How is a 100 MVA transformer cooled?

How is a 100 MVA transformer cooled?
by

1 Answer

Answer :

100 MVA Transformer is cooled by forced oil forced water cooling method..
by

Related questions

If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Description : If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Last Answer : A. As we know the Voltage & current relation for transformer-V1/V2 = I2/I1 We Know, VI= 540 V; V2=11KV or 11000 V; I1= 2334 Amps. By putting these value on Relation540/11000= I2/2334 So,I2 = 114.5 Amps

If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Description : If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Last Answer :  As we know the Voltage & current relation for transformer-V1/V2 = I2/I1 We Know, VI= 540 V; V2=11KV or 11000 V; I1= 2334 Amps. By putting these value on Relation540/11000= I2/2334 So,I2 = 114.5 Amps

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : Answer: MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

How Generator Transformer is cooled in Thermal Power Plant?

Description : How Generator Transformer is cooled in Thermal Power Plant?

Last Answer : MVA power rating of the Generator Transformer will be equal to the alternator. Hence lot of heat will be generated while generator transformer is under operation. Oil Forced Air Forced (OFAF) type of cooling is employed for generator transformer

For which of the following ratings of the transformer differential protection is recommended ? (a) above 30 kVA. (b) equal to and above 5 MVA (c) equal to and above 25 MVA (d) none of the above

Description : For which of the following ratings of the transformer differential protection is recommended ? (a) above 30 kVA. (b) equal to and above 5 MVA (c) equal to and above 25 MVA (d) none of the above

Last Answer : (b) equal to and above 5 MVA

A generator is connected through a 20 MVA, 13.8/138 kV step down transformer, to a transmission line.

Description : A generator is connected through a 20 MVA, 13.8/138 kV step down transformer, to a transmission line. At the receiving end of the line a load is supplied through a step down transformer of 10 MVA, 138/69 kV rating. A 0.72 ... load (in per unit) in generator will be (A) 36 (B) 1.44 (C) 0.72 (D) 0.18

Last Answer : A generator is connected through a 20 MVA, 13.8/138 kV step down transformer, to a transmission line. At the receiving end of the line a load is supplied through a step down transformer of 10 MVA, 138/ ... MVA and 69 kV in load circuit, the value of the load (in per unit) in generator will be 36 

The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the

Description : The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is: A) 400 Mega Joule B) 400 Kilo Joule C) 25 Mega Joule D) 25 Kilo Joule

Last Answer : The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is: 400 Mega Joule

A 100 MVA, 11 KV, 3-phase, 50 Hz, 8—pole synchronous generator has an inertia constant H equal to

Description : A 100 MVA, 11 KV, 3-phase, 50 Hz, 8—pole synchronous generator has an inertia constant H equal to 4 seconds. The stored energy in the rotor of the generator at synchronous speed will be  A) 100 MJ B) 400 MJ C) 800 MJ D) 12.5 MJ

Last Answer : 800

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Description : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Last Answer : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of 0.02 P.U

A 60 Hz, 4 pole turbo generator rated 100 MVA, 13.8 KV has an inertia constant of 10 MJ/MVA. Find the stored...

Description : A 60 Hz, 4 pole turbo generator rated 100 MVA, 13.8 KV has an inertia constant of 10 MJ/MVA. Find the stored energy in the rotor at synchronous speed.  (A) 10 MJ (B) 100 J (C) 1000 J (D) 1000 MJ 

Last Answer : c

A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray can of refrigerant approved for this purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated using a capactance wheatstone bridge B. replaced and the reason for the overheating found C. cooled with a spray ... purpose D. resoldered with care taken to insure that the origional cold solder joint is repaired

Last Answer : Answer: B

A capacitor discolored due to excessive heat should be _____________. A. calibrated B. replaced C. cooled D. soldered

Description : A capacitor discolored due to excessive heat should be _____________. A. calibrated B. replaced C. cooled D. soldered

Last Answer : Answer: B

Which of the following statements concerning the specific gravity of a battery electrolyte is true? A. The electrolyte becomes less dense when it is cooled. B. The specific gravity reading is lowered when the electrolyte is heated. C. The most accurate hydrometer reading is obtained immediately after water is added. D. The temperature does not affect the specific gravity of the electrolyte.

Description : Which of the following statements concerning the specific gravity of a battery electrolyte is true? A. The electrolyte becomes less dense when it is cooled. B. The specific gravity reading is lowered ... water is added. D. The temperature does not affect the specific gravity of the electrolyte.

Last Answer : Answer: B

How rotor cooled?

Description : How rotor cooled? 

Last Answer : Hydrogen picked up from stator core backspace, passes through ventilation canals on rotor and comes out through adjacent canals. Shaft fans aid the hydrogen flow. Heat from the hydrogen removed by 4 nos. of hydrogen coolers. (NAPW)

How are the generator rotor and stator cooled?

Description : How are the generator rotor and stator cooled?  

Last Answer : Passing highly DM water through the hollow conductor of the generator cools generator stator and rotor is cooled by hydrogen. 

In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. (A) Indirect induction over (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Description : In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... ) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : Ans: D Magnetic property of alloy changes with change of the temperature and Heat is produced due to eddy current = i2R and i α f2

What is the full form of 'MVA' ? -How To ?

Description : What is the full form of 'MVA' ? -How To ?

Last Answer : The full form of 'MVA' is Motor Vehicles Act

What is the full form of MVA ?

Description : What is the full form of MVA ?

Last Answer : MVA full version Mega Volt Ampere.

Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) times the A.C. component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Description : Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) ... component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Last Answer : (a) Lightning arrestors are used before the switchgear

The forced oil and air circulation method is usual one for transformers of capacities (a) upto 5 MVA (b) upto 10 MVA (c) upto 20 MVA (d) 30 MVA upwards

Description : The forced oil and air circulation method is usual one for transformers of capacities (a) upto 5 MVA (b) upto 10 MVA (c) upto 20 MVA (d) 30 MVA upwards

Last Answer : (d) 30 MVA upwards

Transformers with a capacity of upto _____ have a cooling radiator system with natural cooling (a) 2 MVA (b) 5 MVA (c) 7.5 MVA (d) 10 MVA

Description : Transformers with a capacity of upto _____ have a cooling radiator system with natural cooling (a) 2 MVA (b) 5 MVA (c) 7.5 MVA (d) 10 MVA

Last Answer : (d) 10 MVA

A 20-MVA, 6.6-kV, 3-phase alternator is connected to a 3-phase transmission line. The per unit

Description : A 20-MVA, 6.6-kV, 3-phase alternator is connected to a 3-phase transmission line. The per unit positive-sequence, negative-sequence and zero-sequence impedances of the alternator are j0.1, j0.1 and j0.04 respectively. The neutral of ... the fault is  (A) 513.8 V (B) 889.9 V (C) 1112.0 V (D) 642.2 V

Last Answer : A 20-MVA, 6.6-kV, 3-phase alternator is connected to a 3-phase transmission line. The per unit positive-sequence, negative-sequence and zero-sequence impedances of the alternator are j0.1, ... line. The voltage of the alternator neutral with respect to ground during the fault is 642.2 V

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

The p.u. parameter for a 500 MVA machine on its own base are: inertia, M = 20 p.u. ; reactance, X = 2 p.u. The

Description : The p.u. parameter for a 500 MVA machine on its own base are: inertia, M = 20 p.u. ; reactance, X = 2 p.u. The p.u. values of inertia and reactance on 100 MVA common base, respectively, are (A) 4, 0.4 (B) 100, 10 (C) 4, 10 (D) 100, 0.4

Last Answer : The p.u. parameter for a 500 MVA machine on its own base are: inertia, M = 20 p.u. ; reactance, X = 2 p.u. The p.u. values of inertia and reactance on 100 MVA common base, respectively, are 100, 0.4

A three-phase, 33 kV oil circuit breaker is rated 1200 A, 2000 MVA, 3 s. The symmetrical breaking current is

Description : A three-phase, 33 kV oil circuit breaker is rated 1200 A, 2000 MVA, 3 s. The symmetrical breaking current is  (A) 1200 A (B) 3600 A (C) 35 kA (D) 104.8 kA

Last Answer : A three-phase, 33 kV oil circuit breaker is rated 1200 A, 2000 MVA, 3 s. The symmetrical breaking current is 35 kA 

A 500 MVA, 11 KV synchronous generator has 0.2 p.u. synchronous reactance. The p.u. synchronous reactance

Description : A 500 MVA, 11 KV synchronous generator has 0.2 p.u. synchronous reactance. The p.u. synchronous reactance on the base values of 100 MVA and 22 KV is  A) 0.16 B) 0.01 C) 4.0 D) 0.25

Last Answer : A 500 MVA, 11 KV synchronous generator has 0.2 p.u. synchronous reactance. The p.u. synchronous reactance on the base values of 100 MVA and 22 KV is 0.01

If the inertia constant H of a machine of 200 MVA is 2 p.u., its value corresponding to 400 MVA will be

Description : If the inertia constant H of a machine of 200 MVA is 2 p.u., its value corresponding to 400 MVA will be   (a) 4 p.u. (b) 2 p.u. (c) 1.0 p.u. (d) 0.5 p.u. 

Last Answer : If the inertia constant H of a machine of 200 MVA is 2 p.u., its value corresponding to 400 MVA will be 1.0 p.u.

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA.

Description : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Last Answer : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is 80 MJ

A 3-phase star-connected 75 MVA, 25 kV 3-phase synchronous generator has a synchronous reactance of...

Description : A 3-phase star-connected 75 MVA, 25 kV 3-phase synchronous generator has a synchronous reactance of 1.0 p.u. The per unit value to a 90 MVA base and 30 kV is (A) 2/15 p.u. (B) 5/6 p.u. (C) 1.0 p.u. (D) 1.2 p.u.

Last Answer : A 3-phase star-connected 75 MVA, 25 kV 3-phase synchronous generator has a synchronous reactance of 1.0 p.u. The per unit value to a 90 MVA base and 30 kV is 5/6 p.u.

A 3-phase circuit breaker is rated at 1250 A, 2000 MVA, 33 kV, 4s. Its making current capacity will be

Description : A 3-phase circuit breaker is rated at 1250 A, 2000 MVA, 33 kV, 4s. Its making current capacity will be   (a) 35 kA (b) 89 kA (c) 79 kA (d) 69 kA

Last Answer : 89

The per unit impedance of a circuit element is 0.30. If the base kV and base MVA are halved, then the new...

Description : The per unit impedance of a circuit element is 0.30. If the base kV and base MVA are halved, then the new value of the per unit impedance of the circuit element will be:  (A) 0.3 (B) 0.6 (C) 0.003 (D) 0.006 

Last Answer : 3

A load is connected to the secondary of the transformer illustrated and the current through the load is 10 amps. If the step-up ratio is 10 to 1 and the input voltage is 110 VAC, what will be the current flow through the primary? EL-0055 A. 1 amp B. 10 amps C. 100 amps D. 1000 amps

Description : A load is connected to the secondary of the transformer illustrated and the current through the load is 10 amps. If the step-up ratio is 10 to 1 and the input voltage is 110 VAC, what will be the current flow through the primary? EL-0055 A. 1 amp B. 10 amps C. 100 amps D. 1000 amps

Last Answer : Answer: C

What will happen if Transformer is operated at 100 HZ Frequency?

Description : What will happen if Transformer is operated at 100 HZ Frequency?

Last Answer : 1. As per EMF equation of the transformer frequency is directly proportional to winding voltage. If we double the frequency the sinusoidal root mean winf=ding voltage also doubled. E=4.44 * f*b*n* ... core 5) This is followed by heating up of the oil and thus cooling temperature goes down sharply.

Why aren't cars that are manufactured today air cooled?

Description : Why aren't cars that are manufactured today air cooled?

Last Answer : Air cooled, for larger engines would almost have to be a radial engine as opposed to an inline V-8 or V-6 wouldn’t it? Add. How many cylinders is your corvair?

How to recook a cooled, not completely cooked pumpkin pie?

Description : How to recook a cooled, not completely cooked pumpkin pie?

Last Answer : If the crust has browned on the edge then put foil around the edge and bake again. I haven’t had a problem re-cooking like that.

Would you expect the denatured DNA to regain its transforming capacity when cooled?

Description : Would you expect the denatured DNA to regain its transforming capacity when cooled?

Last Answer : This sounds like a homework question.

In a car, is heat cooled in the radiator?

Description : In a car, is heat cooled in the radiator?

Last Answer : Yes, water circulating through the block is cooled in the radiator then circulated back out.

I’m teary-eyed but never cry, silver-tongued, but never lie. double-winged, but never fly, air-cooled, but never dry. What am I? -Riddles

Description : I’m teary-eyed but never cry, silver-tongued, but never lie. double-winged, but never fly, air-cooled, but never dry. What am I? -Riddles

Last Answer : Mercury. The element looks shiny, silver, and is wet. The god Mercury has two wings but only uses them to run.

If the atmosphere is cooled, what is its capacity for water vapour? -General Knowledge

Description : If the atmosphere is cooled, what is its capacity for water vapour? -General Knowledge

Last Answer : The answer is 'Lowered'

If the atmosphere is cooled, what is its capacity for water vapour? -General Knowledge

Description : If the atmosphere is cooled, what is its capacity for water vapour? -General Knowledge

Last Answer : answer:

Are the electronics of artificial lands cooled?

Last Answer : "Yes. Satellites pay close attention to the" hot side "and" cold side "(there is quite a significant temperature difference between the sunny side and the shady side). This should be taken into account in the orbit. It 's a pretty complicated area of ​​satellite production.

A piece of magnesium ribbon was heated to redness in an atmosphere of nitrogen and then cooled with water. The gas evolved is

Description : A piece of magnesium ribbon was heated to redness in an atmosphere of nitrogen and then cooled with water. The gas evolved is

Last Answer : A piece of magnesium ribbon was heated to redness in an atmosphere of nitrogen and then cooled with ... . ammonia B. hydrogen C. nitrogen D. oxygen

Why a room can be warmed by leaving open the door of an oven but cannot be cooled by leaving open the door of a kitchen refrigerator?

Description : Why a room can be warmed by leaving open the door of an oven but cannot be cooled by leaving open the door of a kitchen refrigerator?

Last Answer : the second law of thermodynamics proves that heat always flowsfrom hot to cold. It is hard to give good every day examples, sincewhen you open the refrigerator door you feel cold but actually theroom is warming the fridge.

How many Btus of heat are removed per hour when the water at a flow rate of 10 pounds per minute is cooled 15 degrees Fahrenheit (Water weighs 8.33 pounds per gallon)?

Description : How many Btus of heat are removed per hour when the water at a flow rate of 10 pounds per minute is cooled 15 degrees Fahrenheit (Water weighs 8.33 pounds per gallon)?

Last Answer : Feel Free to Answer

What would happen if the air inside a hot air balloon cooled down?

Description : What would happen if the air inside a hot air balloon cooled down?

Last Answer : What is the answer ?

What happen with the air in a soccer ball with a cooled?

Description : What happen with the air in a soccer ball with a cooled?

Last Answer : What is the answer ?

What happen with the air in a soccer ball with a cooled and heated?

Description : What happen with the air in a soccer ball with a cooled and heated?

Last Answer : The air pressure goes down when cooled, goes up when heated. Asoccer ball left outdoors in freezing weather does not have muchbounce. Left outside on a hot day, has a lot of bounce.

What happened when the earth cooled?

Description : What happened when the earth cooled?

Last Answer : Need answer

What happens when paper is cooled?

Description : What happens when paper is cooled?

Last Answer : What happened when paper cooled

What happen with the air in a soccer ball with a cooled and heated?

Description : What happen with the air in a soccer ball with a cooled and heated?

Last Answer : The air pressure goes down when cooled, goes up when heated. Asoccer ball left outdoors in freezing weather does not have muchbounce. Left outside on a hot day, has a lot of bounce.