How much does furnace installation usually cost?

How much does furnace installation usually cost?
by

1 Answer

Answer :

The average cost for installation on a furnace is about $1000-$2000. The actual furnace can cost you between $900-$1500.
by

Related questions

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

How long does it take an HVAC company to do a furnace installation?

Description : How long does it take an HVAC company to do a furnace installation?

Last Answer : The time required to install a furnace depends entirely on the extent and difficulty of the job. A straightforward residential installation with existing ductwork can take 2 hours or less, while ... furrnance installitions take about 4 hours. This can vary depending on the furnance being installed.

In the 1950s, there were perhaps four consumer products that were status symbols in China—the wristwatch, the sewing machine, the radio, and one more, usually manufactured by the Forever company from Shanghai. There is an Ai Wei Wei installation that bears this company’s name

Description : In the 1950s, there were perhaps four consumer products that were status symbols in China—the wristwatch, the sewing machine, the radio, and one more, usually manufactured by the Forever company from Shanghai. There is an Ai Wei Wei installation that bears this company’s name

Last Answer : Bicycles.

The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore

Last Answer : Limestone, coke & iron ore

How much should a complete drip irrigation system cost with parts and installation?

Description : How much should a complete drip irrigation system cost with parts and installation?

Last Answer : Need Answer

How much is the avg. gas fireplace installation cost in the U.S.?

Description : How much is the avg. gas fireplace installation cost in the U.S.?

Last Answer : The average gas fireplace installation cost is about $500. It is cheaper than a wood burning foreplace installation.

How much does heating stove installation cost?

Description : How much does heating stove installation cost?

Last Answer : It depend on what kind of heating stove you want. They range from couple hundreds dollars to couple thousands of dollars and money to hire professional to do it also.

How much does installation of wide plank flooring cost?

Description : How much does installation of wide plank flooring cost?

Last Answer : The cost of installing flooring can vary between installers, and depends on the amount needing to be installed. It is best to choose several reputable installers and get estimates from each company.

What is the typical cost of installation of an electric garage door opener?

Description : What is the typical cost of installation of an electric garage door opener?

Last Answer : From what I gather, a typical cost of an electric garage door opener is around $150. However, with installation, it could run you a total cost of about $350 or so.

What is the typical cost of installation of a garbage disposer unit?

Description : What is the typical cost of installation of a garbage disposer unit?

Last Answer : The cost of installation will be directly related to the cost of living in your area. If you go through one of the large home improvement stores to buy the disposal, you can likely add installation for ... - $500, depending on your location, the unit you choose, and whether the wiring is in place.

What is the price of carpet installation cost?

Description : What is the price of carpet installation cost?

Last Answer : Many companies will wave the installation fee if you buy carpet through them. If you decide to have someone else install it, you could expect to pay about $4.00 per square yard for the carpet, and another $.50 for foam installation.

The two biggest factors that come into play when determining your specific, carpet installation cost, is both the type of carpet you choose, and the retailer/installer you choose for the purchasing an?

Description : The two biggest factors that come into play when determining your specific, carpet installation cost, is both the type of carpet you choose, and the retailer/installer you choose for the purchasing an?

Last Answer : Yes it is important. We should consider both cost as well as the retailer/installer. Because the installer will be the one who will later provide the maintenance to the work.

Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Last Answer : (B) Venturimeter

'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Description : 'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Last Answer : (B) Equipment cost by scaling

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Last Answer : C. the total power available minus the attenuation losses

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

How often should furnace duct cleaning be done and how much does it cost?

Description : How often should furnace duct cleaning be done and how much does it cost?

Last Answer : I heard that you should have ducts cleaned but I don't know how often. How often should furnace duct cleaning be done and how much does it cost?

Is central heating in a four room house more cost effective than a wood furnace?

Description : Is central heating in a four room house more cost effective than a wood furnace?

Last Answer : Wood is fairly expensive. It can be if you can cut your own wood though.

Whats the cost difference in running a natural gas furnace compared to an electric furnace?

Description : Whats the cost difference in running a natural gas furnace compared to an electric furnace?

Last Answer : This is a tricky question. Some homes may not have a gas line. Some cities may not allow gas furnaces and thus only electric is possible. Check with a local heating specialist for information.

Cost of a wood burning furnace?

Description : Cost of a wood burning furnace?

Last Answer : A wood burning furnace installed will run you a few thousand dollars and as much as four or five thousand dollars. That being said your heat bill will be cut down to almost nothing and you can probably get a rebate on your taxes for getting a energy efficient appliance.

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Description : Low grade phosphate rock can be used in electrical furnace, because (A) Of the better CaO/SiO2 balance for slag formation (B) CaO content is less (C) It is cheap (D) It produces low cost product

Last Answer : (A) Of the better CaO/SiO2 balance for slag formation