Should I use a diamond grinding wheel for cutting ceramic tile?

Should I use a diamond grinding wheel for cutting ceramic tile?
by

1 Answer

Answer :

Use a wheel specifically rated for grinding concrete or ceramic tile. It doesn't have to be a diamond wheel; titanium-coated, tungsten-coated or carbide coated wheels will also work.
by

Related questions

A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)

Description : A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

How do you clean your ceramic, stone or vinyl tile floors?

Description : How do you clean your ceramic, stone or vinyl tile floors?

Last Answer : I use a Swiffer mop, but instead of the disposable thingies, I use a regular washcloth soaked in about a half-vinegar, half-water solution. If you want to get fancy you can add a few drops of essential oils for a nice smell. Then I can chuck the washcloth in the laundry.

My laptop just fell 3 feet and hit a ceramic tile floor. It appears to be working fine and is fully backed up. Anything I need to check / any diagnostics I should do?

Description : My laptop just fell 3 feet and hit a ceramic tile floor. It appears to be working fine and is fully backed up. Anything I need to check / any diagnostics I should do?

Last Answer : I would run exhaustive tests on the Hard Disk. It could have damaged sectors.

Is there a difference between high quality ceramic tile or lower quality?

Description : Is there a difference between high quality ceramic tile or lower quality?

Last Answer : Higher quality tile seems to be harder to work with, but worth it in the long run. Porcelan tile will not chip near as fast as ceramic tile. Some IS made cheaper and weaker than others

Anyone know what the best method is to apply a sealant on a 218 foot wall ceramic tile art piece?

Description : Anyone know what the best method is to apply a sealant on a 218 foot wall ceramic tile art piece?

Last Answer : answer:Wow. My first guess would be to use an airless to goo it on?

Can you put ceramic tile on top of ceramic

Description : Can you put ceramic tile on top of ceramic

Last Answer : Technically you can but it is not the best practice. You would have to prep the tile underneath and if it had cracks and stuff it would not lay rights. It would also increase your floor height and this may ... doors, etc. The best thing to do would be to take up the existing tile and lay new tile.

How do I clean chemical residue from a kitchen tile floor? I think the floor is ceramic.?

Description : How do I clean chemical residue from a kitchen tile floor? I think the floor is ceramic.?

Last Answer : You will need water, liquid detergent, soap, brush and vegetable oil. Spread a mixture of water and liquid soap and detergent on the ceramic floor and let it work for a few minutes. With a mop ... wash the floor with bleach will increase the dose every time it fades. This only worsens the abrasion.

What do ceramic tile contractors do?

Description : What do ceramic tile contractors do?

Last Answer : Ceramic tile contractors install ceramic tile floors in any room of a house, and they are specialized and do a great job. They also install other types of tiles, such as ceramic wall tiles, and ceramic countertop tiles.

What type of wet saw is needed to cut ceramic tile?

Description : What type of wet saw is needed to cut ceramic tile?

Last Answer : There are many types of wet saws. For tiling, the wet saw will need to have a diamond blade for best results. Wet saws tend to cost several hundred dollars new, many people rent these machines for smaller jobs.

Ceramic Tile?

Description : Ceramic Tile?

Last Answer : form_title= Ceramic Tile form_header= Install ceramic tile in your home! Where would you like the ceramic tile installed?*= _ [50] Do you need the ceramic tile to be custom cut?*= () Yes () No () Not Sure What type of tile do you what installed?*= _ [50]

Ceramic & Porcelain Tile Installation?

Description : Ceramic & Porcelain Tile Installation?

Last Answer : form_title=Ceramic & Porcelain Tile Installation form_header=11793 How would you best describe the kind of project this is?*= () Replace existing tile () Repair existing tile () Replace existing non-tile surface () ... going to be placed?*= [] Floor [] Wall [] Tub/Shower [] Countertop [] Backsplash

Ceramic Tile Installation?

Description : Ceramic Tile Installation?

Last Answer : form_title=Ceramic Tile Installation form_header=Give your home an elegant touch with ceramic tiles. Have them installed by the pros! What room would the ceramic tiles be installed in?=_ Are you looking for ... to be replaced or repaired?= () Replaced () Repaired () Unsure Desired Completion Date=_

Where can I learn to install ceramic tile?

Description : Where can I learn to install ceramic tile?

Last Answer : You can learn how to install ceramic tile at your local Home Depot. They have classes for pretty much everything.

What are some good remodeling tips for installing ceramic tile?

Description : What are some good remodeling tips for installing ceramic tile?

Last Answer : Some of the tips for installing ceramic tile is to make sure that you gather the necessary tools and equipment. Then, for guidance on for installing ceramic tiles, you can visit http://home.howstuffworks.com/home-improvement/repair/how-to-install-ceramic-tile1.htm

Does Earthing occur if I work, stand, or walk barefooted on a ceramic tile floor?

Description : Does Earthing occur if I work, stand, or walk barefooted on a ceramic tile floor?

Last Answer : It depends on whether the tile floor sits on A. It depends on whether the tile floor sits on a concrete slab or on the ground. If directly on a ncrete slab or on the ground. If directly ... wil the surface will, like glass, probably prevent l, like glass, probably prevent conductivity. Back to Top

How to Install Ceramic Tile

Description : How to Install Ceramic Tile

Last Answer : How to Install Ceramic Tile Ceramic tiles are glossy and often have pretty patterns, making your bathroom and your kitchen sections look dainty. This popular material is a welcome addition to your home, ... on. All your efforts will be rewarded by the sheer beauty of the tiled wall and flooring.

A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Description : A child accidentally drops a square ceramic tile. It breaks into smaller pieces as shown in Figure P. To avoid a scolding, she plans to compose a mural of broken pieces to gift to her mother. Which figure out of the given options could she make?

Last Answer : C 

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut-off the wheel stops in 10 seconds. The number of revolutions made by the wheel before coming to rest would be a.1500 b.3000 c.1000 d.250 e.500

Last Answer : d. 250

A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Description : A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Last Answer : b. 31.4 rad/s2

For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Description : For grinding of softer materials, the grinding wheel should have __________ grain size. (A) Finer (B) Coarser (C) Medium (D) Any type of

Last Answer : (B) Coarser

A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Description : A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Last Answer : A) Ductile material

The streak of a mineral can be obtained most easil by performing which of the following tests? w) rubbing the mineral on an unglazed white tile x) putting the mineral into acid y) scratching the mineral with a diamond z) examining the mineral under a microscope

Description : The streak of a mineral can be obtained most easil by performing which of the following tests? w) rubbing the mineral on an unglazed white tile x) putting the mineral into acid y) scratching the mineral with a diamond z) examining the mineral under a microscope

Last Answer : ANSWER: W -- RUBBING THE MINERAL ON AN UNGLAZED WHITE TILE

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

I’m white, perfect for cutting and grinding. For most animals, I am a useful tool. What am I? -Riddles

Description : I’m white, perfect for cutting and grinding. For most animals, I am a useful tool. What am I? -Riddles

Last Answer : Teeth.

I'm white, and used for cutting and grinding. When I'm damaged, humans usually remove me or fill me. For most animals I am a useful tool.What am I? -Riddles

Description : I'm white, and used for cutting and grinding. When I'm damaged, humans usually remove me or fill me. For most animals I am a useful tool.What am I? -Riddles

Last Answer : A tooth!

What of these is responsible for cutting tearing and grinding food?

Description : What of these is responsible for cutting tearing and grinding food?

Last Answer : its ur TEETH

I'm white; perfect for cutting & grinding. For most animals I am a useful tool. What am I?

Description : I'm white; perfect for cutting & grinding. For most animals I am a useful tool. What am I?

Last Answer : Teeth

A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Last Answer : (C) Ultra-grinding

A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Last Answer : (C) Ultra grinding

The compound of silicon used in cutting & grinding tools is silicon

Description : The compound of silicon used in cutting & grinding tools is silicon

Last Answer : carbide/carborundum.

Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining(C) Cutting(D) Polishing

Description : Pollution by particulate matter emission in the atmosphere does not take place during metal (A) Grinding (B) Machining (C) Cutting (D) Polishing

Last Answer : (D) Polishing

Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Description : Stellite is a __________ material. (A) Ferrous (B) Ceramic (C) Cemented carbide (D) Non-ferrous cast alloy cutting tool

Last Answer : (D) Non-ferrous cast alloy cutting tool

Which country is well known for diamond cutting industry ? -Do You Know?

Description : Which country is well known for diamond cutting industry ? -Do You Know?

Last Answer : answer:

Can I really tell if a diamond is real by cutting glass?

Description : Can I really tell if a diamond is real by cutting glass?

Last Answer : To determine if your diamond is real, use a magnifying glass up and look at the diamond through the glass. Look for imperfections in the stone. If you're unable to find any, then the diamond is probably fake. the majority of real diamonds have imperfections also called inclusions.

Which country is well known for diamond cutting industry?

Description : Which country is well known for diamond cutting industry?

Last Answer : Belgium

How to prevent the wheel bolts on the car from cutting

Description : Can they be painted on the surface so that they do not rust?

Last Answer : buy buckets or rubber caps

(1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco and most non-specialty grout. It usually originates from limestone. It is a fine powder produced by grinding Portland cement. clinker (more than 90%), a limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

The most practical method used for resurfacing a ship's service motor commutator is to _____________. A. turn it down in the ship's lathe B. use a grinding rig C. use a hand stone D. burnish it with commutator stones

Description : The most practical method used for resurfacing a ship's service motor commutator is to _____________. A. turn it down in the ship's lathe B. use a grinding rig C. use a hand stone D. burnish it with commutator stones

Last Answer : Answer: B

Use of 'grinding aids' is done in __________ grinding. (A) Dry (B) Wet (C) Ultrafine (D) Intermediate

Description : Use of 'grinding aids' is done in __________ grinding. (A) Dry (B) Wet (C) Ultrafine (D) Intermediate

Last Answer : (A) Dry

Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

How can we make grinding in real life as good as grinding in a video game?

Description : How can we make grinding in real life as good as grinding in a video game?

Last Answer : Most occupations have elements that require boring repetitive activity- some more than others. Being able to successfully work at a boring occupation has very little to do with intelligence either. Sometimes ... still keep an active mind. Having fun is more about attitude than about what you do.

Is there a difference in taste between making coffee from ground coffee compared with freshly grinding the coffee beans yourslef?

Description : Is there a difference in taste between making coffee from ground coffee compared with freshly grinding the coffee beans yourslef?

Last Answer : My neighbor grinds and roasts his own. I can’t tell the difference. But I definitely can say the aroma in his house is delicious! In the summer he roasts in his garage and it smells so good even an 1/8 mile away!

Best Dremel bit for grinding metal?

Description : Best Dremel bit for grinding metal?

Last Answer : I was able to remove a bearing race using the red oxide cutting disks. I just went through a whole mess of them. It was the carrier bearing in the flywheel of my old car. What a mess.

Does anyone wear one of those mouth guards at night to keep you from grinding your teeth?

Description : Does anyone wear one of those mouth guards at night to keep you from grinding your teeth?

Last Answer : Yes, I do. I've used one for over 30 years, and it works great. Took 2 nights to get used to it, and after that, no problem. I started using it because I actually had a tooth split from all the ... , not one of those you can get at the local drugstore. If it's well made, it can last that long.

What games do you get caught grinding on without enjoyment?

Description : What games do you get caught grinding on without enjoyment?

Last Answer : answer:Haha. I do that all the time. I play 1st edition Ad&D, and sometimes it’s hard to find players. So I just create characters, using different methods, different rules, maybe I’ll include Wilderness survival guide material or whatever. I have about a kabillion characters ready to go.

Do you know of any musicians who started fatherhood young but ultimately kept grinding it out and achieved their dream as an artist?

Description : Do you know of any musicians who started fatherhood young but ultimately kept grinding it out and achieved their dream as an artist?

Last Answer : John Lennon, if I understand my Beatles lore.

Is daytime, continual teeth grinding always a sign of stress?

Description : Is daytime, continual teeth grinding always a sign of stress?

Last Answer : He could have TMJ, or tempromandibular joint disorder.

What does it mean when the cd player in the car makes a grinding noise when starting the car?

Description : What does it mean when the cd player in the car makes a grinding noise when starting the car?

Last Answer : answer:If it's in the CD player, it could be that the read head (which is an electromechanical device that is actually reading the CD) is not in place. It suggests, but is not 100% of the case, ... to breaking. Sort of like a needle on a phonograph record, if you are old enough to remember that.

How do you stop grinding your teeth during the day?

Description : How do you stop grinding your teeth during the day?

Last Answer : I do this all the time, and I never notice that I'm doing it until my jaw starts hurting from the tension. I find that chewing a piece of gum, or having a hard candy or a mint in ... . If all else fails, you should definitely ask your dentist. Prolonged grinding can really hurt your teeth and jaw.