Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Solvent used in extractive distillation
(A) Is of low volatility
(B) Forms a low boiling azeotrope
(C) Forms a high boiling azeotrope
(D) Does not alter the relative volatility of the original components
by

1 Answer

Answer :

(B) Forms a low boiling azeotrope
by

Related questions

Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Description : Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Last Answer : (A) Changes the relative volatility of the original components

In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Last Answer : (A) Added to alter the relative volatility of the mixture

In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Last Answer : (C) Extractive

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture

For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Description : For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Last Answer : (D) An azeotrope may be formed during distillation

Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Description : Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Last Answer : (C) Having very wide boiling points

Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Last Answer : (D) Simple

In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent heat of vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Description : In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent ... vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Last Answer : (D) A total condenser is used

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Last Answer : (D) Leaching

Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Description : Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Last Answer : Ans:(d)

Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Last Answer : (B) Have very wide boiling points

High pressure at the bottom of a distillation tower handling heat sensitive materials results in (A) Thermal decomposition of bottoms (B) Increased relative volatility (C) Erosion of the tower (D) Very efficient operation

Description : High pressure at the bottom of a distillation tower handling heat sensitive materials results in (A) Thermal decomposition of bottoms (B) Increased relative volatility (C) Erosion of the tower (D) Very efficient operation

Last Answer : (A) Thermal decomposition of bottoms

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Description : Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1

Description : The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1

Last Answer : (C) > 1

If the amount of the steam used in steam distillation is increased, the temperature of distillation (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on relative volatility

Description : If the amount of the steam used in steam distillation is increased, the temperature of distillation (A) Increases (B) Decreases (C) Remains unchanged (D) Depends on relative volatility

Last Answer : (B) Decreases

Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) shows negative deviation from ideality (C) Mixture (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Description : Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) ... (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Last Answer : (A) Relative volatility is reasonably constant

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

Separation of two volatile liquids by distillation makes use of their (A) Selectivity (B) Relative volatility (C) Solubility (D) Density difference

Description : Separation of two volatile liquids by distillation makes use of their (A) Selectivity (B) Relative volatility (C) Solubility (D) Density difference

Last Answer : (B) Relative volatility

Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Last Answer : (D) Steam

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Description : Solvent naphtha' used mostly as a solvent in paints and perfumery is produced by the __________ of virgin naphtha into small boiling range cuts. (A) Steam reforming (B) Distillation (C) Desulphurisation (D) None of these

Last Answer : (B) Distillation

For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Description : For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Last Answer : (D) High reflux ratio

Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Last Answer : (B) Leaching

ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Last Answer : (B) Crystallisation

Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Description : Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Last Answer : (B) Azeotropic

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Description : Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Last Answer : (B) Evaporation

Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Description : Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Last Answer : (A) Evaporation and burning the concentrate followed by causticisation of products

Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Last Answer : (A) Evaporation followed by vacuum distillation

Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Last Answer : (A) Extraction with amyl or butyl acetate

A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Description : A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Last Answer : (B) Acetone-carbon disulphide

Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Description : Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Last Answer : (B) Ethyl alcohol-water

Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Description : Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Last Answer : (A) Water-hydrochloric acid

Relative to the pure solvent, the boiling point of a solution is: w) higher x) lower y) at the same temperature

Description : Relative to the pure solvent, the boiling point of a solution is: w) higher x) lower y) at the same temperature

Last Answer : ANSWER: W -- HIGHER

Out of (a) HNO3 + H2O and (b) C6H6 + C6H5CH3 which will form max. boiling azeotrope ?

Description : Out of (a) HNO3 + H2O and (b) C6H6 + C6H5CH3 which will form max. boiling azeotrope ?

Last Answer : (a) HNO3 + H2O.

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Flash point of a liquid petroleum fuel gives an idea about its (A) Volatility (B) Explosion hazards characteristics (C) Nature of boiling point diagram (D) All (A), (B) and (C)

Description : Flash point of a liquid petroleum fuel gives an idea about its (A) Volatility (B) Explosion hazards characteristics (C) Nature of boiling point diagram (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

With increase in pressure, the relative volatility for a binary system (A) Increases (B) Decreases (C) Remains same

Description : With increase in pressure, the relative volatility for a binary system (A) Increases (B) Decreases (C) Remains same

Last Answer : (B) Decreases

In a binary system, separation is very efficient, when the relative volatility is (A) 1 (B) > 1 (C) < 1 (D) 0.5

Description : In a binary system, separation is very efficient, when the relative volatility is (A) 1 (B) > 1 (C) < 1 (D) 0.5

Last Answer : (B) > 1

Relative volatility does not change appreciably with the change in (A) Temperature (B) Vapour pressure of either component (C) Total pressure (D) None of these

Description : Relative volatility does not change appreciably with the change in (A) Temperature (B) Vapour pressure of either component (C) Total pressure (D) None of these

Last Answer : (A) Temperature

The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Description : The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Last Answer : (C) Absorption factor

When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of component B (B) Vapour pressure of component A to the total pressure (C) Vapour pressure of component A to the partial pressure of A (D) Partial pressure of component A to the total pressure

Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure

Last Answer : (A) Vapour pressure of component A to that of component B

The expression, y(1 - x)/x(1 - y) is for (A) Absorption factor (B) Relative volatility (C) Selectivity (D) Murphree efficiency

Description : The expression, y(1 - x)/x(1 - y) is for (A) Absorption factor (B) Relative volatility (C) Selectivity (D) Murphree efficiency

Last Answer : (B) Relative volatility