True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these

True boiling point apparatus is used for the
(A) Determination of characterisation factor
(B) Evaluation of oil stocks
(C) Determination of true vapour pressure
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel apparatus is used for determining flash points below 50°C (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is(A) Paraffinic(B) Naphthenic(C) Intermediate(D) None of these

Description : The characterisation factor of a crude oil is calculated as 12.5. It meansthat; it is (A) Paraffinic (B) Naphthenic (C) Intermediate (D) None of these

Last Answer : (A) Paraffinic

The characterisation factor of crude petroleum oil is around (A) 3 (B) 11 (C) 22 (D) 28

Description : The characterisation factor of crude petroleum oil is around (A) 3 (B) 11 (C) 22 (D) 28

Last Answer : (B) 11

On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Description : On addition of solute in the solvent, the __________ of the solution decreases. (A) Boiling point (B) Freezing point (C) Vapour pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Description : Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Last Answer : (C) High vapour pressure

In the following list of the aspects of the guidance of learning activities, which is the most fundamental and should occur first from the stand point of time? Options: A) Determination of methods of evaluation B) Determination of methods of presentation C) Determination of objectives D) Selection of the learning activities

Description : In the following list of the aspects of the guidance of learning activities, which is the most fundamental and should occur first from the stand point of time? Options: A) ... Determination of methods of presentation C) Determination of objectives D) Selection of the learning activities

Last Answer : C) Determination of objectives 

Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these

Description : Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these

Last Answer : (D) None of these

At boiling point of liquids, its : (1) Temperature increases (2) Atmospheric pressure increases (3) Timperature remains increases (4) Vapour pressure decreases

Description : At boiling point of liquids, its : (1) Temperature increases (2) Atmospheric pressure increases (3) Timperature remains increases (4) Vapour pressure decreases

Last Answer : (3) Timperature remains increases

In the pressure cooker, cooking is faster because the increase in vapour pressure - (1) increase the specific heat (2) decreases the specific heat (3) decreases the boiling point (4) increases the boiling point

Description : In the pressure cooker, cooking is faster because the increase in vapour pressure - (1) increase the specific heat (2) decreases the specific heat (3) decreases the boiling point (4) increases the boiling point

Last Answer : (4) increases the boiling point

At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Description : At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Last Answer : (3) Temperature remains constant Explanation: An interesting property of matter is that its temperature remains constant during a phase change, assuming its surrounding pressure is constant. A liquid changes into gaseous state at a constant temperature called its boiling point.

At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Description : At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases 

Last Answer : Temperature remains constant

One of the most common physical tests performed on fats is a determination of the ____ point. a. boiling c. melting b. cooling d. separating

Description : One of the most common physical tests performed on fats is a determination of the ____ point. a. boiling c. melting b. cooling d. separating

Last Answer : c. melting

In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water

Description : In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water

Last Answer : (C) Characterisation of liquid effluents

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) Bubbles from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Description : In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) ... from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Last Answer : (B) Temperature of the heating surface is more than the boiling point of the liquid

During which step of the nursing process does the nurse analyze data related to the patient’s health status? a) Assessment Analysis of data is included as part of the assessment. b) Implementation Implementation is the actualization of the plan of care through nursing interventions. c) Diagnosis Diagnosis is the identification of patient problems. d) Evaluation Evaluation is the determination of the patient’s responses to the nursing interventions and the extent to which the outcomes have been achieved.

Description : During which step of the nursing process does the nurse analyze data related to the patient's health status? a) Assessment Analysis of data is included as part of the assessment. b) ... patient's responses to the nursing interventions and the extent to which the outcomes have been achieved.

Last Answer : a) Assessment Analysis of data is included as part of the assessment.

Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Description : Higher viscosity of lubricating oil usually signifies (A) Lower Reid vapour pressure (B) Higher acid number (C) Higher flash point and fire point (D) Lower flash point and fire point

Last Answer : (C) Higher flash point and fire point

Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Description : Flash point of an oil is determined by the (A) Pensky Martens apparatus (B) Ramsbottom apparatus (C) Saybolt viscometer (D) Conradson apparatus

Last Answer : (A) Pensky Martens apparatus

Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Description : Boiling range of motor gasoline is an indication of the (A) Case of starting (B) Rate of acceleration (C) Vapour locking tendency (D) All (A), (B) and (C)

Last Answer : (B) Rate of acceleration

When vaporisation takes place directly at the heating surface, it is called (A) Film boiling (B) Nucleate boiling (C) Vapour binding (D) None of these

Description : When vaporisation takes place directly at the heating surface, it is called (A) Film boiling (B) Nucleate boiling (C) Vapour binding (D) None of these

Last Answer : (B) Nucleate boiling

Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation temperature of the liquid (C) Heat transfer from the surface of the liquid is less than that in film boiling (D) The temperature is less than that of film boiling

Description : Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation ... less than that in film boiling (D) The temperature is less than that of film boiling

Last Answer : (D) The temperature is less than that of film boiling

The burnout heat flux in the nucleate boiling regime is not a function of the (A) Liquid density (B) Vapour density (C) Temperature difference (D) Heat of evaporation

Description : The burnout heat flux in the nucleate boiling regime is not a function of the (A) Liquid density (B) Vapour density (C) Temperature difference (D) Heat of evaporation

Last Answer : (B) Vapour density

Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces(B) A hydrometer used for the determination of specific gravities of liquidsworks on the principle of buoyant forces(C) In case of unsteady fluid flow, the velocity at any given point does notchange with time(D) Turbulent fluid flow is characterised by the rapid fluctuation ofinstantaneous pressure & velocity at a poin

Description : Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces (B) A hydrometer used for the determination of ... Turbulent fluid flow is characterised by the rapid fluctuation of instantaneous pressure & velocity at a poin

Last Answer : (C) In case of unsteady fluid flow, the velocity at any given point does not change with time

Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of a system decreases with the evolution of heat (C) Change of internal energy is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Description : Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Last Answer : (A) Nature of boiling point diagram of the system

Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Description : Reid vapour pressure of gasoline is the measure of its (A) Pour point (B) Cloud point (C) Vapour locking tendency (D) Carbon residue

Last Answer : (C) Vapour locking tendency

Higher vapour pressure of gasoline indicates(A) Low flash point(B) High breathing loss(C) Both (A) and (B)(D) Neither (A) nor (B

Description : Higher vapour pressure of gasoline indicates (A) Low flash point (B) High breathing loss (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (D) Neither (A) nor (B

Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Description : Dew point of a gas-vapour mixture (A) Increases with temperature rise (B) Decreases with temperature rise (C) Decreases with decrease in pressure (D) Increases with increase in pressure

Last Answer : (C) Decreases with decrease in pressure

Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Description : Which of the following is an undesirable property for an absorbingsolvent? (A) Low vapour pressure (B) Low velocity (C) Low freezing point (D) None of these

Last Answer : (D) None of these

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew point temperature of air has not reached (C) Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Description : When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew ... Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Last Answer : (D) Air is fully saturated

True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Description : True vapour pressure of a petroleum fraction __________ Reid vapour pressure. (A) Is less than (B) Is more than (C) Is same as (D) May be either more or less than

Last Answer : (D) May be either more or less than

Describe the procedure for determination of workability by compaction factor method.

Description : Describe the procedure for determination of workability by compaction factor method.

Last Answer : Procedure for determination of workability by compaction factor method: The procedure of determining the workability of concrete using compaction factor as per IS: 1199-1959 is as follows. 1. Take the freshly ... upon calculated C.F., the degree of workability can be designated as follows. 

__________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Description : __________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Last Answer : (B) Viscosity

Test specimen for determination of refractoriness under load (RUL) of a refractory is heated in a (A) Furnace employing neutral atmosphere (B) Carbon resistance furnace (C) Reducing atmosphere (D) Furnace employing negative pressure

Description : Test specimen for determination of refractoriness under load (RUL) of a refractory is heated in a (A) Furnace employing neutral atmosphere (B) Carbon resistance furnace (C) Reducing atmosphere (D) Furnace employing negative pressure

Last Answer : (B) Carbon resistance furnace

What is the Boiling point of baby oil?

Description : What is the Boiling point of baby oil?

Last Answer : Feel Free to Answer

Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling

Description : Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling

Last Answer : Ans: C

Which of the following is not a desirable property of a refrigerant (a) highmisibility with oil (b) low boiling point (c) good electrical conductor (d) large latent heat

Description : Which of the following is not a desirable property of a refrigerant (a) highmisibility with oil (b) low boiling point (c) good electrical conductor (d) large latent heat

Last Answer : Ans: c

Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

LMTD can't be used as such without a correction factor for the (A) Multipass heat exchanger (B) Baffled heat exchanger (C) Condensation of mixed vapour in a condenser (D) All (A) (B) and (C)

Description : LMTD can't be used as such without a correction factor for the (A) Multipass heat exchanger (B) Baffled heat exchanger (C) Condensation of mixed vapour in a condenser (D) All (A) (B) and (C)

Last Answer : (D) All (A) (B) and (C)

A: Atrial naturiuretic factor is released by wall of atria. R: It inhibits the release of renin from juxta glomerular apparatus.

Description : A: Atrial naturiuretic factor is released by wall of atria. R: It inhibits the release of renin from juxta glomerular apparatus.

Last Answer : A: Atrial naturiuretic factor is released by wall of atria. R: It inhibits the release of renin ... false D. If both Assertion and Reason are false

Boiling point diagram is not affected by the ambient (A) Pressure (B) Humidity (C) Temperature (D) Both (B) and (C)

Description : Boiling point diagram is not affected by the ambient (A) Pressure (B) Humidity (C) Temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Nitrobenzene (boiling point = 210.6°C) is steam distilled at 1 atm pressure. Nitrobenzene will distil off __________ °C. (A) At < 100 (B) At > 210.6 (C) Between 100 and 210 (D) None of these

Description : Nitrobenzene (boiling point = 210.6°C) is steam distilled at 1 atm pressure. Nitrobenzene will distil off __________ °C. (A) At < 100 (B) At > 210.6 (C) Between 100 and 210 (D) None of these

Last Answer : (A) At < 100

At the boiling point of the liquid at the prevailing pressure, the saturated absolute humidity becomes (A) 1 (B) 0 (C) ∞ (D) None of these

Description : At the boiling point of the liquid at the prevailing pressure, the saturated absolute humidity becomes (A) 1 (B) 0 (C) ∞ (D) None of these

Last Answer : (C) ∞

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Boiling point elevation of a solution of NaOH (A) Increases rapidly with temperature rise (B) Is almost independent of temperature (C) Is almost independent of pressure (D) Both (B) and (C)

Description : Boiling point elevation of a solution of NaOH (A) Increases rapidly with temperature rise (B) Is almost independent of temperature (C) Is almost independent of pressure (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)