B) Oil hydrogenation (C) Soap (D) Sugar

Last Answer : (D) Sugar

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion