How much does installation of wide plank flooring cost?

How much does installation of wide plank flooring cost?
by

1 Answer

Answer :

The cost of installing flooring can vary between installers, and depends on the amount needing to be installed. It is best to choose several reputable installers and get estimates from each company.
by

Related questions

Has anyone here had any experience with restoring old, old wide plank oak flooring?

Description : Has anyone here had any experience with restoring old, old wide plank oak flooring?

Last Answer : We refinished our original hardwood floors from 1950 and they look great. Each slat is only about 2 wide, but I'd imagine the principle is the same to redo yours. Basically rent a floor sander and use a ... to clean them up, then one or two finer grits to get them smooth. Stain it all, and voila.

How much does a box of vinyl plank flooring weigh?

Description : How much does a box of vinyl plank flooring weigh?

Last Answer : Need answer

Is vinyl plank flooring something I can install myself?

Description : Is vinyl plank flooring something I can install myself?

Last Answer : Yes, you can install vinyl plank flooring by yourself, but keep in mind that you are going to need a lot of time and patience. You want to make sure that you buy a high quality glue for laying ... do it piece by piece. There are many DIY tutorials out there that can help teach you more thoroughly.

Does vinyl plank flooring need an adhesive.?

Description : Does vinyl plank flooring need an adhesive.?

Last Answer : No, vinyln plank flooring does not require adhesive. The plans actually snap together and float on top of the existing floor. The only requirement is a padded underlayment.

Cork Flooring Installation?

Description : Cork Flooring Installation?

Last Answer : form_title=Install Cork Flooring form_header=This type of flooring is considered eco-friendly, comfortable and reduces sounds. What brand of cork flooring are you interested in?=_ What type of flooring is currently installed?= [] ... rooms would you want installed?= {(),1,2,3,4,5,6,7,8,9,10,More}

What does doing the abdominal plank do for you?

Description : What does doing the abdominal plank do for you?

Last Answer : A plank doesn't look like much, but it's an amazing workout. Planking tones and strengthens all the muscles in your core - abdominals, obliques, hips, and back. It also works your glutes and ... But, eight hours? Nope. Planks should be measured in seconds, not minutes, and certainly not hours.

What do you think would happen if you did a Beatrix Kiddo fight with a plank?

Description : What do you think would happen if you did a Beatrix Kiddo fight with a plank?

Last Answer : Probably the same thing that happened to Beatrix, a bloody busted up hand, except unlike her I wouldn’t break through the plank at the end :P

How can I hold a plank for 1 min without trembling?

Description : How can I hold a plank for 1 min without trembling?

Last Answer : answer:Practice! Breathing and thinking about something else helps me.

Can you use regular old cedar to cook "cedar plank" dishes?

Description : Can you use regular old cedar to cook "cedar plank" dishes?

Last Answer : Just make sure it’s not treated with anti-fungal products… you want UNTREATED wood. Very important because some treated woods can contain poisons.

What is the energy conversion of a hammer and strikes a nail into a plank?

Description : What is the energy conversion of a hammer and strikes a nail into a plank?

Last Answer : john lifts a hammer and strikes a nail into a plank. Which of the following energy conversion take place?a. Kinetic energy→potential energy→heat and sound energy b. ... energyc. Kinetic energy→potential energy→heat energy→sound energyd. Potential energy→heat energy →sound energy and kinetic energy

john lifts a hammer and strikes a nail into a plank. Which of the following energy conversion take place?

Description : john lifts a hammer and strikes a nail into a plank. Which of the following energy conversion take place?

Last Answer : a. Kinetic energy→potential energy→heat and sound energy b. Potential energy→kinetic energy→heat and sound energyc. Kinetic energy→potential energy→heat energy→sound energyd. Potential energy→heat energy →sound energy and kinetic energy

A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from either end. A person of mass 40 kg

Description : A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from either end. A person of mass 40 kg

Last Answer : A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from ... How far can the person walk before the plank topples?

Why do workers use a plank of wood to load gas cylinder in truck?

Description : Why do workers use a plank of wood to load gas cylinder in truck?

Last Answer : Because wood is non-conductive.

Where can I find a recipe for cedar plank grilled salmon?

Description : Where can I find a recipe for cedar plank grilled salmon?

Last Answer : You can find a recipe for a cedar plank grilled salmos on the following website: http://www.foodnetwork.com/recipes/bbq-with-bobby-flay/cedar-plank-salmon-recipe/index.html. It's a great recipe.

What are the best side dishes to serve with cedar plank grilled salmon?

Description : What are the best side dishes to serve with cedar plank grilled salmon?

Last Answer : A good side item would be pan fried asparagus. It's fairly easy to make. Another great one is also steamed, buttered potatoes. The red ones are especially good.

What’s the longest anyone has ever held a plank?

Description : What’s the longest anyone has ever held a plank?

Last Answer : My personal best is like two minutes. I’m assuming it’s a little longer than that.

The quantum theory of light was given by – (1) Einstein (2) Plank (3) Newton (4) Faraday

Description : The quantum theory of light was given by – (1) Einstein (2) Plank (3) Newton (4) Faraday

Last Answer : (2) Plank Explanation: The Quantum theory of light was first discovered by Max Planck. In 1900, Planck, attempting to explain body radiation suggested that although light was a wave.

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Description : A piece of timber whose thickness and width are respectively 5 cm and 10 cm is called (A) Slate (B) Plank (C) Board (D) Strip

Last Answer : Answer: Option D

The trunk of tree left after cutting all the branches is known as (A) Log (B) Batten (C) Plank (D) Baulk

Description : The trunk of tree left after cutting all the branches is known as (A) Log (B) Batten (C) Plank (D) Baulk

Last Answer : Answer: Option A

Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Last Answer : ans 4

It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Description : It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Patela

is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank

Description : is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank

Last Answer : Plank

it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Description : it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Last Answer : Patela 

is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank

Description : is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank

Last Answer : Plank

Cedar Plank Salmon recipe

Description : Cedar Plank Salmon recipe

Last Answer : Cedar Plank Salmon recipe Cedar Plank Salmon is a simple delicacy that will wow everyone at the table. The aroma and flavor released by soaked cedar planks lends an earthy and tender flavor to delicate, ... marinade. Bake for 30-40 minutes in oven until salmon can be easily flaked with a fork.

Who is the founder of quantum theory of radiation ? (1) Einstein (2) Bohr (3) Plank (4) S. N. Bose

Description : Who is the founder of quantum theory of radiation ? (1) Einstein (2) Bohr (3) Plank (4) S. N. Bose

Last Answer : Plank

How much does it cost per square foot to have vinyl flooring installed?

Description : How much does it cost per square foot to have vinyl flooring installed?

Last Answer : Most of the time vinyl flooring includes installation in the price and depending on the quality of the vinyl flooring will range from $3-4 a square foot to higher end vinyl flooring that can cost well over $4 a square foot.

How does the cost of slate flooring compare to concrete?

Description : How does the cost of slate flooring compare to concrete?

Last Answer : A finished concrete floor is generally less expensive than a slate or stone floor. A simple professionally poured concrete floor can average about $5.00 a square meter. An installed slate floor costs ... . Stamped concrete is also an option that looks nice but it is still less than slate.

What is the average cost of Mannington flooring?

Description : What is the average cost of Mannington flooring?

Last Answer : There are various different prices for the cost of Mannington flooring. The average cost varies from state to state and city to city. The average cost in the USA is currently $99.

Cost of finished vs unfinished hardwood flooring?

Description : Cost of finished vs unfinished hardwood flooring?

Last Answer : Prefinished hardwood flooring is more expensive to buy than unfinished flooring but when you add the cost of finishing the floor, you're better off going with the prefinished. The prefinished floor is finished with UV ... coats for it to dry. It can take more than a week to get a good finish.

Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Description : Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Last Answer : Perimeter of plot = 3300/15 = 220 meter 2πr = 220 2 × 22/7 × r = 220 r = 35 m. Area of plot = πr^2 = 22/7 × 35 × 35 = 3850 mt^2 Cost of flooring = 3850 × 100=Rs. 385000 Answer: a)

How much should a complete drip irrigation system cost with parts and installation?

Description : How much should a complete drip irrigation system cost with parts and installation?

Last Answer : Need Answer

How much is the avg. gas fireplace installation cost in the U.S.?

Description : How much is the avg. gas fireplace installation cost in the U.S.?

Last Answer : The average gas fireplace installation cost is about $500. It is cheaper than a wood burning foreplace installation.

How much does furnace installation usually cost?

Description : How much does furnace installation usually cost?

Last Answer : The average cost for installation on a furnace is about $1000-$2000. The actual furnace can cost you between $900-$1500.

How much does heating stove installation cost?

Description : How much does heating stove installation cost?

Last Answer : It depend on what kind of heating stove you want. They range from couple hundreds dollars to couple thousands of dollars and money to hire professional to do it also.

What is the typical cost of installation of an electric garage door opener?

Description : What is the typical cost of installation of an electric garage door opener?

Last Answer : From what I gather, a typical cost of an electric garage door opener is around $150. However, with installation, it could run you a total cost of about $350 or so.

What is the typical cost of installation of a garbage disposer unit?

Description : What is the typical cost of installation of a garbage disposer unit?

Last Answer : The cost of installation will be directly related to the cost of living in your area. If you go through one of the large home improvement stores to buy the disposal, you can likely add installation for ... - $500, depending on your location, the unit you choose, and whether the wiring is in place.

What is the price of carpet installation cost?

Description : What is the price of carpet installation cost?

Last Answer : Many companies will wave the installation fee if you buy carpet through them. If you decide to have someone else install it, you could expect to pay about $4.00 per square yard for the carpet, and another $.50 for foam installation.

The two biggest factors that come into play when determining your specific, carpet installation cost, is both the type of carpet you choose, and the retailer/installer you choose for the purchasing an?

Description : The two biggest factors that come into play when determining your specific, carpet installation cost, is both the type of carpet you choose, and the retailer/installer you choose for the purchasing an?

Last Answer : Yes it is important. We should consider both cost as well as the retailer/installer. Because the installer will be the one who will later provide the maintenance to the work.

Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Last Answer : (B) Venturimeter

'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Description : 'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Last Answer : (B) Equipment cost by scaling

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Last Answer : C. the total power available minus the attenuation losses

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

How much is linoleum flooring?

Description : How much is linoleum flooring?

Last Answer : Linoleum flooring comes on a roll, can be cut to size and is a great alternative to carpets because it is easy to wash and keep clean. Prices of linoleum flooring vary greatly depending on the ... so it is always a good thing to try the forums for linoleum flooring feedback before you start.