Sides of equilateral-triangular co-ordinates (on which ternary liquid system is plotted) represent (A) A pure component (B) A binary mixture (C) A ternary mixture (D) Partially miscible ternary system

Sides of equilateral-triangular co-ordinates (on which ternary liquid
system is plotted) represent
(A) A pure component
(B) A binary mixture
(C) A ternary mixture
(D) Partially miscible ternary system
by

1 Answer

Answer :

(B) A binary mixture
by

Related questions

For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is represented by the apex (B) Binary mixture is represented by any point inside (C) Ternary mixture is represented by the sides (D) Pure component is represented by the apex

Description : For a ternary mixture, in which equilateral triangular co-ordinate is used in leaching and extraction, a __________ of the equilateral triangular co-ordinates. (A) Binary mixture is ... Ternary mixture is represented by the sides (D) Pure component is represented by the apex

Last Answer : (D) Pure component is represented by the apex

The apex of an equilateral-triangular coordinate (in ternary liquidsystem) represents a/an(A) Pure component(B) Binary mixture(C) Ternary mixture(D) Insoluble binary system

Description : The apex of an equilateral-triangular coordinate (in ternary liquidsystem) represents a/an (A) Pure component (B) Binary mixture (C) Ternary mixture (D) Insoluble binary system

Last Answer : (A) Pure component

In triangular co-ordinates, the ternary composition point falls __________ of the triangle. (A) In the corners(B) Inside(C) On the sides(D) None of these

Description : In triangular co-ordinates, the ternary composition point falls __________ of the triangle. (A) In the corners (B) Inside (C) On the sides (D) None of these

Last Answer : (B) Inside

A plait point is the point on the solubility curve, where the tie line reduces to a point. What is the number of plait point for a ternary system containing two pairs of partially miscible liquids? (A) 0 (B) 1 (C) 2 (D) 3

Description : A plait point is the point on the solubility curve, where the tie line reduces to a point. What is the number of plait point for a ternary system containing two pairs of partially miscible liquids? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0

Van Laar equation deals with the activity co-efficients in (A) Binary solutions (B) Ternary solutions (C) Azeotropic mixture only (D) None of these

Description : Van Laar equation deals with the activity co-efficients in (A) Binary solutions (B) Ternary solutions (C) Azeotropic mixture only (D) None of these

Last Answer : (A) Binary solutions

The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Description : The molar excess Gibbs free energy, gE, for a binary liquid mixture at T and P is given by, (gE/RT) = A . x1. x2, where A is a constant. The corresponding equation for ln y1, where y1is the activity co-efficient of component 1, is (A) A . x22 (B) Ax1 (C) Ax2 (D) Ax12

Last Answer : (A) A . x22

An Azeotropic mixture is a __________ mixture. (A) Binary (B) Ternary (C) Constant boiling point (D) None of these

Description : An Azeotropic mixture is a __________ mixture. (A) Binary (B) Ternary (C) Constant boiling point (D) None of these

Last Answer : (C) Constant boiling point

The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Description : The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Last Answer : (C) -ve

Critical solution temperature (or the con-solute temperature) for partially miscible liquids (e.g., phenol-water) is the minimum temperature at which (A) A homogeneous solution (say of phenol water) is formed (B) Mutual solubility of the two liquids shows a decreasing trend (C) Two liquids are completely separated into two layers (D) None of these

Description : Critical solution temperature (or the con-solute temperature) for partially miscible liquids (e.g., phenol-water) is the minimum temperature at which (A) A homogeneous solution (say of phenol water) is ... a decreasing trend (C) Two liquids are completely separated into two layers (D) None of these

Last Answer : (A) A homogeneous solution (say of phenol water) is formed

Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of component 'B', when (A) Only vapor phase follows Raoult's law (B) Only liquid phase obeys Dalton's law (C) Liquid phase obeys Dalton's law and vapor phase obeys Raoult's law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Description : Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of ... law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Last Answer : (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Pick out the wrong statement. (A) An ideal liquid or solid solution is defined as one in which each component obeys Raoult's law (B) If Raoult's law is applied to one component of a binary mixture; Henry's law or Raoult's law is applied to the other component also (C) Henry's law is rigorously correct in the limit of infinite dilution (D) None of these

Description : Pick out the wrong statement. (A) An ideal liquid or solid solution is defined as one in which each component obeys Raoult's law (B) If Raoult's law is applied to one component of a binary mixture; ... also (C) Henry's law is rigorously correct in the limit of infinite dilution (D) None of these

Last Answer : (D) None of these

The co-ordinates of mid-points of sides of a triangle are (1, 2), (0, –1) and (2, –1). Find its centroid. -Maths 9th

Description : The co-ordinates of mid-points of sides of a triangle are (1, 2), (0, –1) and (2, –1). Find its centroid. -Maths 9th

Last Answer : ABCD is a parallelogram, if the mid-points of diagonals AC and BD have the same co-ordinates (∵ Diagonals of a parallelogram bisect each other)Co-ordinates of mid-point of AC are \(\bigg(rac{a+2}{2},rac{-11+15}{2}\bigg)\) = \(\bigg(rac ... \(rac{a+2}{2}\) = 3 and 2 = \(rac{b+1}{2}\) ⇒ a = 4, b = 3.

If the co-ordinates of the mid-points of the sides of a triangle are (1, 1), (2, –3), (3, 4), find its incentre. -Maths 9th

Description : If the co-ordinates of the mid-points of the sides of a triangle are (1, 1), (2, –3), (3, 4), find its incentre. -Maths 9th

Last Answer : (b) 3 : 2 ; m = \(-rac{2}{5}\)Let P(m, 6) divides AB in the ratio k : 1. Then co-ordinates of P are \(\bigg(\)\(rac{2k-4}{k+1}\), \(rac{8k+3}{k+1}\)\(\bigg)\)Given, co-ordinates of P are (m, 6) ⇒\(rac{2k-4}{k+1} ... 2}-4}{rac{3}{2}+1}\) = \(rac{3-4}{rac{5}{2}}\) = \(rac{-2}{5}\)∴ m = \(rac{-2}{5}\).

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

Co-current absorbers are usually used when the gas to be dissolved in the liquid is (A) Sparingly soluble (B) Highly soluble (C) A pure substance (D) A mixture

Description : Co-current absorbers are usually used when the gas to be dissolved in the liquid is (A) Sparingly soluble (B) Highly soluble (C) A pure substance (D) A mixture

Last Answer : (C) A pure substance

When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Description : When the gas to be dissolved in liquid is a/an __________ then normally co-current adsorber are used. (A) Mixture of two gases (B) Pure gas (C) Ideal gas (D) Sparingly soluble gas

Last Answer : (B) Pure gas

Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Description : Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Last Answer : (A) Escaping tendencies of the same substance in different phases of a system

In facsimile transmission, a page is scanned and converted into a sequence of a. Binary sequence b. Ternary sequence c. black or white pixels d. alphanumeric sequence

Description : In facsimile transmission, a page is scanned and converted into a sequence of a. Binary sequence b. Ternary sequence c. black or white pixels d. alphanumeric sequence

Last Answer : c. black or white pixels

What is a relationship called when it is maintained between two entities? (A) Unary (B) Binary (C) Ternary (D) Quaternary

Description : What is a relationship called when it is maintained between two entities? (A) Unary (B) Binary (C) Ternary (D) Quaternary

Last Answer : (B) Binary

Cartesian product in relational algebra is (A) a Unary operator. (B) a Binary operator. (C) a Ternary operator. (D) not defined.

Description : Cartesian product in relational algebra is (A) a Unary operator. (B) a Binary operator. (C) a Ternary operator. (D) not defined.

Last Answer : (B) a Binary operator.

For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Description : For a binary mixture with low relative volatility, continuous rectification to get pure products will require (A) Low reflux ratio (B) Less number of trays (C) Small cross-section column (D) High reflux ratio

Last Answer : (D) High reflux ratio

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

For a single component absorber, the operating line is straight only when plotted in term of __________ units. (A) Partial pressure (B) Mole ratio (C) Mole fraction (D) None of these

Description : For a single component absorber, the operating line is straight only when plotted in term of __________ units. (A) Partial pressure (B) Mole ratio (C) Mole fraction (D) None of these

Last Answer : (B) Mole ratio

The base of a right triangular prism is an equilateral triangle. If the height is halved and each side of the base is doubled, find the ratio of the -Maths 9th

Description : The base of a right triangular prism is an equilateral triangle. If the height is halved and each side of the base is doubled, find the ratio of the -Maths 9th

Last Answer : 1 : 2 Let each side of the base of the original prism be a units and the height of the prism be h units. Then Required ratio = Vol. of original prismVol. of new prismVol. of original ... )2×h3√4×(2a)2×h234×(a)2×h34×(2a)2×h2 = 2a2h4a2h2a2h4a2h = 1 : 2.

The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Description : The diffusivity, DAB (for component A diffusing in B) is equal to the diffusivity DBA (for component B diffusing in A) for a binary mixture of (A) Newtonian liquids (B) Non-Newtonian liquids (C) Ideal gases (D) Real gases

Last Answer : (C) Ideal gases

Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed as the ratio of the concentration gradient at wall to the overall concentration difference (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2 (D) The z-component of the total mass flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Description : Pick out the wrong statement. (A) The Reynolds analogy for mass transfer is given by Lewis relation and is applicable, when Schmidt number is one (B) Sherwood number for flow in pipes can be expressed ... flux of a component A in binary mixture of A and B is given by - Dab'.dCA/dz

Last Answer : (C) According to film theory for equimolar counter diffusion, the mass transfer coefficient is given by DAB(B)P - 3, Q - 2

The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Description : The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Last Answer : (B) T and P

The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the following plots is correct if x and m represent t

Description : The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the following plots is correct if x and m represent t

Last Answer : The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the ... Represents extrapolated data) A. B. C. D.

What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Description : What is the number of degree of freedom for a system of two miscible non-reacting species in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 2 (C) 1 (D) 3

Last Answer : (C) 1

When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of component B (B) Vapour pressure of component A to the total pressure (C) Vapour pressure of component A to the partial pressure of A (D) Partial pressure of component A to the total pressure

Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure

Last Answer : (A) Vapour pressure of component A to that of component B

What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 1 (C) 2 (D) 3

Description : What is the degree of freedom for two miscible (non-reacting) substances in vapor-liquid equilibrium forming an azeotrope? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

Compressibility factor-reduced pressure plot on reduced co-ordinates facilitates (A) Use of only one graph for all gases (B) Covering of wide range (C) Easier plotting (D) More accurate plotting

Description : Compressibility factor-reduced pressure plot on reduced co-ordinates facilitates (A) Use of only one graph for all gases (B) Covering of wide range (C) Easier plotting (D) More accurate plotting

Last Answer : A) Use of only one graph for all gases

Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems

Description : Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems

Last Answer : (A) Separation of a binary mixture by distillation

Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Description : Any convenient co-ordinate system or Cartesian co-ordinates which can be usedto define the picture is called a.spherical co-ordinates b.vector co-ordinates c.viewport co-ordinates d.world co-ordinates

Last Answer : d.world co-ordinates

The theoretical minimum work required to separate one mole of a liquid mixture at 1 atm, containing 50 mole % each of n- heptane and n octane into pure compounds each at 1 atm is (A) -2 RT ln 0.5 (B) -RT ln 0.5 (C) 0.5 RT (D) 2 RT

Description : The theoretical minimum work required to separate one mole of a liquid mixture at 1 atm, containing 50 mole % each of n- heptane and n octane into pure compounds each at 1 atm is (A) -2 RT ln 0.5 (B) -RT ln 0.5 (C) 0.5 RT (D) 2 RT

Last Answer : (B) -RT ln 0.5

Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of a component is equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas

Description : Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of ... equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas

Last Answer : (D) The fugacity co-efficient is zero for an ideal gas

The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Description : The lower horizontal line of the refrigeration cycle plotted on pressure-enthalpy-diagram represents (a) condensation of the refrigerant vapour (b) evaporation of the refrigerant liquid (c) compression of the refrigerant vapour (d) metering of the refrigerant liquid

Last Answer : Ans: b

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Co-ordinates are ranging according to the screen resolution. a.TRUE b.FALSE c. d.

Description : Co-ordinates are ranging according to the screen resolution. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Description : Draw the graph of the equation 3x + 4y = 12 and find the co-ordinates of the points of intersection of the equation with the co-ordinate axes. -Maths 9th

Last Answer : Solution :-

What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Description : What do you mean by Co-ordinates (Abscissa and Ordinate)? Explain with figure. -Maths 9th

Last Answer : Co-ordinate Geometry is that branch of geometry in which two numbers, called co-ordinates are used to indicate the position of a point in a plane and which make use of algebraic methods in the study of geometric figures.

Distance Formula for co-ordinates: -Maths 9th

Description : Distance Formula for co-ordinates: -Maths 9th

Last Answer : The position of each point of the plane is determined with reference to the rectangular axes by means of a pair of numbers called co-ordinates which are distances of the point from the respective axes. The distance of the ... are (x, 0) and the co-ordinates of any point of the y-axis are (0, y)

Section formula for co-ordinates: -Maths 9th

Description : Section formula for co-ordinates: -Maths 9th

Last Answer : The co-ordinate axes separate the plane into four regions called the quadrants. By custom the quadrants are numbered I, II, III, IV, in the counter clockwise direction as shown in the figure. (i) For distances along the x- ... +)X′OY′3rd quadrantx < 0, y < 0(-, -)XOY′4th quadrantx > 0, y < 0(+, -)

Find the co-ordinates of the points on the x-axis which are at a distance of 10 units from the point (– 4, 8)? -Maths 9th

Description : Find the co-ordinates of the points on the x-axis which are at a distance of 10 units from the point (– 4, 8)? -Maths 9th

Last Answer : (a) Internal division: If P(x, y) divides the line segment formed by the joining of the points A (x1, y1) and B (x2, y2) internally in the ratio m1 : m2. Then\(x=rac{m_1x_2+m_2x_1}{m_1+m_2}\) and \(y=rac ... : 1, the co-ordinates of the mid-point are \(\bigg(rac{x_1+x_2}{2},rac{y_1+y_2}{2}\bigg)\).

Find the co-ordinates of the circumcentre of the triangle whose vertices are (3, 0), (–1, –6) and (4, –1). Also find its circum-radius. -Maths 9th

Description : Find the co-ordinates of the circumcentre of the triangle whose vertices are (3, 0), (–1, –6) and (4, –1). Also find its circum-radius. -Maths 9th

Last Answer : Let A ≡ (2, - 2), B ≡ (-2, 1), C ≡ (5, 2 ). Then,AB = \(\sqrt{(-2-2)^2+(1+2)^2}\) = \(\sqrt{16+9}\) = \(\sqrt{25}\) = 5BC = \(\sqrt{(5+2)^2+(2-1)^2}\) = \(\sqrt{49+1}\) = \(\sqrt{50}\) = \( ... of ΔABC = \(rac{1}{2}\) x base x height = \(rac{1}{2}\) x AB x AC = \(rac{1}{2}\)x 5 x 5 = 12.5 sq. units.

Let the opposite angular points of a square be (3, 4) and (1, – 1), Find the co-ordinates of the remaining angular points. -Maths 9th

Description : Let the opposite angular points of a square be (3, 4) and (1, – 1), Find the co-ordinates of the remaining angular points. -Maths 9th

Last Answer : P ≡ (-3, 2), Q ≡ (-5, -5), R ≡ (2, -3), S ≡ (4, 4)∴ PQ = \(\sqrt{(-5+3)^2+(-5-2)^2}\) = \(\sqrt{4+49}\) = \(\sqrt{53}\)QR = \(\sqrt{(2+5)^2+(-3+5)^2}\) = \(\sqrt{49+4}\) = \ ... of rhombus = \(rac{1}{2}\) x (Product of length of diagonals) = \(rac{1}{2}\) x \(5\sqrt2\) x \(9\sqrt2\) = 45 sq. units.

In the adjoining figure, P and Q have co-ordinates (4, 6)and (0, 3) respectively. Find (i) the co-ordinates of R (ii) Area of quadrilateral OAPQ. -Maths 9th

Description : In the adjoining figure, P and Q have co-ordinates (4, 6)and (0, 3) respectively. Find (i) the co-ordinates of R (ii) Area of quadrilateral OAPQ. -Maths 9th

Last Answer : Let the line 2x + 3y - 30 = 0 divide the join of A(3, 4) and B(7, 8) at point C(p, q) in the ratio k : 1. Then,p = \(rac{7k+3}{k+1}\), q = \(rac{8k+4}{k+1}\)As the point C lies on the line 2x + 3y - 30 ... {3}{2}+1},rac{8 imesrac{3}{2}+4}{rac{3}{2}+1}\bigg)\) = \(\big(rac{27}{5},rac{32}{5}\big)\).