How does channel roughness influence river velocity?

How does channel roughness influence river velocity?
by

1 Answer

Answer :

These obstacles causes friction between water and rocks.This ultimately reduces the velocity of river water.The more roughness of the channel, the less the river`s velocity.
by
selected by

Related questions

The losses in open channel flow generally vary as the (A) Inverse of the roughness (B) First power of the roughness (C) Square of the velocity (D) Inverse square of hydraulic radius

Description : The losses in open channel flow generally vary as the (A) Inverse of the roughness (B) First power of the roughness (C) Square of the velocity (D) Inverse square of hydraulic radius

Last Answer : (B) First power of the roughness

Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Description : Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Last Answer : (C) Reynold number, relative roughness and head loss

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

How to get rid of roughness of face ?

Description : How to get rid of roughness of face ?

Last Answer : Take 1 tablespoon butter , 1 teaspoon honey and 1/4 teaspoon lemon juice. Now mix all the ingredients together in a bowl and make a smooth cream like paste. Brush it evenly on clean skin and apply it ... the skin must be cleaned by scrubbing the skin and the pack can be made and kept in the fridge.

depends upon The Chezy’s constant C in the formula V = C A. Size of the sewer B. Shape of the sewer C. Roughness of sewer surface D. All the above

Description : depends upon The Chezy’s constant C in the formula V = C A. Size of the sewer B. Shape of the sewer C. Roughness of sewer surface D. All the above

Last Answer : ANS: D

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Description : Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Description : The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Last Answer : (A) Depends only on Reynolds number

The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Description : The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Last Answer : (D) None of these

During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Description : During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Last Answer : (D) Absolute roughness increases linearly with time

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

Pressure drag does not depend upon the(A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Description : Pressure drag does not depend upon the (A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined)? (A) ε = ε0 + α.t (B) ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Description : Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined ... ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Last Answer : (A) ε = ε0 + α.t

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

The schedule number of a pipe is an indication of its (A) Size (B) Roughness (C) Material density (D) Wall thickness

Description : The schedule number of a pipe is an indication of its (A) Size (B) Roughness (C) Material density (D) Wall thickness

Last Answer : (D) Wall thickness

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Auto collimator is used to check (A) Flatness (B) Angle (C) Rotor balancing (D) Roughness

Description : Auto collimator is used to check (A) Flatness (B) Angle (C) Rotor balancing (D) Roughness

Last Answer : (B) Angle

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

The most serious manufacturing defect from fracture toughness point of view is (A) Surface roughness (B) Pores (C) Spherical inclusion (D) Crack

Description : The most serious manufacturing defect from fracture toughness point of view is (A) Surface roughness (B) Pores (C) Spherical inclusion (D) Crack

Last Answer : Option D

Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Description : Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Last Answer : Answer: Option C

Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Description : Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Last Answer : Answer: Option B

What is a good estimate for the absolute roughness for epoxy lined carbon steel pipe?

Description : What is a good estimate for the absolute roughness for epoxy lined carbon steel pipe?

Last Answer : The specific roughness for welded, seamless steel is .0002 ft. PVC has a specific roughness of 0.000005 ft. You may also want to consider using the Hazen-Williams formula, which lists a ... for cement-lined cast iron piping. You need to decide which is more conservative for your application.

What is the maximum surface roughness permitted by ASME B31.1 for the sidewall of ring grooves? a) 63 µ in b) 125 µ in. c) 250 µ in. d) 400 µ in

Description : What is the maximum surface roughness permitted by ASME B31.1 for the sidewall of ring grooves? a) 63 µ in b) 125 µ in. c) 250 µ in. d) 400 µ in

Last Answer : a) 63 µ in

What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above

Description : In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above

Last Answer : B. It does not conform to the bonding requirements

________ refer to the surface roughness of the tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Description : ________ refer to the surface roughness of the tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Last Answer : a) Micro shape

The heat dissipated by from a surface depends upon its temperature and its characteristics like colour, roughness etc. (a) conduction (b) convection (c) radiation (d) any ofthe above

Description : The heat dissipated by from a surface depends upon its temperature and its characteristics like colour, roughness etc. (a) conduction (b) convection (c) radiation (d) any ofthe above

Last Answer : (c) radiation

A television channel is characterized by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Description : A television channel is characterized by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Last Answer : (1) frequency of transmitted signal Explanation: A television channel is a physical or virtual channel over which a television station or television network is distributed. Channel numbers represent actual frequencies used to ... .75 MHz for analog audio (FM), or 55.31 MHz for digital ATSC (8VSB).

Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Description : Boundary layer separation occurs when the (A) Pressure reaches a minimum (B) Cross-section of the channel is reduced (C) Valve is closed in a pipeline (D) Velocity of sound is reached

Last Answer : (B) Cross-section of the channel is reduced

For liquid flow through a packed bed, the superficial velocity as compared to average velocity through the channel in the bed is (A) More (B) Less (C) Equal (D) Independent of porosity

Description : For liquid flow through a packed bed, the superficial velocity as compared to average velocity through the channel in the bed is (A) More (B) Less (C) Equal (D) Independent of porosity

Last Answer : (B) Less

The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Description : The ratio of the hydraulic radius to the diameter of the channel, for maximum mean velocity of flow in a circular channel, in open channel flow is (A) 0.3 (B) 0.9 (C) 0.03 (D) 0.66

Last Answer : (A) 0.3

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Description : A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Last Answer : Answer: Option D

20. The velocity of flow is same at all points in the cross-section of a channel. A) True B) False

Description : 20. The velocity of flow is same at all points in the cross-section of a channel. A) True B) False

Last Answer : B

The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Description : The velocity through a channel of circular section will be maximum when the depth of water is __________ the diameter of the circular channel. (A) 0.34 times (B) 0.67 times (C) 0.81 times (D) 0.95 times

Last Answer : Answer: Option C

The critical depth meter is used to measure (A) Velocity of flow in an open channel (B) Depth of flow in an open channel (C) Hydraulic jump (D) Depth of channel

Description : The critical depth meter is used to measure (A) Velocity of flow in an open channel (B) Depth of flow in an open channel (C) Hydraulic jump (D) Depth of channel

Last Answer : Answer: Option C

A television channel is characterised by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Description : A television channel is characterised by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Last Answer : frequency of transmitted signal

To which river is the dockyard at 'Lothal is connected through' a channel? -Do You Know?

Description : To which river is the dockyard at 'Lothal is connected through' a channel? -Do You Know?

Last Answer : Sabarmati The archaeological remains of the Harappan port-town of Lothal is located along the Bhogava river, a tributary of Sabarmati, in the Gulf of Khambat.

Loss of homes, permanent changes in the position of river channel and adverse effects on tourism

Description : Loss of homes, permanent changes in the position of river channel and adverse effects on tourism

Last Answer : Choose the correct option by identifying the correct correlation in the sentence: Loss of homes, ... disaster (d) secondary effects of a disaster

What are the sides of a river channel called?

Description : What are the sides of a river channel called?

Last Answer : What is the answer ?

A broad, low embankment built up along the banks of a river channel during floods is called (1) Delta (2) Levee (3) Flood Plain (4) Dune

Description : A broad, low embankment built up along the banks of a river channel during floods is called (1) Delta (2) Levee (3) Flood Plain (4) Dune

Last Answer : (2) Levee Explanation: A levee, dike, dyke or flood bank is a broad, low embankment built up along the banks of a river channel during floods. Levees are usually parallel to the way the ... so levees can help direct the flow of the river. Levees can also be artificially created or reinforced.

To which river is the dockyard at ‘Lothal is connected through’ a channel?

Description : To which river is the dockyard at ‘Lothal is connected through’ a channel?

Last Answer : Bhogavo

Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Description : Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Last Answer : (B) Pipe

A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Description : A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Last Answer : (A) Circular