Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it?
(A) Electrical installation cost
(B) Equipment installation cost
(C) Cost for piping
(D) Equipment insulation cost
by

1 Answer

Answer :

(D) Equipment insulation cost
by

Related questions

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment. (A) 4 (B) 13 (C) 22 (D) 34

Description : Cost of piping in a fluid processing unit (e.g., distillation) of a chemical process plant is about __________ percent of the fixed capital investment. (A) 4 (B) 13 (C) 22 (D) 34

Last Answer : (B) 13

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

Which of the following is not a component of the fixed capital for a chemical plant facility? (A) Raw materials inventory (B) Utilities plants (C) Process equipment (D) Emergency facilities

Description : Which of the following is not a component of the fixed capital for a chemical plant facility? (A) Raw materials inventory (B) Utilities plants (C) Process equipment (D) Emergency facilities

Last Answer : (A) Raw materials inventory

The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Description : The 'total capital investment' for a chemical process plant comprises of the fixed capital investment and the (A) Overhead cost (B) Working capital (C) Indirect production cost (D) Direct production cost

Last Answer : (B) Working capital

Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year showing the cost at that time relative to a certain base year (C) Turnover ratio of a chemical plant is the ratio of gross annual sales to the fixed capital investment (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Description : Pick out the wrong statement. (A) Longer tubes are less expensive per unit heat transfer area as compared to shorter tubes (B) A cost index is merely a number for a given year ... butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

Last Answer : (D) Plates with butt welded joints are less expensive compared to lap welded joints, because squaring of plates is not necessary

'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Description : 'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Last Answer : (B) Equipment cost by scaling

Which of the following is not a component of the working capital for a chemical process plant? (A) Product inventory (B) In-process inventory (C) Minimum cash reserve (D) Storage facilities

Description : Which of the following is not a component of the working capital for a chemical process plant? (A) Product inventory (B) In-process inventory (C) Minimum cash reserve (D) Storage facilities

Last Answer : D) Storage facilities

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Last Answer : C. the total power available minus the attenuation losses

Which of the following statements is most correct? A. For small companies, long-term debt is the principal source of external financing. B. Current assets of the typical manufacturing firm account for over half of its total assets. C. Strict adherence to the maturity matching approach to financing wD. Similar to the capital structure management, working capital management requires the financial manager to make a decision and not address the issue again for several months.ould call for all current assets to be financed solely with current liabilities.

Description : Which of the following statements is most correct? A. For small companies, long-term debt is the principal source of external financing. B. Current assets of the typical manufacturing firm account ... the financial manager to make a decision and not address the issue again for several months.

Last Answer : B. Current assets of the typical manufacturing firm account for over half of its total assets.

Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General expenses = administrative expenses + distribution & marketing expenses (C) Total product cost = manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Description : Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General ... manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Last Answer : (D) Total product cost = direct production cost + plant overhead cost

'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Description : 'Lang factor' is defined as the ratio of the capital investment to the delivered cost of major equipments. The value of 'Lang factor' for fixed capital investment, for a solid-fluid processing chemical plant ranges from (A) 1.2 to 1.4 (B) 2.5 to 2.7 (C) 4.2 to 4.4 (D) 6.2 to 6.4

Last Answer : C) 4.2 to 4.4

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate of buildings in a chemical plant is about 3% of its initial cost (C) Insurance rates on annual basis in a chemical plant may be about 1% of the fixed capital investment (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Description : Pick out the wrong statement. (A) The annual depreciation rate for machinery and equipments in a chemical process plant is about 10% of the fixed capital investment (B) Annual depreciation rate ... chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

Last Answer : (D) In a chemical industry, research and development cost amounts to about 15% of net sales realisation (NSR)

The_______ of an office will ordinarily be a sum equal to the average _________multiplied by the number of days in which funds can be obtained, plus a percentage of the average ___________(if necessary), as a margin – the amount of which will depend upon the extent of the difference between the receipts and payments, and other considerations a) Minimum cash balance , daily payments, daily payments a) Maximum cash balance , daily payments, daily payments a) Minimum cash balance , daily payments, daily receipts a) None of these

Description : The_______ of an office will ordinarily be a sum equal to the average _________multiplied by the number of days in which funds can be obtained, plus a percentage of the average ___________(if ... payments, daily payments a) Minimum cash balance , daily payments, daily receipts a) None of these

Last Answer : a) Minimum cash balance , daily payments, daily payments

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

A Unit Price (UP) contract provides: 1. a reimbursement of allowable costs plus a fixed fee which is paid proportionately as the contract progresses 2. a reimbursement of allowable cost of services performed plus an agreed upon percentage of the estimated cost as profit 3. the supplier with a fixed price for delivered performance plus a predetermined fee for superior performance 4. a fixed price where the supplier agrees to furnish goods and services at unit rates and the final price is dependent on the quantities needed to carry out the work.

Description : A Unit Price (UP) contract provides: 1. a reimbursement of allowable costs plus a fixed fee which is paid proportionately as the  contract progresses  2. a reimbursement of allowable cost of services ... unit rates and the  final price is dependent on the quantities needed to carry out the work.

Last Answer : 4. a fixed price where the supplier agrees to furnish goods and services at unit rates and the  final price is dependent on the quantities needed to carry out the work

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment away. B. Measure capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Description : When working on electrical circuits containing large capacitors, in addition to deenergizing the circuit, which of the listed precautions should also be taken? A. Keep all radio equipment ... capacitor insulation resistance. C. Ground the capacitor terminals. D. Check capacitor circuit polarity.

Last Answer : Answer: C

The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Description : The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Last Answer : (C) 10 to 20

There are 2 plants manufacturing the same product under one corporate management which has decided to merge them. Calculate Break -even point of the merged plant. Particulars Plant I Plant II Capacity operation 100% 60% Sales 6,00,000 2,40,000 Variable cost 4,40,000 1,80,000 Fixed cost 80,000 50,000

Description : There are 2 plants manufacturing the same product under one corporate management which has decided to merge them. Calculate Break -even point of the merged plant. Particulars Plant I Plant II Capacity operation 100% ... 000 2,40,000 Variable cost 4,40,000 1,80,000 Fixed cost 80,000 50,000simpl

Last Answer : c) Rs 5,00,000

Manufacturing cost in a chemical company does not include the (A) Fixed charges (B) Plant overheads (C) Direct products cost (D) Administrative expenses

Description : Manufacturing cost in a chemical company does not include the (A) Fixed charges (B) Plant overheads (C) Direct products cost (D) Administrative expenses

Last Answer : (D) Administrative expenses

Net capital employed is equal to --------------- a) Total assets minus liabilities b) Fixed asset plus net working capital c) Total asset minus long-term liabilities d) Total assets

Description : Net capital employed is equal to --------------- a) Total assets minus liabilities b) Fixed asset plus net working capital c) Total asset minus long-term liabilities d) Total assets

Last Answer : b) Fixed asset plus net working capital

The minimum amount of------------------,irrespective of such private participation,could be specified at a minimum 17.5 per cent of project costs by lending institutions. A. bank loans B. promotors contribution C. fixed capital D. working capital

Description : The minimum amount of------------------,irrespective of such private participation,could be specified at a minimum 17.5 per cent of project costs by lending institutions. A. bank loans B. promotors contribution C. fixed capital D. working capital

Last Answer : B. promotors contribution

Gas Piping Installation?

Description : Gas Piping Installation?

Last Answer : form_title=Gas Piping Installation form_header=8883 How would you best describe the scope of the work? (Select all that apply)*= [] Repair leak in gas line [] Replace old gas lines [] Appliance gas ... Dryer [] Stove/oven/cooktop [] Central heating system [] Water heater [] Generator [] Other

Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Description : Total reflux in a distillation operation requires minimum (A) Reboiler load (B) Number of plates (C) Condenser load (D) All (A), (B) and (C)

Last Answer : (B) Number of plates

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Description : Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Last Answer : Answer: D

In the manufacture of H3 PO4 (ortho); strong H2 SO4 leaching wet process as compared to electric furnace process (A) Uses lower grade phosphate rock (B) Requires lower capital investment in the plant(C) Produces lower purity acid(D) Is very costly

Description : In the manufacture of H3 PO4 (ortho); strong H2 SO4 leaching wet process as compared to electric furnace process (A) Uses lower grade phosphate rock (B) Requires lower capital investment in the plant (C) Produces lower purity acid (D) Is very costly

Last Answer : (C) Produces lower purity acid

What is working capital? a. The funds needed for the day to day running of the company b. The cash on hand at the end of the day c. Profits less current liabilities d. The amount of funds a company needs to run indefinitely e. Total sales less total expenses

Description : What is working capital? a. The funds needed for the day to day running of the company b. The cash on hand at the end of the day c. Profits less current liabilities d. The amount of funds a company needs to run indefinitely e. Total sales less total expenses

Last Answer : a. The funds needed for the day to day running of the company

A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Description : A law that specifically requires the service of a duly registered electronics and communications engineer in the designing installation and construction, operation and maintenance of radio stations. A. Act 3846 B. LOl 1000 C. R.A. 5734 D. Dept. order 88

Last Answer : D. Dept. order 88

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the (A) Manufacturing cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Description : An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from ... cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Last Answer : (B) Depreciation by sinking fund method

When maintenance personnel are working on electrical equipment, all supply switches should be secured in the open position and tagged specifically by the _____________. A. watch engineer B. chief engineer or first assistant C. chief electrician D. person performing the repair

Description : When maintenance personnel are working on electrical equipment, all supply switches should be secured in the open position and tagged specifically by the _____________. A. watch engineer B. chief engineer or first assistant C. chief electrician D. person performing the repair

Last Answer : Answer: D

A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Description : A dynamic RAM has refresh cycle of 32 times per msec. Each refresh operation requires 100 nsec and a memory cycle requires 250 nsec. What percentage of memory’s total operating time is required for refreshes? (A) 0.64 (B) 0.96 (C) 2.00 (D) 0.32

Last Answer : Answer: D Explanation: in 1ms : refresh = 32 times Memory cycle = 1ms/250ns = 106ns/250ns = 4000 times Therefore, % of refresh time = (32 x 100ns)/(4000 x 250ns) = 3200ns/1000000 x 100% = 0.32%

Utilities cost in the operation of chemical process plant comes under the (A) Plant overhead cost (B) Fixed charges (C) Direct production cost (D) General expenses

Description : Utilities cost in the operation of chemical process plant comes under the (A) Plant overhead cost (B) Fixed charges (C) Direct production cost (D) General expenses

Last Answer : C) Direct production cost

For custom -made equipment and commercial construction projects, which pricing method is most likely to be used? A)Prestige pricing B)Markup pricing C)Return -on -investment pricing D)Cost -plus pricing

Description : For custom -made equipment and commercial construction projects, which pricing method is most likely to be used? A)Prestige pricing B)Markup pricing C)Return -on -investment pricing D)Cost -plus pricing

Last Answer : D)Cost-plus pricing

In a chemical process plant, the total product cost comprises of manufacturing cost and the (A) General expenses (B) Overhead cost (C) R & D cost (D) None of these

Description : In a chemical process plant, the total product cost comprises of manufacturing cost and the (A) General expenses (B) Overhead cost (C) R & D cost (D) None of these

Last Answer : (A) General expenses

The ratio that includes whether investment in inventory is efficiently used or not a) Inventory turnover ratio b) Working capital turn over ratio c) Fixed asset turn over ratio d) Activity ratio

Description : The ratio that includes whether investment in inventory is efficiently used or not a) Inventory turnover ratio b) Working capital turn over ratio c) Fixed asset turn over ratio d) Activity ratio

Last Answer : a) Inventory turnover ratio

In a manufacturing industry, breakeven point occurs, when the (A) Total annual rate of production equals the assigned value (B) Total annual product cost equals the total annual sales (C) Annual profit equals the expected value (D) Annual sales equals the fixed cost

Description : In a manufacturing industry, breakeven point occurs, when the (A) Total annual rate of production equals the assigned value (B) Total annual product cost equals the total annual sales (C) Annual profit equals the expected value (D) Annual sales equals the fixed cost

Last Answer : (B) Total annual product cost equals the total annual sales

Which of the spaces listed is defined as a 'location requiring an exceptional degree of protection' when considering the installation of shipboard electrical equipment? A. Machinery space B. Chart room C. Console room D. Accommodation space

Description : Which of the spaces listed is defined as a 'location requiring an exceptional degree of protection' when considering the installation of shipboard electrical equipment? A. Machinery space B. Chart room C. Console room D. Accommodation space

Last Answer : Answer: A

It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Description : It is used to encode the minimum amount of speech information necessary to reproduce a perceptible message with a fewer bits that those needed by a conventional encoder/decoder

Last Answer : vocoders

If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the corresponding size of conductor will be most economical. This statement is known as (a) Kelvin's law (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above

Description : If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the ... (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above

Last Answer : (a) Kelvin's law

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. millivolt meter and a jumper B. ohmmeter C. megohm meter D. high potential tester

Last Answer : Answer: A

On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the machine secured B. millivolt meter and a jumper with the machine running C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Description : On some electrical generating equipment one outboard bearing pedestal is insulated from the bedplate. To check this insulation with the machine assembled you should use a____________. A. ohmmeter with the ... C. megohm meter with the machine running D. voltmeter and ampmeter with the machine running

Last Answer : Answer: B

An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. The maximum allowable operating temperature of the machine. B. The temperature of the machine at the time the resistance reading was taken. C. The normal temperature rise of the machine. D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Description : An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. ... D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Last Answer : Answer: B