How current should I change my furnace filter and clean it?

How current should I change my furnace filter and clean it?
by

1 Answer

Answer :

You should wait 1-2 years before changing your furnace filters. You always want it to be dust free so that way no fires can be started unintentionally.
by

Related questions

How to Change a Furnace Filter ?

Description : How to Change a Furnace Filter ?

Last Answer : How to Change a Furnace Filter Every device in your home that has something to do with cooling, heating, or ventilation must be kept clean. Your home furnace filters help in improving the quality of the ... every 3-4 months. With these steps, you can easily replace the furnace filter in your home.

Can I rinse and reuse a furnace air filter?

Description : Can I rinse and reuse a furnace air filter?

Last Answer : answer:It was probably filthy just a few days after you started using it ...You purchased this hyper-expensive air filter for a specific reason. This high performance allergen air filter was ... try and tip the scales to decrease the allergens. Attempting to clean the filter is self defeating.

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

It's 10F out before windchill, and I have no heat, exactly how do I "clean" my furnace?

Description : It's 10F out before windchill, and I have no heat, exactly how do I "clean" my furnace?

Last Answer : If I were you I’d get into a nice zero degree sleeping bag and wait for help.

How to Clean an Oil Furnace Heat Exchanger?

Description : How to Clean an Oil Furnace Heat Exchanger?

Last Answer : If you have a heat exchanger within your oil furnace, you probably know that it is of vital importance that you must regularly clean out the buildup of soot inside of it. You should probably do ... the manual which came with your oil furnace, a small brush that has stiff feeling bristles, a flashli

Can I clean the air filter by soaking it in gasoline and drying it?

Description : Can I clean the air filter by soaking it in gasoline and drying it?

Last Answer : I’m not sure , but you shouldn’t play with flammables if you are not sure what you are doing. We don’t want to see you hurt.

Within, I clean all that is bad and is old. I make juice that's the color of gold. Should I die, a filter machine would you need assembled To replace me, and beans I resemble.What am I? -Riddles

Description : Within, I clean all that is bad and is old. I make juice that's the color of gold. Should I die, a filter machine would you need assembled To replace me, and beans I resemble.What am I? -Riddles

Last Answer : A kidney.

The fuel air ratio in a petrol engine fitted with suction carburetor, operating with dirty air filter as compared to clean filter will be A. higher B. lower C. remain unaffected D. unpredictable

Description : The fuel air ratio in a petrol engine fitted with suction carburetor, operating with dirty air filter as compared to clean filter will be A. higher B. lower C. remain unaffected D. unpredictable

Last Answer : ANSWER : A

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Description : In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Last Answer : (B) Induction and resistance

The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc(B) Resistance(C) Low frequency induction(D) High frequency induction

Description : The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc (B) Resistance (C) Low frequency induction (D) High frequency induction

Last Answer : (D) High frequency induction

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. (A) Indirect induction over (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Description : In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... ) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : Ans: D Magnetic property of alloy changes with change of the temperature and Heat is produced due to eddy current = i2R and i α f2

The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of gases in the furnace (mixing by induction, by acceleration or by change of direction) (D) All (A), (B) and (C)

Description : The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of ... , by acceleration or by change of direction) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Circulation of gases in furnace is caused by the (A) Change in volume during a change of temperature (B) Difference in density between hot and cold gases (C) Furnace pressure in conjunction with draft in flues(D) All (A), (B) and (C

Description : Circulation of gases in furnace is caused by the (A) Change in volume during a change of temperature (B) Difference in density between hot and cold gases (C) Furnace pressure in conjunction with draft in flues (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Description : In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Last Answer : (A) Increases the reducing potential of the gas

Do my angelfish need an airstone when I have a hang-on the back filter with a strong current?

Description : Do my angelfish need an airstone when I have a hang-on the back filter with a strong current?

Last Answer : I turned off the bubbler and they seem to be swimming more freely.

The illustrated device is a _______. EL-0064 A. full wave bridge rectifier B. half wave bridge rectifier C. solid state voltage regulator D. direct current (DC) filter

Description : The illustrated device is a _______. EL-0064 A. full wave bridge rectifier B. half wave bridge rectifier C. solid state voltage regulator D. direct current (DC) filter

Last Answer : Answer: A

What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

Is an RC filter used when a large current or a small current demand is required?

Description : Is an RC filter used when a large current or a small current demand is required?

Last Answer : Small.