Description : Isochoric process is one in which (a) free expansion takes place (b) very little mechanical work is done by the system (c) no mechanical work is done by the system (d) all parameters remain constant
Last Answer : Answer : c
Description : The boiling of water into steam in an open container is an example of a/an _________ process. a. adiabatic b. isochoric c. isobaric d. zero work
Last Answer : isobaric
Description : 195.Which parameter remains constant in isochoric process ?
Last Answer : Volume.
Description : In __________ process, there is an increase in entropy with no degradation of energy. (A) Isothermal expansion (B) Isochoric heat addition (C) Polytropic expansion (D) Isobaric heat addition
Last Answer : (A) Isothermal expansion
Description : What is another term used for isometric processes? a. Isochoric process b. Iolytropic process c. Isothermal process d. Reversible process
Last Answer : Isochoric process
Description : Most cooking activities involve _________ process. a. Isochoric b. Isothermal c. Isobaric d. Isovolumic
Last Answer : Isobaric
Description : No volume changes occur during this type of process a. Isobaric process b. Isomillimetric process c. Isocaloric process d. Isochoric process
Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____. A. Isochoric process B. Isobaric process C. Throttling process D. Quasistatic process
Last Answer : Throttling process
Description : A process during which entropy remains constant is called ______ process A. Isometric B. Isochoric C. Isobaric D. Isentropic
Last Answer : Isentropic
Description : What is a process during which the specific volume remains constant? A. Isobaric process B. Isothermal process C. Isochoric or isometric process D. Isovolumetric process
Last Answer : Isochoric or isometric process
Description : What is a process during which the pressure remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isobaric process
Description : What is a process during which the temperature remains constant? A. Isobaric process B. Isothermal process C. Isochoric process D. Isometric process
Last Answer : Isothermal process
Description : A cycle tyre bursts suddenly. This represents an – (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process
Last Answer : (2) Adiabatic process Explanation: When a tyre bursts suddenly energy is not immediately transferred between the system and the surrounding. So the process is adiabatic. There sudden expansion of its air ... tyre is cooled. In adiabatic process, heat neither enters the system nor leaves the system.
Description : Name the state variables that remain constant in isobaric and isochoric process.
Last Answer : Ans. Pressure and Volume .
Description : Change of state namely evaporation condensation, freezing and melting is an __________ process. (A) Isothermal (B) Adiabatic (C) Isobaric (D) Isochoric
Last Answer : (A) Isothermal
Description : Heating of water under atmospheric pressure is an __________ process. (A) Isochoric (B) Isobaric (C) Adiabatic (D) Isothermal
Last Answer : (B) Isobaric
Description : An approximately __________ process exemplifies the flow of a gas through a very long pipe of uniform cross-section. (A) Adiabatic (B) Isothermal (C) Isentropic (D) Isochoric
Last Answer : (B) Isothermal
Description : A cycle tyre bursts suddenly. This represents an : (1) Isothermal process (2) Adiabatic process (3) Isochoric process (4) Isoboric process
Last Answer : Adiabatic process
Description : Draw P-V and T-S diagram for isochoric process.
Last Answer : Isochoric Process:
Description : Represent Isobaric, Isochoric, Isothermal, Adiabatic process on P-V and T-S diagram.
Last Answer : Isobaric process Isothermal process Isochoric process Adiabatic process:
Description : Represent Isochoric Process on P-V and T-S chart.
Last Answer : Figure: P-V and T-S representation of Isochoric process
Description : The propagation of sound waves in a gas involves – (1) Adiabatic compression and rarefaction (2) Isothermal compression and rarefaction (3) Isochoric compression and rarefaction (4) Isobaric compression and rarefaction
Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within the ... . Through solids, however, it can be transmitted as both longitudinal waves and transverse waves.
Last Answer : (1) Adiabatic compression and rarefaction Explanation: Sound is a mechanical wave that is an oscillation of pressure transmitted through a solid, liquid, or gas, composed of frequencies within ... is transmitted through gases, plasma, and liquids as longitudinal waves, also called compression waves.
Description : An assembler is a utility program that performs: a. Isometric translation b. Isomorphic translation c. Isochoric translation d. None of these
Last Answer : b. Isomorphic translation
Description : A Carnot cycle consists of the following steps: (A) Two isothermal and two isentropic (B) Two isobaric and two isothermal (C) Two isochoric and two isobaric (D) Two isothermals and two isochoric
Last Answer : A) Two isothermal and two isentropic
Description : The propagation of sound waves in a gas involves (1) adiabatic compression and rarefaction (2) isothermal compression and rarefaction (3) isochoric compression and rarefaction (4) isobaric compression and rarefaction
Last Answer : adiabatic compression and rarefaction
Description : What is polytropic process ? Under what conditions it approaches isobaric, isothermal, and isometric process ? In which reversible process no work is done ?
Last Answer : A polytropic process is one that follows the equation pun = constant (index n may have values from – oc to + oo. This process approaches isobaric when n = 0, isothermal when n = 1, and isometric when n = . No work is done in isometric process.
Description : Work done by a/an __________ process is determined by ∫p. dv (A) Adiabatic (B) Quasi-static (C) Isothermal (D) Isentropic
Last Answer : (B) Quasi-static
Description : Which of the following relations is not applicable in a free expansion process? a. Heat is rejected to zero b. Work done is zero c. Change in temperature is zero d. Heat supplied is zero
Last Answer : Change in temperature is zero
Description : During throttling process (a) heat exchange does not take place (b) no work is done by expanding steam (c) there is no change of internal energy of steam (d) all of the above (e) entropy decreases.
Last Answer : Answer : d
Description : If a system after undergoing a series of processes, returns to the initial state then (a) process is thermodynamically in equilibrium (b) process is executed in closed system cycle (c) its entropy will ... sum of heat and work transfer will be zero (e) no work will be done by the system.
Description : According to first law of thermodynamics (a) work done by a system is equal to heat transferred by the system (b) total internal energy of a system during a process remains constant ( ... , enthalpy and entropy during a process remain constant (d) total energy of a system remains constant
Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be (a) 300 Nm (b) 300,000 Nm (c) 30 Nm (d) 3000 Nm (e) 30,000 Nm.
Last Answer : Answer : b
Description : In a free expansion process (a) work done is zero (b) heat transfer is zero (c) both (a) and (b) above (d) work done is zero but heat increases (e) work done is zero but heat decreases.
Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about (a) 100 xlOO5 joules (b) lxlO5 joules (c) 10 xlO5 joules (d) 10 xlO5 kilo joules (e) 10xl04ki\ojoules.
Description : Work done is zero for the following process (a) constant volume (b) free expansion (c) throttling (d) all Of the above (e) none of the above.
Description : Work done in an adiabatic process between a given pair of end states depends on (a) the end states only (b) particular adiabatic process (c) the value of index n (d) the value of heattransferred (e) mass of the system.
Last Answer : Answer : a
Description : Work done in a free expansion process is (a) + ve (b) -ve (c) zero (d) maximum (e) minimum.
Description : In which layout manufacturing is done according to product's characteristics? a.Process layout b.GT layout c.Product layout d.Both A & B
Last Answer : d.Both A & B
Description : In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout
Last Answer : c.Process layout
Description : The value for the ΔU of a system is -120 J. If the system is known to have absorbed 420 J of heat, how much work was done? a. -540 J b. -640 J c. -740 J d. -840 J formula: ΔU = q +w
Last Answer : -540 J
Description : The law of conservation of mechanical energy is valid a.Irrespective of the nature of force field b.Only in gravitational field c.Only if the total work done by the particle in moving around in a closed trajectory is zero d.Only if the force is tangential to the trajectory e.None of the above
Last Answer : c. Only if the total work done by the particle in moving around in a closed trajectory is zero
Description : The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above
Last Answer : a. More than 50 kgm
Description : A man pulls a cart with 100 N force from rest with an acceleration of 10 m/sec2 for 10 seconds. The work done by him is a.500 KJ b.50.96 KJ c.101.92 KJ d.None of the above e.Tapered bearing
Last Answer : a. 500 KJ
Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100
Last Answer : a. 628
Description : A rope of weight 0.5 kg/m hangs from a drum for a height of 6 m. The work done in winding up the rope will be a.9 kg-m b.3 kg-m c.12 kg-m d.18 kg-m e.6 kg-m
Last Answer : a. 9 kg-m
Description : A man lifts a stone weighting 300 g from the ground to a height of 2m and throws it horizontally with a velocity of 6 m/sec. The work done by the man is a.7.686 J b.11.286 J c.5.886 J d.8.343 J e.Tapered bearing
Last Answer : b. 11.286 J
Description : Work done by a body of mass 100 kg moving along a circular path of radius 2 m with a uniform velocity of 10 m/sec is a.5000 J b.2500 J c.509.68 J d.None of the above e.Tapered bearing
Last Answer : d. None of the above
Description : Under what condition the work done in reciprocating compressor will be least ?
Last Answer : It is least when compression process approaches isothermal. For this purpose, attempts are made to cool the air during compression.
Description : Which of the following is the work done for a closed reversible isometric system? a. negative b. positive c. zero d. undefined
Last Answer : zero