If moisture content of solid on dry basis is X, then the same on wet basis is (A) X/(X + 1) (B) X/(1 - X) (C) (1 + X)/X (D) (1 - X)/X

If moisture content of solid on dry basis is X, then the same on wet
basis is
(A) X/(X + 1)
(B) X/(1 - X)
(C) (1 + X)/X
(D) (1 - X)/X
by

1 Answer

Answer :

(A) X/(X + 1)
by

Related questions

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min

To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Description : To remove all the moisture from a wet solid it requires exposure to __________ air. (A) Perfectly dry (B) Highly humid (C) High temperature (D) None of these

Last Answer : (A) Perfectly dry

Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and equilibrium moisture in a solid is called the critical moisture (D) The driving force for mass transfer in a wet solid is its free moisture content

Description : Pick out the correct statement. (A) Bound moisture is removed during constant rate drying period (B) Free moisture is removed during falling rate drying period (C) The sum of free moisture and ... (D) The driving force for mass transfer in a wet solid is its free moisture content

Last Answer : (D) The driving force for mass transfer in a wet solid is its free moisture content

For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content

Description : For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (A) Dry of OMC and wet of OMC (B) Wet of OMC and dry of OMC (C) Wet of OMC and wet of OMC (D) Dry of OMC and dry of OMC where OMC is optimum moisture content

Last Answer : Answer: Option B

The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Description : The vapour pressure exerted by the moisture contained in a wet solid depends upon the (A) Nature of the moisture (B) Temperature (C) Nature of the solid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Humidification is the process of addition moisture in air at A. constant wet bulb temperature B. constant dry bulb temperature C. constant latent heat D. none of the above

Description : Humidification is the process of addition moisture in air at A. constant wet bulb temperature B. constant dry bulb temperature C. constant latent heat D. none of the above

Last Answer : ANSWER : B

Researchers describe seed moisture contents in terms of : a. Dry weight b. Wet weight c. Percent weight d. a & b

Description : Researchers describe seed moisture contents in terms of : a. Dry weight b. Wet weight c. Percent weight d. a & b

Last Answer : a & b

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

When there is sufficient power available some soil types are ploughed ………… A. Wet. C) Dry B. Moisture. D) Non of the above.

Description : When there is sufficient power available some soil types are ploughed ………… A. Wet. C) Dry B. Moisture. D) Non of the above.

Last Answer : Dry

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

"Dry ice" is (A) Moisture free ice (B) Solid helium (C) Solid carbon dioxide (D) None of these

Description : "Dry ice" is (A) Moisture free ice (B) Solid helium (C) Solid carbon dioxide (D) None of these

Last Answer : (C) Solid carbon dioxide

During drying of a solid, the critical moisture content increases with (A) Decreased drying rate (B) Increased thickness of the solid (C) Increased drying rate (D) Both (B) and (C)

Description : During drying of a solid, the critical moisture content increases with (A) Decreased drying rate (B) Increased thickness of the solid (C) Increased drying rate (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Description : The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Last Answer : (C) T

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification (B) Heating and dehumidification at almost constant wet bulb temperature (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Description : Which of the following psychrometric processes is followed by water vapour laden unsaturated air, when it is passed through solid or liquid adsorbent? (A) Cooling and dehumidification ... (C) Dehumidification with dry bulb temperature remaining constant (D) None of these

Last Answer : (B) Heating and dehumidification at almost constant wet bulb temperature

Which of the following does not discharge the dust collected as a dry solid? (A) Electrostatic precipitator (B) Wet scrubber (C) Bag filter (D) Gravity settling chamber

Description : Which of the following does not discharge the dust collected as a dry solid? (A) Electrostatic precipitator (B) Wet scrubber (C) Bag filter (D) Gravity settling chamber

Last Answer : (B) Wet scrubber

Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Description : Drying operation under vacuum is carried out to (A) Dry those materials which have very high unbound moisture content (B) Reduce drying temperature (C) Increase drying temperature (D) Dry materials having high bound moisture content

Last Answer : (B) Reduce drying temperature

If oxygen content in the flue gas rises too high, fuel is being wasted by (A) Incomplete combustion (B) Dry gas/stack gas loss (C) Moisture loss (D) None of these

Description : If oxygen content in the flue gas rises too high, fuel is being wasted by (A) Incomplete combustion (B) Dry gas/stack gas loss (C) Moisture loss (D) None of these

Last Answer : (B) Dry gas/stack gas loss

A field soil sample weighing 60 g, lost12 g on over dying. What is the moisture percent on dry weight basis?

Description : A field soil sample weighing 60 g, lost12 g on over dying. What is the moisture percent on dry weight basis?

Last Answer : Ans. 25%

Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Description : Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane

Last Answer : (B) Calorific value

Which of the following combination of processing and preservation techniques works best for smoked products? A. Salt and acidification B. Heat, salt, dipping in brine/ minimal moisture content C. Heat, salt, acidification/minimal moisture content D. Heat and solid content

Description : Which of the following combination of processing and preservation techniques works best for smoked products? A. Salt and acidification B. Heat, salt, dipping in brine/ minimal moisture content C. Heat, salt, acidification/minimal moisture content D. Heat and solid content

Last Answer : B. Heat, salt, dipping in brine/ minimal moisture content

CO2 measurement of Fyrite kit is based on (EA c) Weight basis (dry) c) Weight basis (wet) d) Volume basis (dry) d) Volume basis (wet)

Description : CO2 measurement of Fyrite kit is based on (EA c) Weight basis (dry) c) Weight basis (wet) d) Volume basis (dry) d) Volume basis (wet)

Last Answer : volume basis

Compare dry clutch & wet clutch on basis of

Description : Compare dry clutch & wet clutch on basis of

Last Answer : Parameter Dry Clutch Wet Clutch Construction When the clutch is operated dry i.e. without oil, it is called as a dry clutch. When the clutch is operated in an oil bath, it is ... , Bus, Truck etc. Multi-plate clutch is used in motor cycles, racing cars, heavy duty vehicles.

Transmission tissue is characteristic feature of (a) dry stigma (b) wet stigma (c) hollow style (d) solid style

Description : Transmission tissue is characteristic feature of (a) dry stigma (b) wet stigma (c) hollow style (d) solid style

Last Answer : (d) solid style.

Transmission tissue is characteristic feature of:a) Solid style b) Dry stigma c) Wet stigmad) Hollow style

Description : Transmission tissue is characteristic feature of:a) Solid style b) Dry stigma c) Wet stigmad) Hollow style

Last Answer : a) Solid style

How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Description : How do you describe the relationship between moisture content and microbial activity as the soil is gradually increased from this dry state to a saturated one What factors dictate the shape of the cur?

Last Answer : Need answer

W is the weight of soil having a moisture content w. If V is the volume of proctor's mould, the dry density of the soil is (A) WV/(1 + w) (B) V/w (1 + w) (C) W/V(1 + w) (D) V (1 + w)/W

Description : W is the weight of soil having a moisture content w. If V is the volume of proctor's mould, the dry density of the soil is (A) WV/(1 + w) (B) V/w (1 + w) (C) W/V(1 + w) (D) V (1 + w)/W

Last Answer : (C) W/V(1 + w)

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above

Description : The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above

Last Answer : (C) Both moisture content and amount of compaction energy

Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs obtained by using three compactive energies, is called line of optimus (C) Well graded coarse grained soils can be compacted to a very high density as compared to fine grained soils (D) All the above

Description : Pick up the correct statement from the following: (A) The dry density reduces by addition of water after attaining optimum moisture content (B) The line joining the peak of three moisture content graphs ... be compacted to a very high density as compared to fine grained soils (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

An indication of sensible heat content in air-water vapour mixture is a) wet bulb temperature b) dew point temperature c) density of air d) dry bulb temperature

Description : An indication of sensible heat content in air-water vapour mixture is a) wet bulb temperature b) dew point temperature c) density of air d) dry bulb temperature

Last Answer : d) dry bulb temperature

Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Description : Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. (A) Unbound (B) Critical (C) Free (D) Bound

Last Answer : (A) Unbound

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is (A) 520 (B) 200(C) 400 (D) 500

Description : 1000 kg of wet solids are to be dried from 60% to 20% moisture (by weight). The mass of moisture removed in kg is (A) 520 (B) 200 (C) 400 (D) 500

Last Answer : (C) 400

The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) Wet bulb temperature=dew point temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Description : The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) ... temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Last Answer : Option D

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And humidified (B) And dehumidified with increase in wet bulb temperature (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Description : Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And ... (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Last Answer : (D) And dehumidified with decrease in wet bulb temperature

When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew point temperature of air has not reached (C) Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Description : When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew ... Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Last Answer : (D) Air is fully saturated

The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity. (A) 0 (B) 100 (C) 50 (D) None of these

Description : The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity. (A) 0 (B) 100 (C) 50 (D) None of these

Last Answer : Option B

(4) sodium chloride contains hygroscopic impurities like magnesium chloride Explanation: Table salt is refined salt, which contains about 97 to 99 percent sodium chloride. It usually contains substances that make it freeflowing (anticaking agents) such as sodium aluminosilicate or magnesium carbonate. Because of Hygroscopic nature of salt it become wet in rainy season as the salt absorbs moisture from environment.

Description : (4) sodium chloride contains hygroscopic impurities like magnesium chloride Explanation: Table salt is refined salt, which contains about 97 to 99 percent sodium chloride. It usually contains substances that ... of salt it become wet in rainy season as the salt absorbs moisture from environment.

Last Answer : Which of the following could be used as fuel in propellant or rockets? (1) Liquid Hydrogen + Liquid Nitrogen (2) Liquid Oxygen + Liquid Argon (3) Liquid Nitrogen + Liquid Oxygen (4) Liquid Hydrogen + Liquid Oxygen

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

With increase in moisture content, the bulking of sand (A) Increases (B) Decreases (C) First increases to a certain maximum value and then decreases (D) First decreases to a certain minimum value and then increases

Description : With increase in moisture content, the bulking of sand (A) Increases (B) Decreases (C) First increases to a certain maximum value and then decreases (D) First decreases to a certain minimum value and then increases

Last Answer : Answer: Option C

Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Description : Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Last Answer : (B) Decreases

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Description : The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Last Answer : (B) T

Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Description : Equilibrium moisture of a solid is equal to the total moisture minus free moisture. Which of the following substances will have maxi-mum equilibrium moisture? (A) Anthracite coal (B) Rag paper (C) Bamboo (D) Inorganic solids

Last Answer : (C) Bamboo