In case of liquids, the binary diffusivity is proportional to (where, T = temperature) (A) T (B) √T (C) T 2 (D) 1/T

In case of liquids, the binary diffusivity is proportional to (where, T =

temperature)

(A) T

(B) √T

(C) T

2

(D) 1/T

by

1 Answer

Answer :

(A) T


by

Related questions

The Knudsen diffusivity is proportional to (where, T = absolute temperature) (A) √T (B) T 2 (C) T (D) T 4

Description : The Knudsen diffusivity is proportional to (where, T = absolute temperature) (A) √T (B) T 2 (C) T (D) T 4

Last Answer : (A) √T

In case of isentropic flow, the speed of sound in an ideal gas is proportional to (where, T = absolute temperature). (A) 1/√T (B) 1/T (C) √T (D) T

Description : In case of isentropic flow, the speed of sound in an ideal gas is proportional to (where, T = absolute temperature). (A) 1/√T (B) 1/T (C) √T (D) T

Last Answer : (C) √T

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

In case of gases, the binary diffusivity is proportional to (where, P = pressure). (A) P (B) 1/P (C) 1/√P (D) √P

Description : In case of gases, the binary diffusivity is proportional to (where, P = pressure). (A) P (B) 1/P (C) 1/√P (D) √P

Last Answer : (B) 1/P

Translational kinetic energy of molecules of an ideal gas is proportional to (where, T = absolute temperature of the gas) (A) T (B) √T (C) T2 (D) 1/√T

Description : Translational kinetic energy of molecules of an ideal gas is proportional to (where, T = absolute temperature of the gas) (A) T (B) √T (C) T2 (D) 1/√T

Last Answer : (A) T

Velocity of a gas in sound is not proportional to (where, T = Absolute temperature of the gas. P = Absolute pressure of the gas. y = Ratio of specific heats (Cp/Cv) ρ = specific weight of the gas) (A) √T (B) 1/√P (C) √y (D) 1/√ρ

Description : Velocity of a gas in sound is not proportional to (where, T = Absolute temperature of the gas. P = Absolute pressure of the gas. y = Ratio of specific heats (Cp/Cv) ρ = specific weight of the gas) (A) √T (B) 1/√P (C) √y (D) 1/√ρ

Last Answer : (B) 1/√P

The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Description : The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Last Answer : (C) Ideal gases

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Description : The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Last Answer : (B) T

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Description : The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Last Answer : (C) T

From collision theory, the reaction rate constant is proportional to (A) exp (-E/RT) (B) exp (-E/2RT) (C) √T (D) T m exp (-E/RT)

Description : From collision theory, the reaction rate constant is proportional to (A) exp (-E/RT) (B) exp (-E/2RT) (C) √T (D) T m exp (-E/RT)

Last Answer : (D) T m exp (-E/RT)

Knudsen diffusion is directly proportional to (A) T (B) √T (C) 1/√T (D) T

Description : Knudsen diffusion is directly proportional to (A) T (B) √T (C) 1/√T (D) T

Last Answer : (B) √T

The diffusivity (D) in a binary gas mixture is related to the temperature (T) as (A) D ∝ T (B) D ∝ T 0.5 (C) D ∝ T 1.5 (D) D ∝ T

Description : The diffusivity (D) in a binary gas mixture is related to the temperature (T) as (A) D ∝ T (B) D ∝ T 0.5 (C) D ∝ T 1.5 (D) D ∝ T

Last Answer : (C) D ∝ T 1.5

In case of liquid-liquid binary diffusion, diffusivity of one constituent into another is not dependent on the (A) Temperature and pressure (B) Concentration (C) Nature of the constituents (D) None of these

Description : In case of liquid-liquid binary diffusion, diffusivity of one constituent into another is not dependent on the (A) Temperature and pressure (B) Concentration (C) Nature of the constituents (D) None of these

Last Answer : (D) None of these

In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure

As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Description : As per Gilliland's equation, the diffusivity is (A) Directly proportional to 'T 1.5 ' (B) Inversely proportional to 'P' (C) Dependent on the molecular volume & molecular weight of components (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

According to Arrhenius equation of temperature dependency of rate constant for an elementary reaction (A) k ∝ √T (B) k ∝ e -E/RT (C) k ∝ T e -E/RT (D) None of these

Description : According to Arrhenius equation of temperature dependency of rate constant for an elementary reaction (A) k ∝ √T (B) k ∝ e -E/RT (C) k ∝ T e -E/RT (D) None of these

Last Answer : (B) k ∝ e -E/RT

Rate constant 'k' and absolute temperature 'T' are related by collision theory (for bimolecular) as (A) k ∝ T 1.5 (B) k ∝ exp(-E/RT) (C) k ∝ √T (D) k ∝ T

Description : Rate constant 'k' and absolute temperature 'T' are related by collision theory (for bimolecular) as (A) k ∝ T 1.5 (B) k ∝ exp(-E/RT) (C) k ∝ √T (D) k ∝ T

Last Answer : (C) k ∝ √T

The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Description : The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

The local surface conductance for laminar film condensation on vertical surface is (where, t = film thickness) (A) ∝ t (B) ∝ 1/t (C) ∝ √t (D) Independent of 't

Description : The local surface conductance for laminar film condensation on vertical surface is (where, t = film thickness) (A) ∝ t (B) ∝ 1/t (C) ∝ √t (D) Independent of 't

Last Answer : (B) ∝ 1/t

Transition state theory relates the above quantities as (A) k ∝ e -E/RT (B) k ∝ T.e E/RT (C) k ∝ √T (D) k ∝ T 1.5

Description : Transition state theory relates the above quantities as (A) k ∝ e -E/RT (B) k ∝ T.e E/RT (C) k ∝ √T (D) k ∝ T 1.5

Last Answer : (B) k ∝ T.e E/RT

Which of the following represents the Virial equation of state? (A) T = [RT/(V- b)] - [a/√T. V(V + b)] (B) PV/RT = 1 + (B/V) + (C/V2) + …… (C) n1u2 + μ2μ1 = 0 (D) None of these

Description : Which of the following represents the Virial equation of state? (A) T = [RT/(V- b)] - [a/√T. V(V + b)] (B) PV/RT = 1 + (B/V) + (C/V2) + …… (C) n1u2 + μ2μ1 = 0 (D) None of these

Last Answer : (B) PV/RT = 1 + (B/V) + (C/V2) + ……

According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Description : According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Last Answer : (A) D

The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity) (A) 1/k (B) k (C) k2 (D) 1/k2

Description : Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity) (A) 1/k (B) k (C) k2 (D) 1/k2

Last Answer : (B) k

The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Description : The binary diffusivity in gases at atmospheric conditions is about (A) 10 -9 cm/sec (B) 10 -1 cm2 /sec (C) 10 -3 sec/cm (D) 10 -4 cm2 /sec

Last Answer : (B) 10 -1 cm2 /sec

During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Description : During agitation of liquids, power consumption during laminar flow is not proportional to the (A) Density of the liquid (B) Viscosity of the liquid (C) Cube of impeller diameters (D) Square of rotational speed

Last Answer : (A) Density of the liquid

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Collision theory gives the rate constant for bimolecular reaction as (A) K α √T.e -E/RT (B) K α e E/RT (C) K α e -E/RT (D) None of these

Description : Collision theory gives the rate constant for bimolecular reaction as (A) K α √T.e -E/RT (B) K α e E/RT (C) K α e -E/RT (D) None of these

Last Answer : (C) K α e -E/RT

For a solution of volatile liquids, the partial vapour pressure of each component in solution is directly proportional to its (a) Molarity (b) Mole fraction (c) Molality (d) Normality

Description : For a solution of volatile liquids, the partial vapour pressure of each component in solution is directly proportional to its (a) Molarity (b) Mole fraction (c) Molality (d) Normality

Last Answer : Ans:(b)

Pick out the correct statement. (A) Diffusivity decreases with increase in temperature (B) Diffusivity increases with increase in molecular weight (C) Diffusivity increases with the size of the individual molecule (D) None of these

Description : Pick out the correct statement. (A) Diffusivity decreases with increase in temperature (B) Diffusivity increases with increase in molecular weight (C) Diffusivity increases with the size of the individual molecule (D) None of these

Last Answer : (D) None of these

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Molecular diffusivity of a liquid (A) Increases with temperature (B) Decreases with temperature (C) May increase or decrease with temperature (D) Is independent of temperature

Description : Molecular diffusivity of a liquid (A) Increases with temperature (B) Decreases with temperature (C) May increase or decrease with temperature (D) Is independent of temperature

Last Answer : (A) Increases with temperature

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process'. The diffusivity under this condition is called 'Knudsen diffusivity', which is affected by the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Description : 1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Last Answer : Option A

Stefan-Boltzmann law which describes the radiation heat transfer states that, it is proportional to (where, t = temperature in °C T = absolute temperature in ° K) (A) t 4 (B) T 4 (C) 1/t 4 (D) 1/T 4

Description : Stefan-Boltzmann law which describes the radiation heat transfer states that, it is proportional to (where, t = temperature in °C T = absolute temperature in ° K) (A) t 4 (B) T 4 (C) 1/t 4 (D) 1/T 4

Last Answer : (B) T

The thermal radiation emitted by a body is proportional to T n , where T is its absolute temperature. The value of 'n' is exactly 4 for (A) Black painted bodies only (B) All bodies (C) Polished bodies only (D) A black body

Description : The thermal radiation emitted by a body is proportional to T n , where T is its absolute temperature. The value of 'n' is exactly 4 for (A) Black painted bodies only (B) All bodies (C) Polished bodies only (D) A black body

Last Answer : (B) All bodies

The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Description : The ratio of thermal & electrical conductivity is same for all the metals at the same temperature; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) (A) T (B) 1/T (C) T2 (D) 1/T2

Last Answer : A) T

The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Description : The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Last Answer : (B) T and P

In case of a multipass shell and tube heat exchanger, the temperature drop in the fluid (A) Is inversely proportional to the resistance across which the drop occurs (B) And the wall are proportional to individual resistances (C) And the wall is not related (D) None of these

Description : In case of a multipass shell and tube heat exchanger, the temperature drop in the fluid (A) Is inversely proportional to the resistance across which the drop occurs (B) And the wall are proportional to individual resistances (C) And the wall is not related (D) None of these

Last Answer : (B) And the wall are proportional to individual resistances

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Which of the following is not used as a filter medium in case of corrosive liquids? (A) Nylon (B) Glass cloth (C) Metal cloth of monel or stainless steel (D) Cotton fabric

Description : Which of the following is not used as a filter medium in case of corrosive liquids? (A) Nylon (B) Glass cloth (C) Metal cloth of monel or stainless steel (D) Cotton fabric

Last Answer : (D) Cotton fabric

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Kinetic energy of the molecules in terms of absolute temperature (T) is proportional to  (a) T  (b) j  (c) J2  (d) Vr  (e) 1/Vr.

Description : Kinetic energy of the molecules in terms of absolute temperature (T) is proportional to  (a) T  (b) j  (c) J2  (d) Vr  (e) 1/Vr.

Last Answer : Answer : a

In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Description : In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Last Answer : (B) Peclet

Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)