Which of the following is an undesirable characteristic for the solvent used in gas absorption? (A) Low vapor pressure (B) Low viscosity (C) High gas solubility (D) None of these

Which of the following is an undesirable characteristic for the solvent

used in gas absorption?

(A) Low vapor pressure

(B) Low viscosity

(C) High gas solubility

(D) None of these

by

1 Answer

Answer :

(D) None of these

by

Related questions

A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Description : A good solvent used for absorption should not have very high (A) Viscosity (B) Vapor pressure (C) Freezing point (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Pick out the undesirable property for a solvent meant for dewaxing of lube oil. (A) Complete miscibility with oil (B) High solubility of wax in the solvent (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Description : Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Last Answer : (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates(D) All (A), (B) and (C)

Description : For gas absorption, low viscosity solvents are preferred, because of their (A) Better flow characteristics (B) Low pumping pressure drop (C) Rapid absorption rates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays(D) All (A), (B) and (C)

Description : Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Description : Low viscosity absorbent is preferred for reasons of (A) Rapid absorption rates and good heat transfer characteristics (B) Improved flooding characteristics (C) Low pressure drop on pumping (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following properties is lower for a solution than for the pure solvent? w) osmotic pressure x) vapor pressure y) temperature z) boiling point

Description : Which of the following properties is lower for a solution than for the pure solvent? w) osmotic pressure x) vapor pressure y) temperature z) boiling point

Last Answer : ANSWER: X -- VAPOR PRESSURE

Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point

Description : Which of the following properties is greater for a solution than for the pure solvent? w) freezing point x) vapor pressure y) temperature z) boiling point

Last Answer : ANSWER: D -- BOILING POINT

__________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Description : __________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Last Answer : (B) Viscosity

Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Description : Rate of leaching increases with increasing (A) Temperature (B) Viscosity of solvent (C) Pressure (D) Size of the solid

Last Answer : (A) Temperature

To increase the solubility of a gas in a liquid as much as possible, we would use: w) low temperature and high pressure. x) high temperature and high pressure. y) high temperature and low pressure. z) low temperature and low pressure.

Description : To increase the solubility of a gas in a liquid as much as possible, we would use: w) low temperature and high pressure. x) high temperature and high pressure. y) high temperature and low pressure. z) low temperature and low pressure.

Last Answer : ANSWER: W -- LOW TEMPERATURE AND HIGH PRESSURE.

With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Description : With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Last Answer : (A) Increases

With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Description : With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Last Answer : (B) Decreases

To increase the absorption factor, (where, G = gas flow rate, S = solvent flow rate) (A) Increase both 'G' and 'S' (B) Decrease both 'G' and 'S' (C) Increase 'S' and decrease 'G' (D) Increase 'G' and decrease 'S'

Description : To increase the absorption factor, (where, G = gas flow rate, S = solvent flow rate) (A) Increase both 'G' and 'S' (B) Decrease both 'G' and 'S' (C) Increase 'S' and decrease 'G' (D) Increase 'G' and decrease 'S'

Last Answer : (C) Increase 'S' and decrease 'G

The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling? (A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Description : The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of ... A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Last Answer : (B) Gas side

The antibodies raised against a pure protein will show only one sharp spike on this technique: (A) Solubility curve (B) Solvent precipitation (C) Molecular weight determination (D) Immuno electrophoresis

Description : The antibodies raised against a pure protein will show only one sharp spike on this technique: (A) Solubility curve (B) Solvent precipitation (C) Molecular weight determination (D) Immuno electrophoresis

Last Answer : Answer : D

A sharp moving boundary is obtained between the pure solvent and solute containing layer in (A) Chromatography (B) Immuno Reactivity (C) Ultra Centrifugation (D) Solubility curve

Description : A sharp moving boundary is obtained between the pure solvent and solute containing layer in (A) Chromatography (B) Immuno Reactivity (C) Ultra Centrifugation (D) Solubility curve

Last Answer : Answer :C

Which of the following has highest solubility in ionic solvent? (a) Silver iodide (b) Silver bromide (c) Silver chloride (d) Silver fluoride

Description : Which of the following has highest solubility in ionic solvent? (a) Silver iodide (b) Silver bromide (c) Silver chloride (d) Silver fluoride

Last Answer : Ans:(d)

Which action best accounts for the solubility of aldehydes and ketones in water? (a) Polar interactions between solute molecules. (b) H-bonding between solute molecules. (c) Van der waals forces (d) H-bonding between solute and solvent molecules

Description : Which action best accounts for the solubility of aldehydes and ketones in water? (a) Polar interactions between solute molecules. (b) H-bonding between solute molecules. (c) Van der waals forces (d) H-bonding between solute and solvent molecules

Last Answer : H-bonding between solute and solvent molecules

Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Description : Define the following : Solute , Solvent , Solution , Aqueous Solution & Solubility.

Last Answer : Ans : Solute : The component of the solution present in smaller amount is called solute. It is also defined as the substance that gets dissolved in the solvent. Example : Glucose is solute in glucose solution. ... grams / 100 grams. Solubility of sugar in water at 100 degree C is 487 grams/100 ml.

Decoction refers to the use of solvent (A) At ambient temperature (B) At its boiling point (C) In its vapor form (D) None of these

Description : Decoction refers to the use of solvent (A) At ambient temperature (B) At its boiling point (C) In its vapor form (D) None of these

Last Answer : (B) At its boiling point

In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Last Answer : (A) Added to alter the relative volatility of the mixture

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Solubility of a substance which dissolves with an increase in volume and liberation of heat will be favoured by the (A) Low pressure and high temperature (B) Low pressure and low temperature (C) High pressure and low temperature (D) High pressure and high temperature

Description : Solubility of a substance which dissolves with an increase in volume and liberation of heat will be favoured by the (A) Low pressure and high temperature (B) Low pressure and low temperature (C) High pressure and low temperature (D) High pressure and high temperature

Last Answer : (B) Low pressure and low temperature

Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Description : Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Last Answer : (C) Decrease in equilibrium solubility

Insufficient brush pressure on a DC motor may cause _______. A. generator overload B. excess residual magnetism C. water vapor absorption D. sparking of the brushes

Description : Insufficient brush pressure on a DC motor may cause _______. A. generator overload B. excess residual magnetism C. water vapor absorption D. sparking of the brushes

Last Answer : Answer: D

Henry's law is closely obeyed by a gas, when its __________ is extremely high. (A) Pressure (B) Solubility (C) Temperature (D) None of these

Description : Henry's law is closely obeyed by a gas, when its __________ is extremely high. (A) Pressure (B) Solubility (C) Temperature (D) None of these

Last Answer : (D) None of these

Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Description : Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Last Answer : (D) None of these

Mercaptans are (A) Low boiling sulphur compounds(B) Added in LPG cylinders to detect gas leakage by its smell(C) Undesirable in petrol, as they reduce its octane number(D) All (A), (B) and (C)

Description : Mercaptans are (A) Low boiling sulphur compounds (B) Added in LPG cylinders to detect gas leakage by its smell (C) Undesirable in petrol, as they reduce its octane number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The temperature affects the A. Biological activity of bacteria in sewage B. Solubility of gases in sewage C. Viscosity of sewage D. All the above

Description : The temperature affects the A. Biological activity of bacteria in sewage B. Solubility of gases in sewage C. Viscosity of sewage D. All the above

Last Answer : ANS: D

The suppressor grid is added to a tetrode to reduce what undesirable characteristic of tetrode operation?

Description : The suppressor grid is added to a tetrode to reduce what undesirable characteristic of tetrode operation?

Last Answer : Secondary emission.

Which of the following is not characteristic of the mentally retarded child? Options: A) He is generally above average in sensor motor and artistic aptitude B) He tends to display socially undesirable traits more frequently than normal children C) He tends to be retarded in his physical development D) He is relatively lacking in ability to abstract and generalize

Description : Which of the following is not characteristic of the mentally retarded child? Options: A) He is generally above average in sensor motor and artistic aptitude B) He tends to display socially ... retarded in his physical development D) He is relatively lacking in ability to abstract and generalize

Last Answer : A) He is generally above average in sensor motor and artistic aptitude 

__________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Description : __________ treatment is done for appreciable improvement in viscosity index of lubricating oil. (A) Acid (B) Solvent extraction (C) Alkali (D) Clay

Last Answer : (B) Solvent extraction

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

The most important factor governing absorption of a drug from intact skin is: A. Molecular weight of the drug B. Site of application C. Lipid solubility of the drug D. Nature of the base used in the formulation

Description : The most important factor governing absorption of a drug from intact skin is: A. Molecular weight of the drug B. Site of application C. Lipid solubility of the drug D. Nature of the base used in the formulation

Last Answer : C. Lipid solubility of the drug

The most important factor governing absorption of a drug from intact skin is: A. Molecular weight of the drug B. Site of application C. Lipid solubility of the drug D. Nature of the base used in the formulation

Description : The most important factor governing absorption of a drug from intact skin is: A. Molecular weight of the drug B. Site of application C. Lipid solubility of the drug D. Nature of the base used in the formulation

Last Answer : C. Lipid solubility of the drug

The most important factor governing absorption of a drug from intact skin is: A. Molecular weight of the drug B. Site of application C. Lipid solubility of the drug D. Nature of the base used in the formulation

Description : The most important factor governing absorption of a drug from intact skin is: A. Molecular weight of the drug B. Site of application C. Lipid solubility of the drug D. Nature of the base used in the formulation

Last Answer : C. Lipid solubility of the drug

Mercury is an ideal barometric fluid mainly due to its(A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Description : Mercury is an ideal barometric fluid mainly due to its (A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Last Answer : (D) Very low vapor pressure

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

Which of the following units is not present in both the vapor compression refrigeration system and absorption refrigeration system? (A) Expansion valve (B) Condenser (C) Refrigerator (D) Compressor

Description : Which of the following units is not present in both the vapor compression refrigeration system and absorption refrigeration system? (A) Expansion valve (B) Condenser (C) Refrigerator (D) Compressor

Last Answer : (D) Compressor

In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Description : In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Last Answer : (B) Solvent extraction