In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost
(B) 3-10% of fixed capital investment
(C) Either (A) or (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Either (A) or (B)
by

Related questions

Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost (C) Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Description : Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate ... chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Last Answer : (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

Vignesh purchased a TV set for Rs.11, 250 after getting discount of 10% on the labelled price. He spent Rs.150 on transport and Rs.800 on installation. At what price should it be sold so that the profit earned would have been 15% if no discount was offered? a) Rs.11877.50 b) Rs.16367.50 c) Rs.14247.50 d) Rs.15467.50 e) Rs.17567.50

Description : Vignesh purchased a TV set for Rs.11, 250 after getting discount of 10% on the labelled price. He spent Rs.150 on transport and Rs.800 on installation. At what price should it be sold so that the profit earned would have ... a) Rs.11877.50 b) Rs.16367.50 c) Rs.14247.50 d) Rs.15467.50 e) Rs.17567.50

Last Answer : Marked price = 11250 × 10/9 = Rs. 12500 Total cost=12500 + 150 + 800=Rs. 13450 S.P = 13450 × 115/100 = Rs. 15467.50 Answer: d)

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

The total investment in a project is Rs. 10 lakhs and the annual profit is 1.5 lakhs. If the project life is 10 years, then the simple rate of return on investment is (A) 15% (B) 10% (C) 1.5% (D) 150%

Description : The total investment in a project is Rs. 10 lakhs and the annual profit is 1.5 lakhs. If the project life is 10 years, then the simple rate of return on investment is (A) 15% (B) 10% (C) 1.5% (D) 150%

Last Answer : (C) 1.5%

The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Description : The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Last Answer : (B) Working capital

'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Description : 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Last Answer : C) 4.2 to 4.4

Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment. (A) 4 (B) 13 (C) 22 (D) 34

Description : Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment. (A) 4 (B) 13 (C) 22 (D) 34

Last Answer : (B) 13

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Sanki purchased 20 dozen notebook at Rs. 48 per dozen. He sold 8 dozen at 10% profit and remaining 12 dozen with 20% profit. What is his profit percentage in the transaction? A. 8% B. 15% C. 16% D. 19%

Description : Sanki purchased 20 dozen notebook at Rs. 48 per dozen. He sold 8 dozen at 10% profit and remaining 12 dozen with 20% profit. What is his profit percentage in the transaction? A. 8% B. 15% C. 16% D. 19% 

Last Answer : Answer – C (16%) Explanation – C.P of 20 dozen = Rs.(48 x 20) = Rs.960 C.P of 8 dozen = Rs. (48 x8) = Rs. 384. C.P of 12 dozen =Rs. (960 – 384) = Rs. 576 Total S.P = Rs. (110/100 x 384 +120/100 x 576) = Rs.1113.60 ∴ Profit % = (153.60/960 x 100)% =16%

A sells an article to B at 15% profit. B sells it to C at 10% loss. If C pays Rs 517.50 for it then A purchased it at: 1. Rs 500 2. Rs 750 3. Rs 1000 4. Rs 1250

Description : A sells an article to B at 15% profit. B sells it to C at 10% loss. If C pays Rs 517.50 for it then A purchased it at: 1. Rs 500 2. Rs 750 3. Rs 1000 4. Rs 1250

Last Answer : 1. Rs 500

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Description : A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B); depends on the type of catalyst

Which of the following is not a component of the fixed capital for a chemical plant facility? (A) Raw materials inventory (B) Utilities plants (C) Process equipment (D) Emergency facilities

Description : Which of the following is not a component of the fixed capital for a chemical plant facility? (A) Raw materials inventory (B) Utilities plants (C) Process equipment (D) Emergency facilities

Last Answer : (A) Raw materials inventory

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur with resultant loss of weight. When weight loss exceeds 10–15% of body weight, the complications of malnutrition interact with disease processes, with increased morbidity and mortality rates. The goal of nutritional support is maintenance of body cell mass and limitation of weight loss to less than 10% preinjury. The major impact of nutritional support in the trauma patient is to aid host defense. Under-nutrition may compromise the available host defense mechanism and may thus increase the likelihood of invasive sepsis, multiple organ system failure, and death. Resuscitation, oxygenation and arrest

Description : Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur ... requirements, caloric requirements should be distributed at a ratio of 70% as glucose and 30% as fat

Last Answer : Which of the following statement(s) is/are true concerning body fuel reserves? a. The largest fuel reserve in the body is skeletal muscle b. Fat provides about 9 calories/gram c. Free glucose and glycogen stores are a trivial fuel reserve d. Body protein is a valuable storage form of energy

XYZ Co, is having 15% share capital held by X Company and 50% held by Central Government and 10% held by State Government and 25% held by other people then that company will be A. Government Company B. Private Company C. Public Company D. None of these

Description : XYZ Co, is having 15% share capital held by X Company and 50% held by Central Government and 10% held by State Government and 25% held by other people then that company will be A. Government Company B. Private Company C. Public Company D. None of these

Last Answer : C. Public Company

Which of the following is a constituent of vinegar? (A) Around 10% alcohol (B) Around 1% acetic acid (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Which of the following is a constituent of vinegar? (A) Around 10% alcohol (B) Around 1% acetic acid (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

A machinery is purchased for Rs. 3,00,000 and Rs. 50,000 is spent on its installation. Rs. 5,000 is spent on fuel. What will be the amount of capital expenditure ? (A) Rs. 3,00,000 (B) Rs. 3,50,000 (C) Rs. 3,55,000 (D) None of these

Description : A machinery is purchased for Rs. 3,00,000 and Rs. 50,000 is spent on its installation. Rs. 5,000 is spent on fuel. What will be the amount of capital expenditure ? (A) Rs. 3,00,000 (B) Rs. 3,50,000 (C) Rs. 3,55,000 (D) None of these

Last Answer : Answer: Rs. 3,50,000

The contents of documents may be proved a) By primary evidence b) By secondary evidence c) Either A or B d) Neither A nor B

Description : The contents of documents may be proved  a) By primary evidence b) By secondary evidence c) Either A or B d) Neither A nor B

Last Answer : c) Either A or B

Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost. (A) 1 (B) 5 (C) 10 (D) 30

Description : Maximum production start up cost for making a chemical plant operational is about __________ percent of the fixed capital cost. (A) 1 (B) 5 (C) 10 (D) 30

Last Answer : (C) 10

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

Paresh purchased an I-pod for Rs. 7500 and sold it at the gain of 24%. From that amount he purchased another I-pod and sold it at the loss of 20%. What is his overall gain/loss? (a) Loss of Rs. 100 (b) Gain of Rs. 60 (c) Loss of Rs. 60 (d) Neither gain nor loss (e) Gain of Rs. 100

Description : Paresh purchased an I-pod for Rs. 7500 and sold it at the gain of 24%. From that amount he purchased another I-pod and sold it at the loss of 20%. What is his overall gain/loss? (a) Loss of Rs. 100 (b) Gain of Rs. 60 (c) Loss of Rs. 60 (d) Neither gain nor loss (e) Gain of Rs. 100

Last Answer : (c) Loss of Rs. 60

________ of depreciation calculation accounts for the interest on investment. (A) Straight line method (B) Declining balance (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : ________ of depreciation calculation accounts for the interest on investment. (A) Straight line method (B) Declining balance (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : D) Neither (A) nor (B)

In order that there may be a profit of 15% after allowing a discount of 10% on the marked price, The marked price of an book has to be increased by %?

Description : In order that there may be a profit of 15% after allowing a discount of 10% on the marked price, The marked price of an book has to be increased by %? 

Last Answer : Mp= Rs x Sp= 90x/100= 9x/10 Mp= 9x/10*100/115=18x/23 Mp has increased by (x-18x/23)/(18x/23)*100 =27.7%

The fixed cost on such factors of production which are neither hired nor bought by the firm is called - (1) social cost (2) opportunity cost (3) economic cost (4) surcharged cost

Description : The fixed cost on such factors of production which are neither hired nor bought by the firm is called - (1) social cost (2) opportunity cost (3) economic cost (4) surcharged cost

Last Answer : (1) social cost Explanation: Social cost is defined as a sum of the private cost and external costs. The social cost is generally not borne by an individual. It may be borne by entire society, city or ... seller sells any product or item to buyer. This cost is added up from the use of that product.

The fixed cost on such factors of production which are neither hired nor bought by the firm is called (1) social cost (2) opportunity cost (3) economic cost (4) surcharged cost

Description : The fixed cost on such factors of production which are neither hired nor bought by the firm is called (1) social cost (2) opportunity cost (3) economic cost (4) surcharged cost

Last Answer : social cost

The profit of a company (whose capital is divided into 25‚000 shares of Rs. 10 each) for the last three years are : Rs. 50‚000; Rs. 60‚000 and Rs. 40‚000. The fair return on investment is taken at 10% p.a. The value of company’s share will be– (A) Rs. 10 (B) Rs. 20 (C) Rs. 30 (D) Rs. 40

Description : The profit of a company (whose capital is divided into 25‚000 shares of Rs. 10 each) for the last three years are : Rs. 50‚000; Rs. 60‚000 and Rs. 40‚000. The fair return on investment is taken at 10% p.a. The value of company’s share will be– (A) Rs. 10 (B) Rs. 20 (C) Rs. 30 (D) Rs. 40

Last Answer : Answer: Rs. 20

Which of the spaces listed is defined as a 'location requiring an exceptional degree of protection' when considering the installation of shipboard electrical equipment? A. Machinery space B. Chart room C. Console room D. Accommodation space

Description : Which of the spaces listed is defined as a 'location requiring an exceptional degree of protection' when considering the installation of shipboard electrical equipment? A. Machinery space B. Chart room C. Console room D. Accommodation space

Last Answer : Answer: A

Use of improved implements has potential to reduce the cost of cultivation up to a)10% b) 30% c) 20% d) 15%

Description : Use of improved implements has potential to reduce the cost of cultivation up to a)10% b) 30% c) 20% d) 15%

Last Answer : 20%

Memo admission of payment in form MO 10(a) is prepared a) When a MO loss after payment b) When a MO loss before payment c) Either A or B d) Neither A nor B

Description : Memo admission of payment in form MO 10(a) is prepared a) When a MO loss after payment b) When a MO loss before payment c) Either A or B d) Neither A nor B

Last Answer : a) When a MO loss after payment

Fluid medium used in the classification technique of mineral beneficiation is (A) Air (B) Water (C) Either (A) or (B) (D) Neither (A) nor (B

Description : Fluid medium used in the classification technique of mineral beneficiation is (A) Air (B) Water (C) Either (A) or (B) (D) Neither (A) nor (B

Last Answer : (C) Either (A) or (B)

Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Leaching of phosphate rock by strong __________ acid produces phosphoric acid. (A) Sulphuric (B) Hydrochloric (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Thermal efficiency of a Carnot engine can approach 100%, only when the temperature of the (A) Cold reservoir approaches zero (B) Hot reservoir approaches infinity (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Thermal efficiency of a Carnot engine can approach 100%, only when the temperature of the (A) Cold reservoir approaches zero (B) Hot reservoir approaches infinity (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : C) Either (A) or (B)

Which of the following is preferred for riveting? (A) Lap joint (B) Butt joint (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Which of the following is preferred for riveting? (A) Lap joint (B) Butt joint (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (B) Butt joint

One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) The product composition but not the fraction vaporised (B) The product composition as well as the fraction vaporised (C) The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Description : One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) ... The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Last Answer : (C) The fraction vaporised but not the product composition

The fuel ratio of a coal is (A) The ratio of its percentage of fixed carbon to that of volatile matter (B) Helpful in estimation of its rank (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The fuel ratio of a coal is (A) The ratio of its percentage of fixed carbon to that of volatile matter (B) Helpful in estimation of its rank (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Electrical desalting of crude oil removes the __________ impurities. (A) Oleophilic (B) Oleophobic (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) Oleophobic

Effluent treatment cost in a chemical plant is categorised as the __________ cost. (A) Fixed (B) Overhead (C) Utilities (D) Capital

Description : Effluent treatment cost in a chemical plant is categorised as the __________ cost. (A) Fixed (B) Overhead (C) Utilities (D) Capital

Last Answer : (C) Utilities

Food must be moist, with a minimum water content of _____before contamination by microorganisms and spoilage can occur. a. 18% to 20% b. 10 to 15% c. 5 to 10% d. 0 to 5%

Description : Food must be moist, with a minimum water content of _____before contamination by microorganisms and spoilage can occur. a. 18% to 20% b. 10 to 15% c. 5 to 10% d. 0 to 5%

Last Answer : a. 18% to 20%

Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Description : Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Last Answer : Answer: Option C

The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Description : What is the active agent in most home (night guard) bleaching solutions? a. 2-5% carbamide peroxide b. 10 - 15% Phosphoric acid c. 10 - 15% carbamide peroxide d. 35% hydrogen peroxide e. 5 - 10% citric acid Attention:

Last Answer : c. 10 - 15% carbamide peroxide

It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Description : It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The ... 5%). (A) 15 min (B) 51 min (C) 71 min (D) 94 min

Last Answer : (C) 71 min