What is the difference between the Hummer H2 and H1?

What is the difference between the Hummer H2 and H1?
by

1 Answer

Answer :

The H1 is the original Hummer or Humvee, based on the military model. The H2 was introduced as a more consumer-friendly model, based on the Chevy Suburban body frame. It's narrower, but slightly longer and taller than the H1. They both share the distinctive Humvee grille design.
by

Related questions

What is the gas mileage for a Hummer H1?

Description : What is the gas mileage for a Hummer H1?

Last Answer : The gas mileage will be different base on the year of the Hummer H1 and how you drive. The average for the Hummer in the city is 12 MPG and for the highway it is 10 MPG.

How much does a new Hummer H2 cost?

Description : How much does a new Hummer H2 cost?

Last Answer : The basic Hummer H2 will cost you around $61,585 - $63,090. The price can go up depending on which model you want, and if you would like to add any features to the vehicle.

What is the definition of rc hummer h2?

Description : What is the definition of rc hummer h2?

Last Answer : The defintion of an RC HUMMER H2 is a toy radio controlled Hummer H2. A Hummer H2 is a large SUV resembling the Hummer tanks that they use in the army. It is actually the 2nd Hummer that was manufactured and although the Hummer H2 is smaller than the first one it is still very large.

A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Description : A ball is allowed to fall freely from a height of 3 metres on to a fixed plate. If the successive rebound heights are h1, h2, h3 a.5 metres b.4.25 metre c.0.5 metre d.1 metre e.Zero

Last Answer : a. 5 metres

Smooth muscle relaxation is due to stimulation of which type of histamine receptors (a) H1 (b) H2 (c) H3 (d) All of the above

Description : Smooth muscle relaxation is due to stimulation of which type of histamine receptors (a) H1 (b) H2 (c) H3 (d) All of the above

Last Answer : Ans: B

The capacity of an antihistaminic to produce sedation depends on the following except (a) Relative affinity for central versus peripheral H1 receptors (b) Ability to penetrate blood-brain barrier (c) Individual susceptibility (d) Ratio of H1 : H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except (a) Relative affinity for central versus peripheral H1 receptors (b) Ability to penetrate blood-brain barrier (c) Individual susceptibility (d) Ratio of H1 : H2 blockade produced by the drug

Last Answer : Ans: D

Fall in blood pressure caused by larger doses of histamine is blocked by (a) H1 antihistaminics alone (b) H2 ANTAgonists alone (c) Combination of H1 and H2 antagonists (d) None of the above

Description : Fall in blood pressure caused by larger doses of histamine is blocked by (a) H1 antihistaminics alone (b) H2 ANTAgonists alone (c) Combination of H1 and H2 antagonists (d) None of the above

Last Answer : Ans: C

Diamprit is an agonist of ______ receptors, except (a) H1 (b) H2 (c) H3 (d) All of the above

Description : Diamprit is an agonist of ______ receptors, except (a) H1 (b) H2 (c) H3 (d) All of the above

Last Answer : Ans: A

When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of the process (humidification or dehumidification) then, the sensible heat factor (H2 – H1) / (H3 – H1) represents the process of A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Description : When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of ... A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Last Answer : ANSWER : C

The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Last Answer : Answer: B

As shown in the illustration, 'H1' and 'H2' are ___________. EL-0058 A. fixed capacitors B. variable capacitors C. contacts, closed when the circuit is energized D. contacts, open when the circuit is energized

Description : As shown in the illustration, 'H1' and 'H2' are ___________. EL-0058 A. fixed capacitors B. variable capacitors C. contacts, closed when the circuit is energized D. contacts, open when the circuit is energized

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Last Answer : Answer: B

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Last Answer : Answer: A

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Last Answer : Answer: B

The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Description : If h1 = inner film co-efficient and /h2 = outer film co-efficient, then the overall heat transfer co-efficient is (A) Always less than h1 (B) Always between h1 and h2 (C) Always higher than h2 (D) Dependent on metal resistance

Last Answer : (B) Always between h1 and h2

The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Last Answer : (C) H5/2

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2

In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Description : In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller

Last Answer : A) Mechanical

The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. The total height of confined aquifer H is given by (A) H = h2 - h1 (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Description : The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. ... (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Last Answer : Answer: Option D

The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of discharge) (A) Q = (2/3) Cd × b × (2g) × (H2 - H1) (B) Q = (2/3) Cd × b × (2g) × (H2 1/2 - H1 1/2) (C) Q = (2/3) Cd × b × (2g) × (H2 3/2 - H1 3/2) (D) Q = (2/3) Cd × b × (2g) × (H2 2 - H1 2 )

Description : The discharge through a large rectangular orifice is given by (where H1 = Height of the liquid above the top of the orifice, H2 = Height of the liquid above the bottom of the orifice, b = Breadth of the orifice, and Cd = Coefficient of ... H1 3/2) (D) Q = (2/3) Cd b (2g) (H2 2 - H1 2 )

Last Answer : Answer: Option C

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Description : A 1-kg steam-water mixture at 1.0 MPa is contained in an inflexible tank. Heat is added until the pressure rises to 3.5 MPa and the temperature to 400°. Determine the heat added.  a) 1378.7 kJ  b) 1348.5 kJ  c) 1278,7 kJ  d) 1246,5 kJ Formula: Q = (h2 – p2v2) –(h1 –p1v1)

Last Answer : 1378.7 kJ

The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Last Answer : D. Ratio of H1:H2 blockade produced by the drug

Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Description : Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Last Answer : C. Combination of H1 and H2 antagonists

The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Description : The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Last Answer : D. GABA-benzodiazepine receptor

The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Description : The capacity of an antihistaminic to produce sedation depends on the following except: A. Relative affinity for central versus peripheral H1 receptors B. Ability to penetrate blood-brain barrier C. Individual susceptibility D. Ratio of H1:H2 blockade produced by the drug

Last Answer : D. Ratio of H1:H2 blockade produced by the drug

Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Description : Fall in blood pressure caused by larger doses of histamine is blocked by: A. H1 antihistaminics alone B. H2 antagonists alone C. Combination of H1 and H2 antagonists D. None of the above

Last Answer : C. Combination of H1 and H2 antagonists

The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Description : The following receptor has an intrinsic ion channel: A. Histamine H1 receptor B. Histamine H2 receptor C. Adrenergic alfa receptor D. GABA-benzodiazepine receptor

Last Answer : D. GABA-benzodiazepine receptor

The hash function used in double hashing is of the form: (A) h(k, i)=(h1(k)+h2(k)+i)mod m (B) h(k, i)=(h1(k)+h2(k)-i)mod m (C) h(k, i)=(h1(k)+ih2(k))mod m (D) h(k, i)=(h1(k)-ih2(k))mod m

Description : The hash function used in double hashing is of the form: (A) h(k, i)=(h1(k)+h2(k)+i)mod m (B) h(k, i)=(h1(k)+h2(k)-i)mod m (C) h(k, i)=(h1(k)+ih2(k))mod m (D) h(k, i)=(h1(k)-ih2(k))mod m

Last Answer : Answer: C

What is the difference between the hummer and the hummer h3?

Description : What is the difference between the hummer and the hummer h3?

Last Answer : The H3 is a smaller version of the traditional Hummer. The H3 has beter fuel economy and is more geared for urban life when comared to the traditional hummer.

The last Hummer has been manufactured. How do you feel about it?

Description : The last Hummer has been manufactured. How do you feel about it?

Last Answer : I’m fine with it. We don’t need the gas guzzlers on the road.

What do you think are the reasons behind Beijing denying the sale of Hummer to a Chinese company?

Description : What do you think are the reasons behind Beijing denying the sale of Hummer to a Chinese company?

Last Answer : Since the Chinese government obviously could care less about their environmental pollution, I would say there must be more to it.

What is the purpose of driving a Hummer if you're not in the military?

Description : What is the purpose of driving a Hummer if you're not in the military?

Last Answer : Two words: Nature Photography. My college photography professor does wedding portraits and nature stuff. After killing two Land Rovers or Land Rangers or something that were supposed to be totally unkillable ... hardy vehicle. She's really pleased with it-apparently it really can just go anywhere.

The attraction of Hummer brands - Why do people own and drive SUVs in densely populated areas where all-terrain handling is not required?

Description : The attraction of Hummer brands - Why do people own and drive SUVs in densely populated areas where all-terrain handling is not required?

Last Answer : because hummers=awesome in todays mainstream media. If you have one, you are considered in a whole other group from everyone else. The types of people that have money and can afford to fill up everytime they want to leave their house group.

What is the gas mileage of the H3 Hummer?

Description : What is the gas mileage of the H3 Hummer?

Last Answer : The H3 Hummer model features the following gas mileage statistic ratings dependant upon exact model. For the 5 cylinder automatic model the vehicle is rated at 14 mpg city and 18 mpg highway, the 5 speed manual ... highway. The 8 cylinder model of the H3 is rated at 13 mpg city and 16 mpg highway.

What is meant by central tire inflation system on models like the Hummer?

Description : What is meant by central tire inflation system on models like the Hummer?

Last Answer : Within a central tire inflation system, a driver adjusts the settings governing an electronic control unit, which manipulates the tire valves to increase or decrease air pressure in order to improve tire performance on varying terrains.

Would Craigslist be a good place to sell a Hummer for sale?

Description : Would Craigslist be a good place to sell a Hummer for sale?

Last Answer : We have been told one of the best sites to list our Hummer for sale is Craigslist. However I have been told that might not be the way to to. I am in need to find this out if anyone can let me know.

Identify the picture. a) Hummer mill type b) Spike-tooth type c) Dummy type d) Axial flow type

Description : Identify the picture. a) Hummer mill type b) Spike-tooth type c) Dummy type d) Axial flow type

Last Answer : Hummer mill type

are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Description : are mounted on the Periphery of a cylinder that rotates inside a closed casing and concave. a) Dummy type c) spike-tooth type b) Hummer type d) Axial flow type

Last Answer : spike-tooth type

t consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Description : It consists of spike tooth cylinder, woven- wire mesh concave and upper casing provided with helical concave. a) Dummy type c) Spike-tooth type b) Hummer type d) Axial flow type

Last Answer : Axial flow type

It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Description : It consists of beats mounted on a shaft which rotates inside a closed casing and concave. a) Dummy type c) Spike-tooth type c) Hummer type d) Axial flow type

Last Answer : Dummy type

Write the difference between <H1> and <H6> heading tags. -Technology

Description : Write the difference between and heading tags. -Technology

Last Answer : provides six levels of headings. is the largest heading level while is the smallest heading level. These headings help us in obtaining a uniform look and feel for the document.

What is the purpose of using the tags <H1>…<H6>? -Technology

Description : What is the purpose of using the tags …? -Technology

Last Answer : provides six levels of headings. is the largest heading level while is the smallest heading level. These headings help us in obtaining a uniform look and feel for the document.

<h1>Prepare to Boost Your Career</h1>?

Description : Prepare to Boost Your Career?

Last Answer : In a tough economic market, pursuing an advanced degree can help accent the skills of any potential applicant. Sitting for the Graduate Record Examination (GRE) is often a standard part of pursuing an ... fee based programs that can provide this service, or hard copy books can provide the same.

The most important receptor involved in cytotoxic drug induced vomiting is (a) Histamine H1 receptor (b) Serotonin 5-HT3 receptor (c) Dopamine D2 receptor (d) Opioid µ receptor

Description : The most important receptor involved in cytotoxic drug induced vomiting is (a) Histamine H1 receptor (b) Serotonin 5-HT3 receptor (c) Dopamine D2 receptor (d) Opioid µ receptor

Last Answer : Ans: B

H1 antihistaminics are beneficial in (a) All types of allergic disorders (b) Certain type I allergic reactions only (c) Anaphylactic shock(d) Bronchial asthma

Description : H1 antihistaminics are beneficial in (a) All types of allergic disorders (b) Certain type I allergic reactions only (c) Anaphylactic shock(d) Bronchial asthma

Last Answer : Ans: B

Select the H1 antihistaminic which is used topically in the nose for allergic rhinitis (a) Deep intra-abdominal operation (b) Trachial intubation (c) Tetanus (d) Diagonosis of myasthenia gravis

Description : Select the H1 antihistaminic which is used topically in the nose for allergic rhinitis (a) Deep intra-abdominal operation (b) Trachial intubation (c) Tetanus (d) Diagonosis of myasthenia gravis

Last Answer : Ans: D