Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Smoke point of a test sample of kerosene is found to be 15 mm. On
removal of __________ from it, the smoke point rises to 25 mm.
(A) n-paraffins
(B) Olefins
(C) Aromatics
(D) None of these
by

1 Answer

Answer :

(C) Aromatics
by

Related questions

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Description : Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Last Answer : (B) High smoke point

Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Description : Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Last Answer : (C) n-paraffins

Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Description : Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Last Answer : (A) Aromatics

Which of the following has the highest octane number? (A) Aromatics(B) i-paraffins(C) Naphthenes(D) Olefins

Description : Which of the following has the highest octane number? (A) Aromatics (B) i-paraffins (C) Naphthenes (D) Olefins

Last Answer : (A) Aromatics

H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Description : H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Last Answer : (D) Naphthenes

Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Description : Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Last Answer : (A) Paraffins

Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Last Answer : (B) Naphthenes into aromatics

Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: b Explanation: For C.I. engines fuel most preferred are paraffins and for S.I. engines fuel most preferred are aromatics.

For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: a Explanation: For S.I. engines fuel most preferred are aromatics while for C.I. engines fuel most preferred are paraffins.

In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Description : In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Last Answer : Ans :d

Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Description : Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Last Answer : (C) 25

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Description : Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Last Answer : (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Last Answer : (B) Paraffins have lower smoke point than aromatics

Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Description : Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Last Answer : (B) 20-25

Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Description : Presence of aromatics in (A) Diesel increases its cetane number (B) Kerosene increases its smoke point (C) Petrol increases its octane number (D) All (A), (B) and (C)

Last Answer : (C) Petrol increases its octane number

Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel oils is higher than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins

Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins

Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Description : Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Last Answer : (A) Paraffins

Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity of the fuel at 15.5°C (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

Alkylation (A) Causes olefins to combine with each other(B) Causes olefins to combine with iso-paraffins(C) Converts iso-paraffin into olefin(D) Converts olefin into paraffin

Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin

Last Answer : (B) Causes olefins to combine with iso-paraffins

Petroleum (A) Is optically active (B) Constitutes mainly of olefins (C) Does not contain asphalt (D) Does not contain aromatics

Description : Petroleum (A) Is optically active (B) Constitutes mainly of olefins (C) Does not contain asphalt (D) Does not contain aromatics

Last Answer : (A) Is optically active

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Description : The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Last Answer : (A) Dehydrogenation of naphthenes

Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Description : Feedstock for polymerisation is (A) Naphtha (B) Cracked gases rich in C2 & C4 olefins (C) Low boiling aromatics (D) None of these

Last Answer : (B) Cracked gases rich in C2 & C4 olefins

Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Description : Coal tar (produced by high temperature carbonisation) is the main source of (A) Aromatic compounds (B) Aliphatic compounds (C) Paraffins (D) Olefins

Last Answer : (A) Aromatic compounds

Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane number than straight chain paraffins with same number of carbon atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Description : Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane ... atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Last Answer : (A) Octane number of i-octane is zero

Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Description : Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Last Answer : (B) Diolefins

Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Description : Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Last Answer : (A) Paraffins

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Smoke point of kerosene is the (A) Time after which smoking starts on burning (B) Temperature at which smoking starts (C) Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp (D) None of these

Description : Smoke point of kerosene is the (A) Time after which smoking starts on burning (B) Temperature at which smoking starts (C) Maximum height of flame (in mm) without causing smoking, when burnt in a standard lamp (D) None of these

Last Answer : (B) Temperature at which smoking starts

What is the difference between paraffins and olefins?

Description : What is the difference between paraffins and olefins?

Last Answer : Need answer

Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol

Description : Aromatics are desired constituents of (A) Lubricating oil (B) Diesel (C) Kerosene (D) Petrol

Last Answer : (D) Petrol

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index

Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Description : Paraffins are desirable in lubricating oil, as it has got high (A) Viscosity (B) Viscosity index (C) Smoke point (D) Pour poin

Last Answer : (C) Smoke point

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

__________ converts n-paraffins to i-paraffins. (A) Alkylation (B) Polymerisation (C) Isomerisation (D) None of these

Description : __________ converts n-paraffins to i-paraffins. (A) Alkylation (B) Polymerisation (C) Isomerisation (D) None of these

Last Answer : (C) Isomerisation

A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Description : A 600 mm square bearing plate settles by 15 mm in plate load test on a cohesion-less soil under an intensity of loading of 0.2 N/ram². The settlement of a prototype shallow footing 1 m square under the same intensity of ... (A) 15 mm (B) Between 15 mm and 25 mm (C) 25 mm (D) Greater than 25 mm

Last Answer : Answer: Option B

Smoke point of kerosene expresses its (A) Burning characteristics (B) Luminosity characteristics (C) Aromatic content directly (D) Lamp wick wetting characteristics

Description : Smoke point of kerosene expresses its (A) Burning characteristics (B) Luminosity characteristics (C) Aromatic content directly (D) Lamp wick wetting characteristics

Last Answer : (A) Burning characteristics

Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Description : Illuminating characteristics of kerosene is expressed by its (A) Smoke point (B) Aniline point (C) Luminosity number (D) Aromatic content

Last Answer : (C) Luminosity number

Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Description : Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Last Answer : (B) Improve its oxidation stability

The general formula of naphthenes is(A) CnH2n + 2(B) CnH2n-6(where, n ≥ 6)(C) CnHn-4(D) Same as that for olefins i.e. CnH2n

Description : The general formula of naphthenes is (A) CnH2n + 2 (B) CnH2n-6 (where, n ≥ 6) (C) CnHn-4 (D) Same as that for olefins i.e. CnH2n

Last Answer : (B) CnH2n-6 (where, n ≥ 6)

Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Description : Mercapsol and Unisol processes are meant for the (A) Dearomatization of kerosene (B) Removal of mercaptans (C) Dewaxing

Last Answer : (B) Removal of mercaptan

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Last Answer : (A) 25-80