1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

1. __________ of air does not increase with increase in temperature.
(A) Density
(B) Thermal diffusivity
(C) Viscosity
(D) Thermal conductivi
by

1 Answer

Answer :

Option A
by

Related questions

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Last Answer : (B) Prandtl

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Description : Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases because of the (A) Increased diffusivity (B) Decreased viscosity of liquid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : With increase in temperature, the leaching rate increases due to (A) Decreased liquid viscosity (B) Increased diffusivity (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Description : The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Last Answer : (C) Kinematic viscosity

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Description : The type of liquor circulation system to be ' employed in evaporators (viz. natural or forced circulation) is determined mainly by the __________ of the liquid. (A) Viscosity (B) Density (C) Thermal conductivity (D) Corrosive nature

Last Answer : (A) Viscosity

Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Description : Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity

Last Answer : (A) Boiling point (at the same pressure)

The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are same for, NPr = NSc = __________ (A) 1 (B) 0.5 (C) 10 (D) 0

Description : The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are same for, NPr = NSc = __________ (A) 1 (B) 0.5 (C) 10 (D) 0

Last Answer : (A) 1

The ratio of momentum diffusivity to thermal diffusivity is the __________ number. (A) Prandtl (B) Nusselt (C) Stanton (D) Grashoff

Description : The ratio of momentum diffusivity to thermal diffusivity is the __________ number. (A) Prandtl (B) Nusselt (C) Stanton (D) Grashoff

Last Answer : (A) Prandtl

Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Description : Heat transfer occurs by natural convection because change in temperature causes difference in (A) Viscosity (B) Density (C) Thermal conductivity (D) Heat capacity

Last Answer : (B) Density

Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air (C) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Description : Pick out the wrong statement. (A) The mass diffusivity, the thermal diffusivity and the eddy momentum diffusivity are the same for NSc = NPr= 1 (B) 1 Nm3 of dry air is lighter ... ) The Lewis number of a mixture is unity, when the thermal diffusivity is equal to the mass diffusivity

Last Answer : (B) 1 Nm3 of dry air is lighter than 1Nm3 of humid air

Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Last Answer : (A) Kinematic viscosity

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Description : Among liquids, water has a comparatively high value of thermal conductivity, due to its (A) Low density (B) High viscosity (C) Partial ionisation (D) Dense structure

Last Answer : (C) Partial ionisation

. (NSh /NRe .NSc ) is termed in mass transfer operation as the (A) Stanton number (B) Peclet number (C) Thermal diffusivity (D) Momentum diffusivity

Description : . (NSh /NRe .NSc ) is termed in mass transfer operation as the (A) Stanton number (B) Peclet number (C) Thermal diffusivity (D) Momentum diffusivity

Last Answer : (A) Stanton number

If mass diffusivity in a mixture is equal to the thermal diffusivity, then the Lewis number is (A) 0 (B) 1 (C) < 1 (D) > 1

Description : If mass diffusivity in a mixture is equal to the thermal diffusivity, then the Lewis number is (A) 0 (B) 1 (C) < 1 (D) > 1

Last Answer : (B) 1

Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of (A) Mass diffusivity to momentum diffusivity (B) Thermal diffusivity to mass diffusivity (C) Momentum diffusivity to thermal diffusivity (D) None of these

Description : Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of (A) Mass diffusivity to momentum diffusivity (B) Thermal diffusivity to mass diffusivity (C) Momentum diffusivity to thermal diffusivity (D) None of these

Last Answer : (B) Thermal diffusivity to mass diffusivity

In physical terms, Schmidt number means (A) Thermal diffusivity/mass diffusivity(B) Thermal diffusivity/momentum diffusivity(C) Momentum diffusivity/mass diffusivity(D) Mass diffusivity/thermal diffusivity

Description : In physical terms, Schmidt number means (A) Thermal diffusivity/mass diffusivity (B) Thermal diffusivity/momentum diffusivity (C) Momentum diffusivity/mass diffusivity (D) Mass diffusivity/thermal diffusivity

Last Answer : (C) Momentum diffusivity/mass diffusivity

The Schmidt number which is defined as, μ/ρ D, is the ratio of the (A) Momentum diffusivity to the mass diffusivity (B) Thermal diffusivity to the mass diffusivity (C) Momentum diffusivity to the thermal diffusivity (D) None of these

Description : The Schmidt number which is defined as, μ/ρ D, is the ratio of the (A) Momentum diffusivity to the mass diffusivity (B) Thermal diffusivity to the mass diffusivity (C) Momentum diffusivity to the thermal diffusivity (D) None of these

Last Answer : (A) Momentum diffusivity to the mass diffusivity

Prandtl number is the ratio of (A) Mass diffusivity to thermal diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Description : Prandtl number is the ratio of (A) Mass diffusivity to thermal diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Last Answer : (B) Momentum diffusivity to thermal diffusivity

Thermal diffusivity is the most important in heat transfer by (A) Conduction (B) Radiation

Description : Thermal diffusivity is the most important in heat transfer by (A) Conduction (B) Radiation

Last Answer : (A) Conduction

Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Description : Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Last Answer : (B) Heat flux

Prandtl number is the ratio of (A) Momentum diffusivity to mass diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Description : Prandtl number is the ratio of (A) Momentum diffusivity to mass diffusivity (B) Momentum diffusivity to thermal diffusivity (C) Thermal diffusivity to mass diffusivity (D) Thermal diffusivity to momentum diffusivity

Last Answer : (B) Momentum diffusivity to thermal diffusivity

Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Description : Thermal diffusivity of a material (A) Has the unit m2 /sec (B) Is defined as K/ρ . Cp (C) Is the ratio of thermal conductivity to thermal capacity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Description : In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Last Answer : (C) Thermal conductivity

Prandtl number is the reciprocal of (A) Thermal diffusivity/Momentum diffusivity (B) Thermal diffusivity × Momentum (C) Thermal diffusivity × Mass diffusivity (D) Mass diffusivity × Momentum diffusivity

Description : Prandtl number is the reciprocal of (A) Thermal diffusivity/Momentum diffusivity (B) Thermal diffusivity × Momentum (C) Thermal diffusivity × Mass diffusivity (D) Mass diffusivity × Momentum diffusivity

Last Answer : (A) Thermal diffusivity/Momentum diffusivity

Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity) (A) 1/k (B) k (C) k2 (D) 1/k2

Description : Thermal diffusivity of a substance is proportional to (where, k = Thermal conductivity) (A) 1/k (B) k (C) k2 (D) 1/k2

Last Answer : (B) k

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the oil may cause the sheath to burst (c) Unequal expansion may create voids in the insulation which will lead to ionization (d) The thermal instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Description : Due to which of the following reasons the cables should not be operated too hot ? (a) The oil may loose its viscosity and it may start drawing off from higher levels (b) Expansion of the ... instability may rise due to the rapid increase of dielectric losses with temperature (e) All of the above

Last Answer : (e) All of the above

Pick out the correct statement. (A) Diffusivity decreases with increase in temperature (B) Diffusivity increases with increase in molecular weight (C) Diffusivity increases with the size of the individual molecule (D) None of these

Description : Pick out the correct statement. (A) Diffusivity decreases with increase in temperature (B) Diffusivity increases with increase in molecular weight (C) Diffusivity increases with the size of the individual molecule (D) None of these

Last Answer : (D) None of these

Molecular diffusivity of a liquid (A) Increases with temperature (B) Decreases with temperature (C) May increase or decrease with temperature (D) Is independent of temperature

Description : Molecular diffusivity of a liquid (A) Increases with temperature (B) Decreases with temperature (C) May increase or decrease with temperature (D) Is independent of temperature

Last Answer : (A) Increases with temperature

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

What does thermal diffusivity of metals signify.

Description : What does thermal diffusivity of metals signify.

Last Answer : Thermal diffusivity is associated with the speed of propagation of heat into solids during changes in temperature with time.

A bimetallic strip commonly found in home furnace thermostats works because of the difference in this property of the two metals. Is it: w) thermal shock x) thermal conductivity y) thermal expansion z) thermal diffusivity

Description : A bimetallic strip commonly found in home furnace thermostats works because of the difference in this property of the two metals. Is it: w) thermal shock x) thermal conductivity y) thermal expansion z) thermal diffusivity

Last Answer : ANSWER: Y -- THERMAL EXPANSION

Viscosity of gases __________ with increase in temperature. (A) Increase very rapidly (B) Increase slowly (C) Decrease slowly (D) Remain unaffected

Description : Viscosity of gases __________ with increase in temperature. (A) Increase very rapidly (B) Increase slowly (C) Decrease slowly (D) Remain unaffected

Last Answer : (B) Increase slowly

Addition of stabiliser during PVC manufacture is done to (A) Improve its impact strength (B) Improve its elasticity (C) Reduce the melt viscosity & glass transition temperature (D) Prevent its thermal degradation

Description : Addition of stabiliser during PVC manufacture is done to (A) Improve its impact strength (B) Improve its elasticity (C) Reduce the melt viscosity & glass transition temperature (D) Prevent its thermal degradation

Last Answer : (D) Prevent its thermal degradation

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

With increase in density, the viscosity of petroleum products (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B)

Description : With increase in density, the viscosity of petroleum products (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B)

Last Answer : (A) Increases

For a first order isothermal chemical reaction in a porous catalyst, the effectiveness factor is 0.3. The effectiveness factor will increase if the (A) Catalyst size is reduced or the catalyst diffusivity is reduced (B) Catalyst size is reduced or the catalyst diffusivity is increased (C) Catalyst size is increased or the catalyst diffusivity is reduced(D) Catalyst size is increased or the catalyst diffusivity is increased

Description : For a first order isothermal chemical reaction in a porous catalyst, the effectiveness factor is 0.3. The effectiveness factor will increase if the (A) Catalyst size is reduced or the ... the catalyst diffusivity is reduced (D) Catalyst size is increased or the catalyst diffusivity is increased

Last Answer : (B) Catalyst size is reduced or the catalyst diffusivity is increased

Viscosity of water is about __________ times that of air at room temperature. (A) 15 (B) 55 (C) 155 (D) 1050

Description : Viscosity of water is about __________ times that of air at room temperature. (A) 15 (B) 55 (C) 155 (D) 1050

Last Answer : (B) 55

The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Last Answer : (B) Water

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Description : The driving potential for the crystal growth during crystallisation is the __________ of the solution. (A) Concentration (B) Viscosity (C) Super-saturation (D) Density

Last Answer : (C) Super-saturation

In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Description : In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Last Answer : (B) Peclet

Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Description : Liquid diffusivity is of the order of __________ cm2 /second. (A) 0.01 (B) 0.1 (C) 10 -5 to 10 -6 (D) > 1

Last Answer : (C) 10 -5 to 10

Gaseous diffusivity at atmospheric pressure is of the order of __________ cm2 /second. (A) 1 (B) 1 to 5 (C) 5 to 10 (D) > 10

Description : Gaseous diffusivity at atmospheric pressure is of the order of __________ cm2 /second. (A) 1 (B) 1 to 5 (C) 5 to 10 (D) > 10

Last Answer : (A) 1