The hash function used in double hashing is of the form: (A) h(k, i)=(h1(k)+h2(k)+i)mod m (B) h(k, i)=(h1(k)+h2(k)-i)mod m (C) h(k, i)=(h1(k)+ih2(k))mod m (D) h(k, i)=(h1(k)-ih2(k))mod m

The hash function used in double hashing is of the form: (A) h(k, i)=(h1(k)+h2(k)+i)mod m (B) h(k, i)=(h1(k)+h2(k)-i)mod m (C) h(k, i)=(h1(k)+ih2(k))mod m (D) h(k, i)=(h1(k)-ih2(k))mod m
by

1 Answer

Answer :

Answer: C
by

Related questions

Consider a hash table of size m=100 and the hash function h(k) = floor(m(kA mod 1)) for A = (√5 − 1)/2 = 0.618033. Compute the location to which the key k = 123456 is placed in hash table. (A) 77 (B) 82 (C) 88 (D) 89

Description : Consider a hash table of size m=100 and the hash function h(k) = floor(m(kA mod 1)) for A = (√5 − 1)/2 = 0.618033. Compute the location to which the key k = 123456 is placed in hash table. (A) 77 (B) 82 (C) 88 (D) 89

Last Answer : (C) 88

If h is chosen from a universal collection of hash functions and is used to hash n keys into a table of size m, where n ≤ m, the expected number of collisions involving a particular key K is (A) less than 1 (B) less than lg n (C) greater than 1 (D) greater than lg n

Description : If h is chosen from a universal collection of hash functions and is used to hash n keys into a table of size m, where n ≤ m, the expected number of collisions involving a particular key K is (A) less than 1 (B) less than lg n (C) greater than 1 (D) greater than lg n

Last Answer : (A) less than 1

If h is chosen from a universal collection of hash functions and is used to hash n keys into a table of size m, where n≤m, the expected number of collisions involving a particular key x is less than ................... (1) 1 (2) 1/n (3) 1/m (4) n/m

Description : If h is chosen from a universal collection of hash functions and is used to hash n keys into a table of size m, where n≤m, the expected number of collisions involving a particular key x is less than ................... (1) 1 (2) 1/n (3) 1/m (4) n/m

Last Answer : Answer: 1

The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. The total height of confined aquifer H is given by (A) H = h2 - h1 (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Description : The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. ... (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Last Answer : Answer: Option D

A recursive function h, is defined as follows: h(m)=k, if m=0 = 1, if m=1 = 2h(m-1) + 4h(m-2), if m≥2 If the value of h(4) is 88 then the value of k is: (1) 0 (2) 1 (3) 2 (4) -1

Description : A recursive function h, is defined as follows: h(m)=k, if m=0  = 1, if m=1 = 2h(m-1) + 4h(m-2), if m≥2 If the value of h(4) is 88 then the value of k is: (1) 0 (2) 1 (3) 2 (4) -1

Last Answer : (3) 2 

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

In ……………, search start at the beginning of the list and check every element in the list. A) Linear search B) Binary search C) Hash Search D) Binary Tree search

Description : In ……………, search start at the beginning of the list and check every element in the list. A) Linear search B) Binary search C) Hash Search D) Binary Tree search

Last Answer : A) Linear search

Given an open address hash table with load factor a < 1, the expected number of probes in a successful search is (A) Atmost 1/α ln (1-α/α) (B) Atmost 1/α ln (1/1-α) (C) Atleast 1/α ln (1/1-α) (D) Atleast 1/α ln (α/1-α)

Description : Given an open address hash table with load factor a < 1, the expected number of probes in a successful search is (A) Atmost 1/α ln (1-α/α) (B) Atmost 1/α ln (1/1-α) (C) Atleast 1/α ln (1/1-α) (D) Atleast 1/α ln (α/1-α)

Last Answer : (B) Atmost 1/α ln (1/1-α)

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

What is the difference between the Hummer H2 and H1?

Description : What is the difference between the Hummer H2 and H1?

Last Answer : The H1 is the original Hummer or Humvee, based on the military model. The H2 was introduced as a more consumer-friendly model, based on the Chevy Suburban body frame. It's narrower, but slightly longer and taller than the H1. They both share the distinctive Humvee grille design.

Smooth muscle relaxation is due to stimulation of which type of histamine receptors (a) H1 (b) H2 (c) H3 (d) All of the above

Description : Smooth muscle relaxation is due to stimulation of which type of histamine receptors (a) H1 (b) H2 (c) H3 (d) All of the above

Last Answer : Ans: B

The capacity of an antihistaminic to produce sedation depends on the following except (a) Relative affinity for central versus peripheral H1 receptors (b) Ability to penetrate blood-brain barrier (c) Individual susceptibility (d) Ratio of H1 : H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except (a) Relative affinity for central versus peripheral H1 receptors (b) Ability to penetrate blood-brain barrier (c) Individual susceptibility (d) Ratio of H1 : H2 blockade produced by the drug

Last Answer : Ans: D

Fall in blood pressure caused by larger doses of histamine is blocked by (a) H1 antihistaminics alone (b) H2 ANTAgonists alone (c) Combination of H1 and H2 antagonists (d) None of the above

Description : Fall in blood pressure caused by larger doses of histamine is blocked by (a) H1 antihistaminics alone (b) H2 ANTAgonists alone (c) Combination of H1 and H2 antagonists (d) None of the above

Last Answer : Ans: C

Diamprit is an agonist of ______ receptors, except (a) H1 (b) H2 (c) H3 (d) All of the above

Description : Diamprit is an agonist of ______ receptors, except (a) H1 (b) H2 (c) H3 (d) All of the above

Last Answer : Ans: A

When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of the process (humidification or dehumidification) then, the sensible heat factor (H2 – H1) / (H3 – H1) represents the process of A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Description : When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of ... A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Last Answer : ANSWER : C

The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Last Answer : Answer: B

As shown in the illustration, 'H1' and 'H2' are ___________. EL-0058 A. fixed capacitors B. variable capacitors C. contacts, closed when the circuit is energized D. contacts, open when the circuit is energized

Description : As shown in the illustration, 'H1' and 'H2' are ___________. EL-0058 A. fixed capacitors B. variable capacitors C. contacts, closed when the circuit is energized D. contacts, open when the circuit is energized

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Last Answer : Answer: B

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Last Answer : Answer: A

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Last Answer : Answer: B

The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Description : If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Last Answer : (B) Always between h1 and h2

The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Last Answer : (C) H5/2

In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Description : In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Last Answer : A) Mechanical

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Last Answer : D. Ratio of H1:H2 blockade produced by the drug

Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Description : Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Last Answer : C. Combination of H1 and H2 antagonists

The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Description : The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Last Answer : D. GABA-benzodiazepine receptor

The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Last Answer : D. Ratio of H1:H2 blockade produced by the drug

Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Description : Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Last Answer : C. Combination of H1 and H2 antagonists

The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Description : The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Last Answer : D. GABA-benzodiazepine receptor

If h and h1 are the heights of a light house and the observer in a ship in metres above M S L then the horizontal distance from the ship to the light house in kilometres is (A) h + h1) (B) h - h1) (C) h × h1) (D) 3.86 h + h1)

Description : If h and h1 are the heights of a light house and the observer in a ship in metres above M S L then the horizontal distance from the ship to the light house in kilometres is (A) h + h1) (B) h - h1) (C) h × h1) (D) 3.86 h + h1)

Last Answer : (A) h + h1)

A hashing function for digital signature (i) must give a hashed message which is shorter than the original message (ii)must be hardware implementable (iii) two different messages should not give the same hashed message (iv) is not essential for implementing digital signature a. i and ii b. ii and iii c. i and iii d. iii and iv

Description : A hashing function for digital signature (i) must give a hashed message which is shorter than the original message (ii)must be hardware implementable (iii) two different messages should not give the same hashed message (iv) ... signature a. i and ii b. ii and iii c. i and iii d. iii and iv

Last Answer : c. i and iii 

The association of histone H1 with a nucleosome indicates that (a) DNA replication is occurring (b) the DNA is condensed into a chromatin fibre (c) the DNA double helix is exposed (d) transcription is occurring.

Description : The association of histone H1 with a nucleosome indicates that (a) DNA replication is occurring (b) the DNA is condensed into a chromatin fibre (c) the DNA double helix is exposed (d) transcription is occurring.

Last Answer : (b) the DNA is condensed into a chromatin fibre

The association of histone H1 with a nucleosome indicates: (1) DNA replication is occurring. (2) The DNA is condensed into a Chromatin Fibre. (3) The DNA double helix is exposed. (4) Transcription is occurring.

Description : The association of histone H1 with a nucleosome indicates: (1) DNA replication is occurring. (2) The DNA is condensed into a Chromatin Fibre. (3) The DNA double helix is exposed. (4) Transcription is occurring.

Last Answer : (2) The DNA is condensed into a Chromatin Fibre.

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/(D) 1.71 Cd × L × H 3/

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

Consider f(N) = g(N) + h(N) Where function g is a measure of the cost of getting from the start node to the current node N and h is an estimate of additional cost of getting from the current node N to the goal node. Then f(N) = h(N) is used in which one of the following algorithms ? (A) A* algorithm (B) AO* algorithm (C) Greedy best first search algorithm (D) Iterative A* algorithm

Description : Consider f(N) = g(N) + h(N) Where function g is a measure of the cost of getting from the start node to the current node N and h is an estimate of additional cost of getting from the current ... ? (A) A* algorithm (B) AO* algorithm (C) Greedy best first search algorithm (D) Iterative A* algorithm

Last Answer : (C) Greedy best first search algorithm

Fexofenadine differs from terfenadine in that: A. It undergoes high first pass metabolism in liver B. It is a prodrug C. It does not block cardiac delayed rectifier K+ channels D. It has high affinity for central H1 receptors

Description : Fexofenadine differs from terfenadine in that: A. It undergoes high first pass metabolism in liver B. It is a prodrug C. It does not block cardiac delayed rectifier K+ channels D. It has high affinity for central H1 receptors

Last Answer : C. It does not block cardiac delayed rectifier K+ channels

Using what, data hiding in encrypted images be carried out in digital forensics? A. Acquisition. B.Steganogrhy. C. Liveanalysis D. Hashing

Description : Using what, data hiding in encrypted images be carried out in digital forensics? A. Acquisition. B.Steganogrhy. C.Liveanalysis D. Hashing

Last Answer : B.Steganogrhy.

What is called as the process of creation a duplicate of digital media for purpose of examining it? A. Acquisition. B. Steganography. C. Live analysis D. Hashing.

Description : What is called as the process of creation a duplicate of digital media for purpose of examining it? A. Acquisition. B. Steganography. C. Live analysis D. Hashing.

Last Answer : Acquisition.

Validate your tools and verify your evidence with ____ to ensure its integrity a. hashing algorithms c. steganography b. watermarks d. digital certificates

Description : Validate your tools and verify your evidence with ____ to ensure its integrity a. hashing algorithms c. steganography b. watermarks d. digital certificates

Last Answer : a. hashing algorithms

Validate your tools and verify your evidence with to ensure its integrity (a) Hashing algorithms (b) Steganography (c) Watermark (d) Digital certificates

Description : Validate your tools and verify your evidence with to ensure its integrity (a) Hashing algorithms (b) Steganography (c) Watermark (d) Digital certificates

Last Answer : (a) Hashing algorithms

By encryption of a text we mean a. compressing it b. expanding it c. scrambling it to preserve its security d. hashing it

Description : By encryption of a text we mean a. compressing it b. expanding it c. scrambling it to preserve its security d. hashing it

Last Answer : c. scrambling it to preserve its security 

Using what, data hiding in encrypted images be carried out in digital forensics? A. Acquisition. B. Steganography. C. Live analysis D. Hashing

Description : Using what, data hiding in encrypted images be carried out in digital forensics? A. Acquisition. B. Steganography. C. Live analysis D. Hashing

Last Answer : B. Steganography.