Identify Kinematic pairs and named it. Refer Fig. No. 1

Identify Kinematic pairs and named it. Refer Fig. No. 1

image

by

1 Answer

Answer :

1) Link 1 and 2 -- Sliding Pair

2) Link 2 and 3 -- Turning Pair

3) Link 3 and 4 -- Turning Pair

4) Link 4 and 1 -- Sliding pair
by

Related questions

Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Description : Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Last Answer : b. 2800kg

Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Description : Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Last Answer : c. 25,000ft & 435kt

Refer to CAP697 MRJT1 Fig. 4.3.1 Given: Estimated zero fuel mass 50t; estimated landing mass at destination 52t; final reserve fuel 2t; alternate fuel 1t; flight to destination distance 720nm, true course 030, W/V 340/30; cruise: LRC, at FL330 outside air temperature -30C. Find estimated trip fuel and time. a. 4,800kg / 01hr 45min b. 4,400kg / 02hr 02min c. 4,750kg / 02hr 00min d. 4,600kg / 02hr 05min

Description : Refer to CAP697 MRJT1 Fig. 4.3.1 Given: Estimated zero fuel mass 50t; estimated landing mass at destination 52t; final reserve fuel 2t; alternate fuel 1t; flight to destination distance 720nm, true course 030, W/V ... b. 4,400kg / 02hr 02min c. 4,750kg / 02hr 00min d. 4,600kg / 02hr 05min

Last Answer : a. 4,800kg / 01hr 45min

Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Description : Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Last Answer : b. 2800kg

Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Description : Refer to CAP697 MRJT1 Fig. 4.2 & 4.5.3.2 Estimated take-off mass 57,000kg; ground distance 150nm; temperature ISA -10C; cruise at M0.74. What is the optimum cruise altitude and TAS? a. 25,000ft & 445kt b. 33,000ft & 420kt c. 25,000ft & 435kt d. 33,000ft & 430kt

Last Answer : c. 25,000ft & 435kt

Of the four traditional roles of an artist as cited in your textbook, specifically identify which of those traditional roles was the most important for Warhol in creating the artwork depicted in Fig. 1-29, page 27 Explain why you chose that role?

Description : Of the four traditional roles of an artist as cited in your textbook, specifically identify which of those traditional roles was the most important for Warhol in creating the artwork depicted in Fig. 1-29, page 27 Explain why you chose that role?

Last Answer : When Warhol was creating the artwork they were using the role a visual record of the people, places, and events of their time and place. I wouldn't say any of the other roles really hit ... . This role was important for Warhol due to capturing the events that actually went down during these times.

12. Kinematic viscosity is the product of dynamic viscosity and the density of the liquid. A) Yes B) No

Description : 12. Kinematic viscosity is the product of dynamic viscosity and the density of the liquid. A) Yes B) No

Last Answer : B

The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Description : The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Last Answer : (C) Kinematic viscosity

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Description : Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Last Answer : (A) Kinematic viscosity

The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Last Answer : (B) Prandtl

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

. One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Last Answer : (A) 1 cm2 /second

Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Description : Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Last Answer : (B) Kinematic viscosity

Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Description : Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Last Answer : (D) None of these

N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Last Answer : (A) The S.I. unit of dynamic viscosity

The dimension of kinematic viscosity is(A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these

Description : The dimension of kinematic viscosity is (A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these

Last Answer : (B) L 2T -1

The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Description : The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Last Answer : (D) 0.44

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Scale up of agitator design requires (A) Geometrical similarity only (B) Dynamic similarity only (C) Both geometrical and dynamic similarity (D) All geometrical, dynamic and kinematic similarity

Description : Scale up of agitator design requires (A) Geometrical similarity only (B) Dynamic similarity only (C) Both geometrical and dynamic similarity (D) All geometrical, dynamic and kinematic similarity

Last Answer : (D) All geometrical, dynamic and kinematic similarity

Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Last Answer : (C) Kinematic viscosity

The degree of kinematic indeterminacy of a pin-jointed space frame is (A) 2j - r(B) 3j - r(C) j - 2r(D) j - 3rWhere j is number of joints and r is reaction components

Description : The degree of kinematic indeterminacy of a pin-jointed space frame is (A) 2j - r (B) 3j - r (C) j - 2r (D) j - 3r Where j is number of joints and r is reaction components

Last Answer : (B) 3j - r

Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Description : Degree of kinematic indeterminacy of a pin-jointed plane frame is given by (A) 2j - r (B) j - 2r (C) 3j - r (D) 2j + r

Last Answer : (A) 2j - r

Frictional force encountered after commencement of motion is called (A) Post friction (B) Limiting friction (C) Kinematic friction (D) Dynamic friction

Description : Frictional force encountered after commencement of motion is called  (A) Post friction  (B) Limiting friction  (C) Kinematic friction  (D) Dynamic friction 

Last Answer : (D) Dynamic friction 

The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of (A) Friction (B) Limiting friction (C) Repose (D) Kinematic friction

Description : The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of (A) Friction (B) Limiting friction (C) Repose (D) Kinematic friction

Last Answer : (C) Repose

The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction

Description : The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction

Last Answer : (A) Limiting friction

The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Last Answer : (D) None of these

Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Description : Pick out the wrong conversion of absolute & kinematic viscosities. (A) 1 stoke = 1 cm2/sec (B) 1 N.sec/m2 = 10 paise (C) 1 stoke = 1 m2/sec (D) 1 m2/sec = 104 stokes

Last Answer : (C) 1 stoke = 1 m2/sec

The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Last Answer : (B) Water

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Last Answer : Answer: Option C

Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow

Description : Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow

Last Answer : Answer: Option C

Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday

Description : Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday

Last Answer : Answer: Option C

Kinematic viscosity is equal to (A) Dynamic viscosity/density (B) Dynamic viscosity × density (C) Density/dynamic viscosity (D) 1/dynamic viscosity × density

Description : Kinematic viscosity is equal to (A) Dynamic viscosity/density (B) Dynamic viscosity × density (C) Density/dynamic viscosity (D) 1/dynamic viscosity × density

Last Answer : Answer: Option A

The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Description : The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Last Answer : Answer: Option A

Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Description : Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Last Answer : Answer: Option B

The kinematic viscosity is the (A) Ratio of absolute viscosity to the density of the liquid (B) Ratio of density of the liquid to the absolute viscosity (C) Product of absolute viscosity and density of the liquid (D) Product of absolute viscosity and mass of the liquid

Description : The kinematic viscosity is the (A) Ratio of absolute viscosity to the density of the liquid (B) Ratio of density of the liquid to the absolute viscosity (C) Product of absolute viscosity and density of the liquid (D) Product of absolute viscosity and mass of the liquid

Last Answer : Answer: Option A

The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity

Description : The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity

Last Answer : Answer: Option C

The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Description : The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Last Answer : Answer: Option A

Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units

Description : Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units

Last Answer : Answer: Option A

What Is Kinematic Viscosity?

Description : What Is Kinematic Viscosity?

Last Answer : The kinematic viscosity is the ratio of absolute viscosity to the density of the liquid.

The kinematic part of the robot or manipulator is called __________.  1. Links  2. Joints  3. End-effectors  4. None of the above

Description : The kinematic part of the robot or manipulator is called __________.  1. Links  2. Joints  3. End-effectors  4. None of the above

Last Answer : 2

Terminal Hinge Axis can be obtained by: A. Face bow B. Kinematic face bow C. Articulator

Description : Terminal Hinge Axis can be obtained by: A. Face bow B. Kinematic face bow C. Articulator

Last Answer : B. Kinematic face bow

Kinematic index of the straw Walker is as ratio (a) Angular velocity of straw Walker to angular velocity of threshing drum (b) Angular velocity of straw Walker to angular velocity of threshing drum (c) Angular velocity of straw Walker to linear velocity of combine (d) All of the above

Description : Kinematic index of the straw Walker is as ratio (a) Angular velocity of straw Walker to angular velocity of threshing drum (b) Angular velocity of straw Walker to angular velocity of threshing drum (c) Angular velocity of straw Walker to linear velocity of combine (d) All of the above

Last Answer : (a) Angular velocity of straw Walker to angular velocity of threshing drum

Kinematic similarity between the model and prototype signifies similarities of a) Motion b) Force c) Length d) None of the above

Description : Kinematic similarity between the model and prototype signifies similarities of a) Motion b) Force c) Length d) None of the above

Last Answer : a) Motion

The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Description : The ratio of reel peripheral speed to forward speed of combine is called (a)velocity index (b)angular velocity index (c)reel speed index (d) kinematic index

Last Answer : (c)reel speed index

The ratio of real peripheral speed to forward speed of combine is called :- a) Velocity index b) Angular velocity index C) Reel speed index d) kinematic index

Description : The ratio of real peripheral speed to forward speed of combine is called :- a) Velocity index b) Angular velocity index C) Reel speed index d) kinematic index

Last Answer : C) Reel speed

Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Description : Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Last Answer : (i) Kinematic link: Each part of a machine, which moves relative to some other part, is known as a kinematic link.  (ii) Kinematic pair: The two links or elements of a machine, ... obtaining different mechanisms by fixing different links in a kinematic chain is known as inversion of the mechanism.