Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index
Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index
Description : Highest quality bitumen is produced from the __________ crude oil. (A) Paraffinic (B) Naphthenic (C) Intermediate (D) Mixed
Last Answer : (B) Naphthenic
Description : Crude oil produced by Indian oil fields are predominantly __________ in nature. (A) Paraffinic (B) Naphthenic (C) Asphaltic (D) Mixed base
Last Answer : (C) Asphaltic
Description : __________ base crude oil is also called asphaltic crude. (A) Paraffinic (B) Naphthenic (C) Mixed (D) Aromatic
Description : The characterisation factor of crude petroleum oil is around (A) 3 (B) 11 (C) 22 (D) 28
Last Answer : (B) 11
Description : . Pick out the wrong statement. (A) Multigrade lubricating oils have high viscosity index (B) Paraffinic oil has very high viscosity index (C) Naphthenic oil has very low viscosity index (D) High viscosity index means a large change in viscosity with change in temperature
Last Answer : (D) High viscosity index means a large change in viscosity with change in temperature
Description : Both asphalt and wax are produced by __________ base crude oils. (A) Naphthenic (B) Asphalt (C) Paraffin (D) Mixed
Last Answer : (C) Paraffin
Description : True boiling point apparatus is used for the (A) Determination of characterisation factor (B) Evaluation of oil stocks (C) Determination of true vapour pressure (D) None of these
Last Answer : (D) None of these
Description : In a refinery petroleum crude is fractionated into gas fraction, light ends, intermediate distillates, heavy distillates, residues and by products. The group of products including gas oil, diesel oil and ... the fraction (A) Heavy distillates (B) Intermediate distillates (C) Light ends (D) Residues
Last Answer : (A) Heavy distillates
Description : Pressure maintained in the high pressure primary tower of a three stage crude oil distillation system is about __________ kg/cm2 . (A) 1.5 (B) 3 (C) 6 (D) 12
Last Answer : (B) 3
Description : Naphtha yield in straight run distillation of crude oil may be about__________ percent. (A) 2 (B) 6 (C) 12 (D) 18
Last Answer : (B) 6
Description : In the context of the chemical process industries, the term BOD is normally associated with the (A) Characterisation of solid wastes (B) Organic concentration in gaseous effluents (C) Characterisation of liquid effluents (D) Characterisation of boiler feed water
Last Answer : (C) Characterisation of liquid effluents
Description : Naphthenic acid is represented by (A) CnH2n+2O2 (B) CnH2n-2O2 (C) CnH2n+2O2 (n ≥ 6) (D) CnH2n+6O2 (n ≤ 6)
Last Answer : (B) CnH2n-2O2
Description : Which of the following additives improves the cetane number of diesel? (A) Amyl nitrate (B) Ethyl mercaptan (C) Naphthenic acid (D) Tetra ethyl lead
Last Answer : (B) Ethyl mercaptan
Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index
Last Answer : (C) Is highly paraffinic
Description : In solutizer sweetening process, solutizer solution used is (A) Methanol in Unisol process (B) Naphthenic acid in Mercapsol process (C) Both (A) and (B)
Last Answer : (C) Both (A) and (B)
Description : Specific gravity of a petroleum product gives an indication of its (A) Degree of refinement (B) Hydrocarbon content type (aromatic or paraffinic) (C) Ease of atomisation (D) Sulphur content
Last Answer : (B) Hydrocarbon content type (aromatic or paraffinic)
Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid
Last Answer : (A) Aromatics
Description : Naphthenic acid is a/an __________ compound. (A) Sulphur (B) Nitrogen (C) Oxygen (D) None of these
Last Answer : (C) Oxygen
Description : High aniline point of a petrofuel (say diesel) indicates that (A) It is highly aromatic in nature (B) It is highly paraffinic in nature (C) It has a very low diesel index (D) Its ignition quality is very poor
Last Answer : (B) It is highly paraffinic in nature
Description : Calorific value of (A) Light paraffinic fuel oils is equal to that of equivalent olefins (B) n-paraffin is lower than that of iso-paraffins of the same compounds (C) Light paraffinic fuel ... than that of equivalent olefins (D) Light paraffinic fuel oils is lower than that of equivalent olefins
Last Answer : (C) Light paraffinic fuel oils is higher than that of equivalent olefins
Description : The yield of straight run LPG from crude oil is about __________ weight percent. (A) 20-25 (B) 1-1.5 (C) 10-15 (D) 0.1-0.2
Last Answer : (B) 1-1.5
Description : Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C
Last Answer : (A) 6.5 kgf/Cm2 & 95°C
Description : Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25
Last Answer : (D) 25
Description : Removal of light fractions from crude oil is called its (A) Sweetening (B) Dehydration (C) Stabilisation (D) Visbreaking
Last Answer : (C) Stabilisation
Description : Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum
Last Answer : (A) Reduced crude
Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these
Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose
Description : Which of the following fractions of a crude oil will have the maximum gravity API (i.e. °API)? (A) Diesel (B) Gasoline (C) Atmospheric gas oil (D) Vacuum gas oil
Last Answer : (C) Atmospheric gas oil
Description : Crude petroleum oil is a __________ fuel. (A) Primary (B) Fossil (C) Both (A) & (B) (D) Secondary
Last Answer : (C) Both (A) & (B)
Description : Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal
Last Answer : (B) Centrifugal
Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil
Last Answer : (A) Higher yield of straight run gasoline
Description : Percentage of straight run gasoline in a typical crude oil may be around (A) 6 (B) 18 (C) 38 (D) 52
Last Answer : (D) 52
Description : The pressure (kg/cm2 ) and temperature (°C) maintained in electrical desalters for crude oil are respectively (A) 10 and 120 (B) 1 and 200 (C) 50 and 250 (D) 10 and 300
Last Answer : (B) 1 and 200
Description : A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. (A) 4 (B) 10 (C) 18 (D) 26
Last Answer : (B) 10
Description : Crude oil is transported inland from oil field to refineries, mainly by the (A) Road tankers (B) Rail tankers (C) Underground pipelines (D) None of these
Last Answer : (C) Underground pipelines
Description : Feed for reforming is generally (A) Naphtha or straight run gasoline (B) Reduced crude (C) Vacuum gas oil
Last Answer : (A) Naphtha or straight run gasoline
Description : Which of the following theories of origin of petroleum does not explain the presence of nitrogen & sulphur compounds in crude oil? (A) Modern theory (B) Carbide theory (C) Engler theory (D) All (A), (B) and (C
Last Answer : (B) Carbide theory
Description : Products drawn from the top to bottom of the crude oil distillation column has progressively increasing (A) Boiling points (B) Molecular weight (C) C/H ratio (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. (A) 8 (B) 18 (C) 28 (D) 35
Last Answer : (A) 8
Description : Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B
Last Answer : (B) Oleophobic
Description : Clay treatment is used to remove (A) Salt from the crude oil (B) Colour & dissolved gases from cracked gasoline (C) Wax from lube oil (D) None of these
Last Answer : (C) Wax from lube oi
Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly
Last Answer : (B) Increases
Description : The conductivity of crude oil-water mixture depends on the (A) pH value (B) Water percentage (C) Temperature (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : Salt content (measured as sodium chloride) in electrically desalted crude oil comes down to a level of about __________ ptb (pounds per thousand barrel). (A) 0.03 (B) 3 (C) 35 (D) 70
Description : Natural gas recovered along with crude oil from oil wells is called wet natural gas which has a higher __________ compared to the dry natural gas. (A) Unsaturated hydrocarbon content (B) Calorific value (C) Quantity of propane (D) Quantity of butane
Last Answer : (B) Calorific value
Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro
Last Answer : (A) Gives higher yield of petrol
Description : The best method of determining sulphur in crude oil is by the __________ method. (A) Kjeldahl (B) Dumas (C) Bomb calorimeter (D) Junkers calorimeter
Last Answer : (C) Bomb calorimeter
Description : The first crude oil refinery of India is located at (A) Naharkatiya (B) Digboi (C) Kochi (D) Madras
Last Answer : (B) Digboi
Description : Light oil whose major component is Benzol, is obtained by the distillation of crude tar in the temperature range of __________ °C. (A) 80-170 (B) 200-300 (C) 250-270
Last Answer : (A) 80-170
Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil
Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point