What grade is 35 out of 45?

What grade is 35 out of 45?
by

1 Answer

Answer :

As a percentage it is 77.'7'% repeating '7'
by

Related questions

Grade A eggs are of — gm. Weight ? a. 35 to 40 b. 40 to 45 c. 45 to 50 d. 50 to 53

Description : Grade A eggs are of — gm. Weight ? a. 35 to 40 b. 40 to 45 c. 45 to 50 d. 50 to 53

Last Answer : d. 50 to 53

If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Description : If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Last Answer : Answer: Option B

Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Description : Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Last Answer : [ A ] 0.2

Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Description : Minimum percentage of tension steel for a singly reinforced section Fe415 grade is [ A ] 0.2 [ B ] 0.35 [ C ] 2 [ D ] 3.5

Last Answer : [ A ] 0.2

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km(B) 60 m per km (C) 75 m per km (D) 90 m per km

Description : An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km (B) 60 m per km (C) 75 m per km (D) 90 m per km

Last Answer : Answer: Option B

The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Description : The compression in steel (fS) at failure for Fe - 415 grade steel using stress-strain curve shall be [ A ] 0.87 fy [ B ] 0.75 fy [ C ] 0.45 fy [ D ] 0.55 fy

Last Answer : [ B ] 0.75 fy

Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Description : Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Last Answer : [ B ] 30 mm

Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Description : Nominal cover for M30 grade concrete in moderate exposure is (as per IS:456-2000) [ A ] 20 mm [ B ] 30 mm [ C ] 45 mm [ D ] 50 mm

Last Answer : [ B ] 30 mm

On a test consisting of 500 questions, Dhivya answered 80% of the first 250 questions correctly. What percent of the other 250 questions does she need to answer correctly for her grade on the entire exam to be 60% ? a) 20 b) 60 c) 45 d) 80 e) 40

Description : On a test consisting of 500 questions, Dhivya answered 80% of the first 250 questions correctly. What percent of the other 250 questions does she need to answer correctly for her grade on the entire exam to be 60% ? a) 20 b) 60 c) 45 d) 80 e) 40

Last Answer : Answer: E  60% of 500 = 300  80% of 250 = 200 No. of correct answers in remaining 250 questions = 300 – 200  = 100  Percentage = 100 x 100/ 250  = 40%

Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85

Description : Out of 100 kcal/second of incident radiant energy on the surface of a thermally transparent body, 300 kcal/second is reflected back. If the transmissivity of the body is 0.25, the emissivity of the surface will be (A) 0.35 (B) 0.45 (C) 0.55 (D) 0.85

Last Answer : (B) 0.45

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Last Answer : answer:

The marks obtained by 15 students in an examination are given below : 40, 20, 24, 19,20, 35, 12, 48, 29, 40, 45, 48, 42, 23, 35. Find the average mark

Description : The marks obtained by 15 students in an examination are given below : 40, 20, 24, 19,20, 35, 12, 48, 29, 40, 45, 48, 42, 23, 35. Find the average mark

Last Answer : The marks obtained by 15 students in an examination are given below : 40, 20, 24, 19,20, 35, 12, ... , 23, 35. Find the average mark of the students.

The mean of 20, 40, 35, 42, and 45 is ____.

Description : The mean of 20, 40, 35, 42, and 45 is ____.

Last Answer : The mean of 20, 40, 35, 42, and 45 is ____.

When a client has been drinking fluids how long do you wait before taking an oral temperature A. 10-15 minutes B. 35-45 minutes C. 5-10 minutes D. 1-5 minutes?

Description : When a client has been drinking fluids how long do you wait before taking an oral temperature A. 10-15 minutes B. 35-45 minutes C. 5-10 minutes D. 1-5 minutes?

Last Answer : Need answer

What is 45.35 round to the nearest whole number?

Description : What is 45.35 round to the nearest whole number?

Last Answer : The answer is 50.00

What is HCF of 35 and 45?

Description : What is HCF of 35 and 45?

Last Answer : The GCF is 5.

I need a computer desk for my dorm, and was wondering if any are smaller than 45" x 35" X 40"?

Description : I need a computer desk for my dorm, and was wondering if any are smaller than 45" x 35" X 40"?

Last Answer : The Techni Mobili Glass & Steel Ergonomic Computer Desk is small or you could look at kids desks.

BMR of healthy adult men is about (A) 30 kcal/hour/square metre (B) 35 kcal/hour/square metre (C) 40 kcal/hour/square metre (D) 45 kcal/hour/square metre

Description : BMR of healthy adult men is about (A) 30 kcal/hour/square metre (B) 35 kcal/hour/square metre (C) 40 kcal/hour/square metre (D) 45 kcal/hour/square metre

Last Answer : Answer : C

Daily output of urea in grams is (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 35 to 45

Description : Daily output of urea in grams is (A) 10 to 20 (B) 15 to 25 (C) 20 to 30 (D) 35 to 45

Last Answer : Answer : C

Menopause usually occurs between (a) 30 and 35 years (b) 35 and 40 years (c) 40 and 45 years (d) 45 and 50 years

Description : Menopause usually occurs between (a) 30 and 35 years (b) 35 and 40 years (c) 40 and 45 years (d) 45 and 50 years

Last Answer : Ans:(d)

Acidosis is the condition in which the blood pH is abnormally low. Alkalosis is the condition in which the blood pH is abnormally high. Normal pH levels for the human blood are between 7.35 and 7.45 - slightly alkaline.

Description : Acidosis is the condition in which the blood pH is abnormally low. Alkalosis is the condition in which the blood pH is abnormally high. Normal pH levels for the human blood are between 7.35 and 7.45 - slightly alkaline.

Last Answer : How does the breathing process correct acidosis?

The upper limit of investment in plant and machinery for small-scale industries has been fixed currently at - (1) Rs. 35 lakhs (2) Rs. 45 lakhs (3) Rs. 60 lakhs (4) Rs. 1 crore

Description : The upper limit of investment in plant and machinery for small-scale industries has been fixed currently at - (1) Rs. 35 lakhs (2) Rs. 45 lakhs (3) Rs. 60 lakhs (4) Rs. 1 crore

Last Answer : (4) Rs. 1 crore Explanation: The upper limit of investment in plant and machinery for small-scale industries has been fixed at Rs. one crore.

Acceptable "Noise Pollution Level" in India range between: (1) 16 - 35 db (2) 40 - 45 db (3) 70 - 100 db (4) 10 - 15 db

Description : Acceptable "Noise Pollution Level" in India range between: (1) 16 - 35 db (2) 40 - 45 db (3) 70 - 100 db (4) 10 - 15 db

Last Answer : (2) 40 - 45 db Explanation: According to the noise pollution rules, the permissible noise level during the day is 50dB in silence zones, 55dB in residential areas, 65 dB in commercial areas and 75 ... areas, commercial areas and industrial areas are respectively 40 dB, 45 dB, 55 dB and 70 dB.

The least distance of distinct vision is – (1) 35 cm (2) 25 cm (3) 45 cm (4) 15 cm

Description : The least distance of distinct vision is – (1) 35 cm (2) 25 cm (3) 45 cm (4) 15 cm

Last Answer : (2) 25 cm Explanation: Least distance of distinct vision is the minimum object's distance that is able to produce a distinct image on the retina. This distance is about 25 cm from the eye. However, it varies with age. For infants the least distance of distinct vision is about 5 to 8 cm.

How many remittances can be received by a single individual beneficiary under the scheme during a year? A. 40 B. 45 C. 40 D. 35 E. 30

Description : How many remittances can be received by a single individual beneficiary under the scheme during a year? A. 40 B. 45 C. 40 D. 35 E. 30

Last Answer : E. 30 Explanation: Thirty remittances can be received by a single individual beneficiary under the scheme during a calendar year.

A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Description : A sewer pipe contains 1 mm sand particles of specific gravity 2.65 and 5 mm organic particles of specific gravity 1.2, the minimum velocity required for removing the sewerage, is A. 0.30 m/sec B. 0.35 m/sec C. 0.40 m/sec D. 0.45 m/sec

Last Answer : ANS: D

Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Description : Diesel used in naval applications has a minimum cetane number of (A) 25 (B) 35 (C) 45 (D) 65

Last Answer : (C) 45

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

The contribution of Agricultural sector to the gross domestic product (GDP) in India in the year 2004-05 has been nearly (A) 25 % (B) 45 % (C) 35 % (D) 55 %

Description : The contribution of Agricultural sector to the gross domestic product (GDP) in India in the year 2004-05 has been nearly (A) 25 % (B) 45 % (C) 35 % (D) 55 %

Last Answer : (A) 25 %

One gram of glucose produces how much fat or oil (A) 0.25 g (B) 0.35 g (C) 0.45 g (D) 0.32 g

Description : One gram of glucose produces how much fat or oil (A) 0.25 g (B) 0.35 g (C) 0.45 g (D) 0.32 g

Last Answer : (C) 0.45 g

The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

Last Answer : [a] 40-45 degree

Where the intensity of dust is not severe generally pre- cleaners a placed above the tractor hood about a) 35 cm b) 40 cm c) 45 cm d) 50 cm

Description : Where the intensity of dust is not severe generally pre- cleaners a placed above the tractor hood about a) 35 cm b) 40 cm c) 45 cm d) 50 cm

Last Answer : a) 35 cm

Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Description : Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Last Answer : (c) 55 D.A.S.

Under non medical scheme the age at entry of proponent should not exceed a) 35 years b) 40 years c) 45 years d) No limit

Description : Under non medical scheme the age at entry of proponent should not exceed a) 35 years b) 40 years c) 45 years d) No limit

Last Answer : a) 35 years

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

In Groundnut pegging stage comes after — DAS a. 35 b. 45 c. 55 d. 65

Description : In Groundnut pegging stage comes after — DAS a. 35 b. 45 c. 55 d. 65

Last Answer : c. 55

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

The height of a water column equivalent to a pressure of 0.15 MPa is (A) 15.3 m (B) 25.3 m (C) 35.3 m (D) 45.3 m

Description : The height of a water column equivalent to a pressure of 0.15 MPa is (A) 15.3 m (B) 25.3 m (C) 35.3 m (D) 45.3 m

Last Answer : The height of a water column equivalent to a pressure of 0.15 MPa can be calculated using the hydrostatic equation: Pressure (P) = Density of water (rho) * Acceleration due to gravity (g) * Height (h) ... s^2) = 0.15 m Therefore, the height of the water column would be approximately 0.15 meters.

Depth of borings for soil investigation, is generally kept below low water level (A) 30 m (B) 35 m (C) 45 m (D) 40 m

Description : Depth of borings for soil investigation, is generally kept below low water level (A) 30 m (B) 35 m (C) 45 m (D) 40 m

Last Answer : (C) 45 m

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Description : The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Last Answer : Answer: Option C

In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 m

Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm

Last Answer : Answer: Option B

Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Last Answer : Ans - b. 42-45 °

In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Description : In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Last Answer : Ans -   a. 15-25°