Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Flash distillation is suitable for separating the constituents of a binary

system, which

(A) Form minimum boiling azeotrope

(B) Have very wide boiling points

(C) Have very close boiling points

(D) Form constant boiling azeotrope

by

1 Answer

Answer :

(B) Have very wide boiling points

by

Related questions

Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Description : Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Last Answer : (C) Having very wide boiling points

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Description : For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation

Last Answer : (D) An azeotrope may be formed during distillation

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Description : Which of the following binary systems is an example of a maximum boiling azeotrope? (A) Water-hydrochloric acid (B) Acetone-carbon disulphide (C) Water-ethyl alcohol (D) n-heptane-n-octane

Last Answer : (A) Water-hydrochloric acid

Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Description : Pick out the system with minimum boiling azeotrope at 1 atm. (A) Benzene-toluene (B) Ethyl alcohol-water (C) Hydrochloric acid-water (D) All (A), (B) and (C)

Last Answer : (B) Ethyl alcohol-water

A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Description : A minimum boiling azeotrope is exemplified by (A) Toluene-benzene (B) Acetone-carbon disulphide (C) Water-isobutyl alcohol (D) None of these

Last Answer : (B) Acetone-carbon disulphide

In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent heat of vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Description : In distillation column design, the McCabe-Thiele procedure is inadequate and a Ponchan-Savarit procedure is needed, when (A) Saturated feed is not used (B) An azeotrope forms (C) The latent ... vaporisation of the more and less volatile components are greatly different (D) A total condenser is used

Last Answer : (D) A total condenser is used

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems

Description : Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems

Last Answer : (B) Used for multi-component systems like crude refining

Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Last Answer : (D) Simple

The noble gases have low boiling points because: w) their ionization potentials are very low x) only weak Van der Waals forces hold the atoms together y) they are produced by the fractional distillation of liquid air z) they have eight electrons in the outer shell

Description : The noble gases have low boiling points because: w) their ionization potentials are very low x) only weak Van der Waals forces hold the atoms together y) they are produced by the fractional distillation of liquid air z) they have eight electrons in the outer shell

Last Answer : ANSWER: X -- ONLY WEAK VAN DER WAALS FORCES HOLD THE ATOMS TOGETHER

Out of (a) HNO3 + H2O and (b) C6H6 + C6H5CH3 which will form max. boiling azeotrope ?

Description : Out of (a) HNO3 + H2O and (b) C6H6 + C6H5CH3 which will form max. boiling azeotrope ?

Last Answer : (a) HNO3 + H2O.

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Gibbs-Duhem equation (A) States that n1dμ1 + n2dμ2 + ....njdμj = 0, for a system of definite composition at constant temperature and pressure (B) Applies only to binary systems (C) Finds no application in gas-liquid equilibria involved in distillation (D) None of these

Description : Gibbs-Duhem equation (A) States that n1dμ1 + n2dμ2 + ....njdμj = 0, for a system of definite composition at constant temperature and pressure (B) Applies only to binary systems (C) Finds no application in gas-liquid equilibria involved in distillation (D) None of these

Last Answer : (A) States that n1dμ1 + n2dμ2 + ....njdμj = 0, for a system of definite composition at constant temperature and pressure

Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Description : Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a bottom fraction containing 98 mol% B ? Assume that relative volatility (αAB = 2) does not change appreciably in the column. (A) 5 (B) 9 (C) 12 (D) 28

Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28

Last Answer : (C) 12

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Description : Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Last Answer : Ans:(d)

The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and recondensed, and so on until all the available liquid fuels are separately recovered in the sequence of their boiling points. Such a process is called  A. cracking  B. carbonisation  C. fractional distillation  D. full distillation

Description : The distillation carried out in such a way that the liquid with the lowest boiling point is first evaporated and recondensed, then the liquid with the next higher boiling point is then evaporated and ... is called  A. cracking  B. carbonisation  C. fractional distillation  D. full distillation

Last Answer : Answer: C

Which of the following methods will separate water from muddy water? (1) Separating funnel (2) Distillation (3) Crystallization (4) Filtration

Description : Which of the following methods will separate water from muddy water? (1) Separating funnel (2) Distillation (3) Crystallization (4) Filtration

Last Answer : (4) Filtration Explanation: There are two ways to get water from a muddy mess: evaporation and filtration. Filtration is a process where the water is pumped through a porous material.

While separating a mixture of ortho and para-nitro phenols by steam distillation, name the isomer which will be steam volatile. Give reasons.

Description : While separating a mixture of ortho and para-nitro phenols by steam distillation, name the isomer which will be steam volatile. Give reasons.

Last Answer : In o-nitrophenol, there is intramolecular hydrogen bonding as follows : In p-nitrophenol, there is intramolecular hydrogen bonding as follows :   Due to intermolecular H ... -nitrophenol. Hence o-nitraphenol due to its lower b. p. is steam volatile while pnitrophenol is not.

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Description : In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Last Answer : (B) No separation will occur

An Azeotropic mixture is a __________ mixture. (A) Binary (B) Ternary (C) Constant boiling point (D) None of these

Description : An Azeotropic mixture is a __________ mixture. (A) Binary (B) Ternary (C) Constant boiling point (D) None of these

Last Answer : (C) Constant boiling point

Separating a substance from a mixture of liquid having I different boiling point is called?

Description : Separating a substance from a mixture of liquid having I different boiling point is called?

Last Answer : Distillation

One of the most common physical tests performed on fats is a determination of the ____ point. a. boiling c. melting b. cooling d. separating

Description : One of the most common physical tests performed on fats is a determination of the ____ point. a. boiling c. melting b. cooling d. separating

Last Answer : c. melting

In case of liquid-liquid binary diffusion, diffusivity of one constituent into another is not dependent on the (A) Temperature and pressure (B) Concentration (C) Nature of the constituents (D) None of these

Description : In case of liquid-liquid binary diffusion, diffusivity of one constituent into another is not dependent on the (A) Temperature and pressure (B) Concentration (C) Nature of the constituents (D) None of these

Last Answer : (D) None of these

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Description : Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) shows negative deviation from ideality (C) Mixture (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Description : Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) ... (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Last Answer : (A) Relative volatility is reasonably constant

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Description : Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Last Answer : (C) Cleveland (open cup type)

Rayleigh's equation applies to __________ distillation. (A) Continuous (B) Steam (C) Differential (D) Flash

Description : Rayleigh's equation applies to __________ distillation. (A) Continuous (B) Steam (C) Differential (D) Flash

Last Answer : (C) Differential

Rayleigh equation applies to __________ distillation. (A) Differential (B) Flash (C) Equilibrium (D) Molecular

Description : Rayleigh equation applies to __________ distillation. (A) Differential (B) Flash (C) Equilibrium (D) Molecular

Last Answer : (A) Differential

Large scale usage of flash distillation is practised in (A) Soap manufacturing (B) Ammonia synthesis plant (C) Polymerisation industry (D) Petroleum refining

Description : Large scale usage of flash distillation is practised in (A) Soap manufacturing (B) Ammonia synthesis plant (C) Polymerisation industry (D) Petroleum refining

Last Answer : (D) Petroleum refining

Drives on a road suitable for parallel traffic where the road markings separating the traffic lanes are not visible. Where can you drive continuously if the traffic on the road is insignificant? (Cross Test)

Description : In the rightmost traffic lane. In a residential area, outside any residential area in the rightmost traffic lane. In any traffic lane.   

Last Answer : In the far right lane. Explanation: This is clear from the right-of-way obligation in this case. This question can be varied in many ways, depending on whether there are road markings or not, whether ... test book! (cross test / Driving on the road / Driving on a road suitable for parallel traffic)

What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Description : What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Last Answer : (C) 1

Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Description : Which of the following mixtures does not form an azeotrope at atmospheric pressure? (A) Water-alcohol (B) Methyl alcohol-acetone (C) Butyl acetate-water (D) None of these

Last Answer : (D) None of these

For which of the following unit operations, Lewis number is ofsignificance?(A) Adsorption(B) Binary distillation(C) Gas absorption(D) Humidification

Description : For which of the following unit operations, Lewis number is ofsignificance? (A) Adsorption (B) Binary distillation (C) Gas absorption (D) Humidification

Last Answer : (D) Humidification

The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1

Description : The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1

Last Answer : (C) > 1

McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Description : McCabe-Thiele method of binary distillation does not assume that the (A) Sensible heat changes are negligible compared with latent heat changes (B) Molar latent heats of all components are equal (C) Heat of mixing is negligible (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Description : Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Last Answer : (C) Binary phase distillation

Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Description : Binary distillation involves the mass transfer by __________ at the gas￾liquid interface. (A) Unidirectional diffusion from liquid to gas phase (B) Unidirectional diffusion from gas to liquid phase (C) Either 'a' or 'b' (D) A counter diffusion at an almost equal molar rate

Last Answer : (D) A counter diffusion at an almost equal molar rate