Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C
by

1 Answer

Answer :

Answer : D
by
selected

Related questions

Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Last Answer : Answer : D

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

Potato tuber growth is stopped at what temperature ? (a) 40°C — 42°C (b) 30°C — 32°C (c) 35°C — 37°C (d) 38°C – 40°C

Description : Potato tuber growth is stopped at what temperature ? (a) 40°C — 42°C (b) 30°C — 32°C (c) 35°C — 37°C (d) 38°C – 40°C

Last Answer : (b) 30°C — 32°C

Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Description : Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Last Answer : 3) 50°C – 60°C

If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor?

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 5 3 5 3 5 3 5 3 5 5 3 3 5 3 5 3 Region to be amplified . (a) B - denaturation at a temperature of about 98°C separating the two DNA strands (b) A - denaturation at a temperature of about 50°C (c) C - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Description : The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 ... - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Last Answer : (c) C - extension in the presence of heat stable DNA polymerase

Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Description : Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Last Answer : 25°C

Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel apparatus is used for determining flash points below 50°C (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) Humidified with wet bulb temperature decreasingB) Humidified at constant wet bulb temperature(C) Dehumidified(D) None of these

Description : Unsaturated air (with dry bulb and wet bulb temperatures being 45°C and 25°C respectively) is passed through a water spray chamber maintained at 23°C. The air will be cooled and (A) ... temperature decreasing B) Humidified at constant wet bulb temperature (C) Dehumidified (D) None of these

Last Answer : (A) Humidified with wet bulb temperature decreasing

The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Description : The wet and 'dry bulb temperature for a vapour-gas mixture are 25°C and 30°C respectively. If the mixture is heated to 45°C at constant pressure, the wet bulb temperature will be __________ °C. (A) 25 (B) > 25 (C) < 25 (D) - 25

Last Answer : (B) > 25

In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining the same, the temperature of the exit liquid will be (A) Less than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C(B) Most of the enzyme catalysed reactions involve at least two substrates (C) Enzymes help in increasing the activation energy of the reaction (D) Equilibrium concentrations in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; Temperature 18°-22°C 5. Rainfall 500-600 mm; Temperature 18°-22°C A B C D (a) 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Last Answer : Ans: (d)

Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And humidified (B) And dehumidified with increase in wet bulb temperature (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Description : Unsaturated air (with dry bulb temperature and dew point being 35°C and 18°C respectively) is passed through a water spray chamber maintained at 15°C. The air will be cooled (A) And ... (C) At the same relative humidity (D) And dehumidified with decrease in wet bulb temperature

Last Answer : (D) And dehumidified with decrease in wet bulb temperature

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Description : Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Last Answer : (b) 20-25°C

Which of the following processes is followed by unsaturated air (with dry bulb temperature 12°C and relative humidity 47%) passing through water spray washer (temperature of water being constant at 40°C? (A) Humidification only (B) Heating only (C) Both heating and humidification (D) Evaporative cooling

Description : Which of the following processes is followed by unsaturated air (with dry bulb temperature 12°C and relative humidity 47%) passing through water spray washer (temperature of water being constant at 40°C ... (B) Heating only (C) Both heating and humidification (D) Evaporative cooling

Last Answer : (C) Both heating and humidification

Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C

Description : Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C

Last Answer : Answer : B

Convert 45°C into Farhenite.

Description : Convert 45°C into Farhenite.

Last Answer : For 45 into ℉

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

The change in temperature of a body is 50°C. What is the change on Kelvin scale?

Description : The change in temperature of a body is 50°C. What is the change on Kelvin scale?

Last Answer : 50 K

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Description : The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Last Answer : (B) Excessive corrosion

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Description : Unsaturated air (with dry and wet bulb temperatures being 35 and 25°C respectively) is passed through water spray chamber maintained at 35°C. The air will be (A) Cooled (B) Humidified (C) Both (A) & (B) (D) Dehumidified

Last Answer : (B) Humidified

Hatchling of ferlized eggs takes place at a 21 days, 35°c b 21 days,38°c c 23 days,35°c d 23 days,38°c

Description : Hatchling of ferlized eggs takes place at a 21 days, 35°c b 21 days,38°c c 23 days,35°c d 23 days,38°c

Last Answer : b 21 days,38°c

Pick up the correct statement from the following: A. Rate of digestion of sludge is more at higher temperature B. Thermophilic organisms digest the sludge if the temperature ranges from 40° to 60°C C. Mesophilic organisms digest the sludge if the temperature is between 25° and 40°C D. All the above

Description : Pick up the correct statement from the following: A. Rate of digestion of sludge is more at higher temperature B. Thermophilic organisms digest the sludge if the temperature ranges from 40° to 60°C C. Mesophilic organisms digest the sludge if the temperature is between 25° and 40°C D. All the above

Last Answer : ANS: D

Electric motors intended for use outside the engine room and boiler room are frequently rated to run at a designed ambient temperature of 40°C. What is the equivalent temperature in degrees Fahrenheit? A. 54.2°F B. 72.0°F C. 104.0°F D. 129.6°F

Description : Electric motors intended for use outside the engine room and boiler room are frequently rated to run at a designed ambient temperature of 40°C. What is the equivalent temperature in degrees Fahrenheit? A. 54.2°F B. 72.0°F C. 104.0°F D. 129.6°F

Last Answer : Answer: C

One item listed on the name plate of a cargo pump motor is 'degrees centigrade rise.' This number is based on _____________. A. normal temperature change from cold to hot B. an ambient temperature of 40°C C. minimum heat rise from no load to full load D. maximum degrees centigrade rise from absolute zero

Description : One item listed on the name plate of a cargo pump motor is 'degrees centigrade rise.' This number is based on _____________. A. normal temperature change from cold to hot B. an ambient temperature ... . minimum heat rise from no load to full load D. maximum degrees centigrade rise from absolute zero

Last Answer : Answer: B

Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature

Description : Air initially at 101. 3 kPa and 40°C and with a relative humidity of 50%, is cooled at constant pressure to 30°C. The cooled air has a (A) Higher dew point (B) Higher absolute (specific) humidity (C) Higher relative humidity (D) Higher wet bulb temperature

Last Answer : (C) Higher relative humidity

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300

Description : A solid aluminium ball, when quenched in a water bath maintained at 40°C, cools down from 550°C to 450°C in 20 seconds. The expected temperature of the ball after next 20 seconds may be about __________ °C. (A) 370 (B) 340 (C) 320 (D) 300

Last Answer : (A) 370

Softening point of bitumen to be used for read construction at a place where maximum temperature is 40°C should be (A) Less than 40°C (B) Greater than 40°C (C) Equal to 40°C (D) None of the above

Description : Softening point of bitumen to be used for read construction at a place where maximum temperature is 40°C should be (A) Less than 40°C (B) Greater than 40°C (C) Equal to 40°C (D) None of the above

Last Answer : Answer: Option B

If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Last Answer : Answer : b

The boiling point of ammonia is (a) -100°C (b) -50°C (c) - 33.3°C (d) 33.3°C.

Description : The boiling point of ammonia is (a) -100°C (b) -50°C (c) - 33.3°C (d) 33.3°C.

Last Answer : Ans: c

Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Description : Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Last Answer : (A) Abel apparatus

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

A closed system is cooled reversibly from 100°C to 50°C. If no work is done on the system (A) its internal energy (U) decreases and its entropy (S) increases (B) U and S both decreases (C) U decreases but S is constant (D) U is constant but S decreases

Description : A closed system is cooled reversibly from 100°C to 50°C. If no work is done on the system (A) its internal energy (U) decreases and its entropy (S) increases (B) U and S both decreases (C) U decreases but S is constant (D) U is constant but S decreases

Last Answer : (B) U and S both decreases

Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Description : Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Last Answer : C) Solution of NaCl in water at 50°C

The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Description : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Last Answer : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ? 60 microsecond

An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms

Description : An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms

Last Answer : Answer: A

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0.

Description : The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0. 

Last Answer : Observed resistance at 70°C – 15 MΩ. Temperature correction factor – 8. Rm = kt * Rt           kt – correction factor. Rm = 8 * 15          Rt – resistance measured at +°C. Rm = 120 MΩ.       Rm – corrected value to 40°C The IR of DC motor corrected to 40°C is 120 MΩ.