How to get rid of roughness of face ?

How to get rid of roughness of face ?
by

1 Answer

Answer :

Take 1 tablespoon butter , 1 teaspoon honey and 1/4 teaspoon lemon juice. Now mix all the ingredients together in a bowl and make a smooth cream like paste. Brush it evenly on clean skin and apply it all over the skin. Wait 20 to 30 minutes and then clean the skin by soaking a thin soft cloth in lukewarm water. Wet cloth should be used whenever the skin is completely clean. Then dry the skin with a dry cloth. You can use this pack 2/1 times a week . Butter and honey are very good moisturizing ingredients which are able to remove the roughness of the skin completely. However, before using this pack, the skin must be cleaned by scrubbing the skin and the pack can be made and kept in the fridge.
by

Related questions

How to get rid of redness on face and thicken skin ?

Description : How to get rid of redness on face and thicken skin ?

Last Answer : : Buy aspirin tablets that are available in the market without the usual non-gel coats. Break half the tablet into powder. Make a paste with very little (2/1 drop) of water and apply it on ... like that can be said about thickening the skin. Seek the advice of any dermatologist near you. Thanks.

What is the natural way to get rid of acne and dark spots on the skin of the face ?

Description : What is the natural way to get rid of acne and dark spots on the skin of the face ?

Last Answer : Clove is an ingredient in hot spices. It eliminates acne scars as well as acne scars. Apply clove paste on acne for 20 to 25 minutes and wash off with clean water. It will not scar ... cause acne on the skin. In addition , applying clove paste with sandalwood powder removes various skin problems.

What do I do to get rid of the inertia of the face ?

Description : What do I do to get rid of the inertia of the face ?

Last Answer : Some people have problems with pronunciation while speaking. Maybe it's okay, but some people get stuck when it comes to talking fast. When someone reads something again, they get stuck despite knowing ... na achancha chata chache. -The most suitable time to pronounce the words is in the morning.

Ways to get rid of dark spots on the face ?

Description : Ways to get rid of dark spots on the face ?

Last Answer : You can use BatnoVet B cream. It removes dark spots on the face.

What are the easy ways to get rid of dark spots on the face ?

Last Answer : The face is the most beautiful part of our body. And so if any black spots appear on this face, it is not desirable for us at all. These black spots, which in many cases cause discomfort, are the ... white and orange juice. Now apply the mixture on the skin for 25 to 30 minutes and wash it off.

How does channel roughness influence river velocity?

Description : How does channel roughness influence river velocity?

Last Answer : These obstacles causes friction between water and rocks.This ultimately reduces the velocity of river water.The more roughness of the channel, the less the river`s velocity.

depends upon The Chezy’s constant C in the formula V = C A. Size of the sewer B. Shape of the sewer C. Roughness of sewer surface D. All the above

Description : depends upon The Chezy’s constant C in the formula V = C A. Size of the sewer B. Shape of the sewer C. Roughness of sewer surface D. All the above

Last Answer : ANS: D

Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness (C) The emissivity of a polished surface is quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Description : Pick out the wrong statement. (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment (B) The emissivity of a surface increases with increase in surface roughness ... quite low (D) The emissivity of a non-metallic surface decreases with increase in the temperature

Last Answer : (A) The emissivity of a surface decreases, if it gets corroded by atmospheric environment

Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Description : Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Description : The friction factor for turbulent flow in a hydraulically smooth pipe (A) Depends only on Reynolds number (B) Does not depend on Reynolds number (C) Depends on the roughness (D) None of these

Last Answer : (A) Depends only on Reynolds number

The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Description : The friction factor is (A) Always inversely proportional to the Reynolds number (B) Not dimensionless (C) Not dependent on the roughness of the pipe (D) None of these

Last Answer : (D) None of these

During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Description : During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Last Answer : (D) Absolute roughness increases linearly with time

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

Pressure drag does not depend upon the(A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Description : Pressure drag does not depend upon the (A) Roughness of surface of the body (B) Pressure of main flow only (C) Length of the body in flow direction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined)? (A) ε = ε0 + α.t (B) ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Description : Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined ... ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Last Answer : (A) ε = ε0 + α.t

Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Description : Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Last Answer : (C) Reynold number, relative roughness and head loss

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

The schedule number of a pipe is an indication of its (A) Size (B) Roughness (C) Material density (D) Wall thickness

Description : The schedule number of a pipe is an indication of its (A) Size (B) Roughness (C) Material density (D) Wall thickness

Last Answer : (D) Wall thickness

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The losses in open channel flow generally vary as the (A) Inverse of the roughness (B) First power of the roughness (C) Square of the velocity (D) Inverse square of hydraulic radius

Description : The losses in open channel flow generally vary as the (A) Inverse of the roughness (B) First power of the roughness (C) Square of the velocity (D) Inverse square of hydraulic radius

Last Answer : (B) First power of the roughness

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Auto collimator is used to check (A) Flatness (B) Angle (C) Rotor balancing (D) Roughness

Description : Auto collimator is used to check (A) Flatness (B) Angle (C) Rotor balancing (D) Roughness

Last Answer : (B) Angle

Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Description : Friction factor for fluid flow in pipe does not depend upon the (A) Pipe length (B) Pipe roughness (C) Fluid density & viscosity (D) Mass flow rate of fluid

Last Answer : A) Pipe length

The most serious manufacturing defect from fracture toughness point of view is (A) Surface roughness (B) Pores (C) Spherical inclusion (D) Crack

Description : The most serious manufacturing defect from fracture toughness point of view is (A) Surface roughness (B) Pores (C) Spherical inclusion (D) Crack

Last Answer : Option D

Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Description : Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Last Answer : Answer: Option C

Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Description : Seasoning of timber is essential to remove (A) Knots from timber (B) Sap from timber (C) Twisted fibre from timber (D) Roughness of timber

Last Answer : Answer: Option B

What is a good estimate for the absolute roughness for epoxy lined carbon steel pipe?

Description : What is a good estimate for the absolute roughness for epoxy lined carbon steel pipe?

Last Answer : The specific roughness for welded, seamless steel is .0002 ft. PVC has a specific roughness of 0.000005 ft. You may also want to consider using the Hazen-Williams formula, which lists a ... for cement-lined cast iron piping. You need to decide which is more conservative for your application.

What is the maximum surface roughness permitted by ASME B31.1 for the sidewall of ring grooves? a) 63 µ in b) 125 µ in. c) 250 µ in. d) 400 µ in

Description : What is the maximum surface roughness permitted by ASME B31.1 for the sidewall of ring grooves? a) 63 µ in b) 125 µ in. c) 250 µ in. d) 400 µ in

Last Answer : a) 63 µ in

What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Description : What is the maximum surface roughness for tongue and groove and small male and female gasket surfaces? a) 63 µ in b) 125 µ in c) 250 µ in d) 400 µ in

Last Answer : b) 125 µ in

In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above

Description : In regard to the enamel surface: A. It is a perfect substance for bonding B. It does not conform to the bonding requirements C. It is the most inorganic, rough part D. It is free from contamination and roughness E. None of the above

Last Answer : B. It does not conform to the bonding requirements

________ refer to the surface roughness of the tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Description : ________ refer to the surface roughness of the tool a) Micro shape c) Edge shape b) Macro shape d) Gross shape

Last Answer : a) Micro shape

The heat dissipated by from a surface depends upon its temperature and its characteristics like colour, roughness etc. (a) conduction (b) convection (c) radiation (d) any ofthe above

Description : The heat dissipated by from a surface depends upon its temperature and its characteristics like colour, roughness etc. (a) conduction (b) convection (c) radiation (d) any ofthe above

Last Answer : (c) radiation

We can prevent infectious diseases by covering our face with our hands or using handkerchief during sneezing and coughing. Why is it better to use the back of the hand or the fold of the elbow than the palm of the hand ?

Description : We can prevent infectious diseases by covering our face with our hands or using handkerchief during sneezing and coughing. Why is it better to use the back of the hand or the fold of the elbow than the palm of the hand ?

Last Answer : We can prevent infectious diseases by covering our face with our hands or using handkerchiefs during sneezing and coughing. In this case, it is better to use the back of the hand or the fold of the ... diseases during sneezing and coughing as the back of the hand or elbow is less used during work.

How to use olive oil on face ?

Description : How to use olive oil on face ?

Last Answer : : You will first clean the face with facewash, then wipe the face and apply olive oil cream in the same way or apply oil on the skin. I hope you will continue to pay regularly. He will drink more water.

I don't sleep regularly. I have bad dreams and my face is getting worse .

Description : I don't sleep regularly. I have bad dreams and my face is getting worse .

Last Answer : You should sleep with your left hand under your head with your right hand crying while sleeping every night. InshaAllah all problems will be solved.

What foods will increase the beauty of the face if taken in adolescence ?

Description : What foods will increase the beauty of the face if taken in adolescence ?

Last Answer : Nutritious food is needed to ensure physical and mental well-being during adolescence. Beautiful mind lives in a healthy body. If the body is not healthy, there is no happiness in anything. He does not even ... meat , sugar , fat or oil , minerals , vitamins and water are required in the daily diet.

Does using mustard oil on the face make the skin black ?

Description : Does using mustard oil on the face make the skin black ?

Last Answer : It is often heard that white skin becomes black with mustard oil . But is it really so ? Science says no . Mustard oil, rich in omega alpha 3 , omega alpha 6 , fatty acids , vitamin E ... skin radiance and retains youth. So using mustard oil makes the skin black , such an idea is completely wrong.

Which cream is best to remove dark spots on the face ?

Description : Which cream is best to remove dark spots on the face ?

Last Answer : Remy spot cleaner cream that removes dark spots , acne , acne scars , cuts , etc. Weight: 50 grams Price: 50

How to remove blade stains on face ?

Description : How to remove blade stains on face ?

Last Answer : You can try BetnoVet cream. Get good benefits. If necessary, you can take the advice of a doctor.

Acne Problems and Acne Scars on the Face ?

Description : Acne Problems and Acne Scars on the Face ?

Last Answer : If the acne is good, you don't have to worry about the spots, you don't have to use anything. The acne scars will be cured by itself. I hope you will start getting results in a few days

What is the way to keep skin fair and normal when face and hands and feet become black in winter ?

Description : What is the way to keep skin fair and normal when face and hands and feet become black in winter ?

Last Answer : You have to take regular bath with lukewarm water and drink plenty of water at the same time. If possible, drink lemon juice mixed with salt in hot water. And be very careful when using lotions or ... consumed. All in all, the skin is damaged. These problems can be avoided with proper care. Thanks.

What to do if the face is getting dry day by day ?

Description : What to do if the face is getting dry day by day ?

Last Answer : You should eat nutritious food every day. Get 8-10 hours of sleep a night . Do not do any kind of tension. Make the amount of food more light. And if you can , eat Hamdard's Sinkara syrup .

What is the way to make a full face. ?

Description : As a result of excessive masturbation, my face has become very pale and broken. Which is why I am getting very ashamed. Now it is very important to get rid of this problem. Please give me some tips. So that we can solve in a short time.

Last Answer : Like first whether you masturbate now. If it's Jhadi, I'll tell you to stop it first. After that you have to see if you have nightmares. If you are stubborn then you have to take a syrup One ... rules. Eat rice three times a day and sleep for one hour throughout the day. Hope your problem is fixed.

What is the way to get rid of eye irritation or itching ?

Description : What is the way to get rid of eye irritation or itching ?

Last Answer : Irritation or itching of the eyes is a very common problem. This problem is due to the fact that the environment is very polluted or the season is very allergic. However, when there is itching or burning in the eyes, it is ... this water. 3. Follow this procedure 2/3 times a day.

How to get rid of eye fatigue ?

Description : How to get rid of eye fatigue ?

Last Answer : Cucumber We often see many people lying in the parlor with a piece of cucumber in their eyes. One of the reasons for this is that cucumber is one of the great medicines to reduce the fatigue of our ... into the eyes. After applying the gel for a while, wash your eyes. Your eye fatigue will decrease.

What should be done to prevent hair loss ? How to get rid of gray hair ?

Description : What should be done to prevent hair loss ? How to get rid of gray hair ?

Last Answer : Hair loss can be prevented by sitting at home with some tips that are readily available. 1. Use light hot oil. Lightly heat any natural oil such as olive , coconut oil , canola oil (made ... The main cause of hair loss is stress and anxiety. Yoga can alleviate this and maintain hormonal balance.