Peak expiratory flow rate?

Peak expiratory flow rate?
by

1 Answer

Answer :

DefinitionThe peak expiratory flow rate measures how fast a person can breathe out (exhale) air. It is one of many tests that measures how well the lungs are working.Alternative NamesPeak flowHow the test is performedThis test requires a peak expiratory flow monitor: a small handheld device with a mouthpiece at one end and a scale with a moveable indicator (usually a small plastic arrow).To perform this test:Breathe in as deeply as possible.Blow into the instrument's mouthpiece as hard and fast as possible.Do this three times, and record the highest flow rate.How to prepare for the testLoosen any tight clothing that might restrict your breathing. Sit up straight or stand while performing the tests.How the test will feelThere is usually no discomfort. Rarely, repeated efforts may cause some
by
selected by

Related questions

Which of the following tests is used at home to assess therapy and determine if a patient with asthma should seek emergency care? (a) Forced expiratory volume in one second (FEV1) (b) Forced vital capacity (FVC) (c) Total lung capacity (TLC) (d) Peak expiratory flow rate (PEFR) (e) Residual volume (RV)

Description : Which of the following tests is used at home to assess therapy and determine if a patient with asthma should seek emergency care? (a) Forced expiratory volume in one second (FEV1) (b) Forced vital capacity ... ) Total lung capacity (TLC) (d) Peak expiratory flow rate (PEFR) (e) Residual volume (RV)

Last Answer : Ans: D

Which of the following tests is used at home to assess therapy and determine if a patient with asthma should seek emergency care? (a) Forced expiratory volume in one second (FEV1) (b) Forced vital capacity (FVC) (c) Total lung capacity (TLC) (d) Peak expiratory flow rate (PEFR) (e) Residual volume (RV)

Description : Which of the following tests is used at home to assess therapy and determine if a patient with asthma should seek emergency care? (a) Forced expiratory volume in one second (FEV1) (b) Forced vital capacity ... ) Total lung capacity (TLC) (d) Peak expiratory flow rate (PEFR) (e) Residual volume (RV)

Last Answer : Ans: D

The Spirometry finding found during episodes of Bronchial Asthma is Options: 1) Marked reduction in FVC 2) Normal or increased FEV1/FVC ratio 3) Marked reduction in FEV1 4) Increased peak expiratory Flow

Description : The Spirometry finding found during episodes of Bronchial Asthma is Options: 1) Marked reduction in FVC 2) Normal or increased FEV1/FVC ratio 3) Marked reduction in FEV1 4) Increased peak expiratory Flow

Last Answer : Correct Answer: 3) Marked reduction in FEV1

Given figure is showing spirogram of pulmonary volumes and capacities Which represent expiratory reserve volume `:-`

Description : Given figure is showing spirogram of pulmonary volumes and capacities Which represent expiratory reserve volume `:-`

Last Answer : Given figure is showing spirogram of pulmonary volumes and capacities Which represent expiratory reserve volume `:-` A. A B. B C. C D. D

If expiratory reserve volume is 1100ml residual volume is 1200ml and tidal volume is 500ml , what shall be the functional residual capacity

Description : If expiratory reserve volume is 1100ml residual volume is 1200ml and tidal volume is 500ml , what shall be the functional residual capacity

Last Answer : If expiratory reserve volume is 1100ml residual volume is 1200ml and tidal volume is 500ml , what shall be the ... B. 2800 ml C. 2300 ml D. 1200ml

What is vital capacity of our lungs? (a) Inspiratory reserve volume plus expiratory reserve volume (b) Total lung capacity minus residual volume (c) Inspiratory reserve volume plus tidal volume (d) Total lung capacity minus expiratory reserve volume

Description : What is vital capacity of our lungs? (a) Inspiratory reserve volume plus expiratory reserve volume (b) Total lung capacity minus residual volume (c) Inspiratory reserve volume plus tidal volume (d) Total lung capacity minus expiratory reserve volume

Last Answer : (b) Total lung capacity minus residual volume

Lungs are made up of air-filled sacs, the alveoli. They do not collapse even after forceful expiration, because of (a) inspiratory reserve volume (b) tidal volume (c) expiratory reserve volume (d) residual volume.

Description : Lungs are made up of air-filled sacs, the alveoli. They do not collapse even after forceful expiration, because of (a) inspiratory reserve volume (b) tidal volume (c) expiratory reserve volume (d) residual volume.

Last Answer : (d) residual volume.

Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 – 3000 mL (B) Inspiratory reserve (ii) 1100 – 1200 mL volume (C) Expiratory reserve (iii) 500 – 550 mL volume (D) Residual volume (iv) 1000 – 1100 mL (A) (B) (C) (D) (a) (iii) (ii) (i) (iv) (b) (iii) (i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II (A) Tidal volume (i) 2500 - 3000 mL (B) Inspiratory reserve (ii) 1100 - 1200 mL volume (C) Expiratory reserve (iii ... i) (iv) (ii) (c) (i) (iv) (ii) (iii) (d) (iv) (iii) (ii) (i)

Last Answer : (b) (iii) (i) (iv) (ii)

Tidal volume and expiratory reserve volume of an athlete is 500 mL and 1000 mL respectively. What will be his expiratory capacity if the residual volume is 1200 mL? (a) 2700 mL (b) 1500 mL (c) 1700 mL (d) 2200 mL

Description : Tidal volume and expiratory reserve volume of an athlete is 500 mL and 1000 mL respectively. What will be his expiratory capacity if the residual volume is 1200 mL? (a) 2700 mL (b) 1500 mL (c) 1700 mL (d) 2200 mL

Last Answer : b) 1500 mL

In which stage of COPD is the forced expiratory volume (FEV1) < 30%? a) III Stage III patients demonstrate FEV1 < 30% with respiratory failure or clinical signs of right heart failure b) II Stage II patients demonstrate FEV1 between > 30% and 80% c) I Stage I is mild COPD with FEV1 < 70%. d) O Stage O is characterized by normal spirometry

Description : In which stage of COPD is the forced expiratory volume (FEV1) < 30%? a) III Stage III patients demonstrate FEV1 < 30% with respiratory failure or clinical signs of right heart failure b) II Stage II ... I Stage I is mild COPD with FEV1 < 70%. d) O Stage O is characterized by normal spirometry

Last Answer : a) III Stage III patients demonstrate FEV1 < 30% with respiratory failure or clinical signs of right heart failure

Which respiratory volume is the maximum volume of air that can be inhaled after maximal expiration? a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL. b) Tidal volume Tidal volume is the volume of air inhaled and exhaled with each breath. c) Expiratory reserve volume Expiratory reserve volume is the maximum volume of air that can be exhaled forcibly after a normal exhalation. d) Residual volume Residual volume is the volume of air remaining in the lungs after a maximum exhalation.

Description : Which respiratory volume is the maximum volume of air that can be inhaled after maximal expiration? a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL. b) Tidal volume Tidal ... volume Residual volume is the volume of air remaining in the lungs after a maximum exhalation.

Last Answer : a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL.

Lungs are made up of air-filled sacs, the alveoli. They do not collapse even after forceful expiration, because of: (1) Inspiratory Reserve Volume (2) Tidal Volume (3) Expiratory Reserve Volume (4) Residual Volume

Description : Lungs are made up of air-filled sacs, the alveoli. They do not collapse even after forceful expiration, because of: (1) Inspiratory Reserve Volume (2) Tidal Volume (3) Expiratory Reserve Volume (4) Residual Volume

Last Answer : (4) Residual Volume

The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Description : The calibration of an HPLC detector can be evaluated by measurement of? A. Retention time B. Temperature C. Flow rate accuracy D. Intensity of the peak

Last Answer : D. Intensity of the peak

In patients with benign prostatic hypertrophy, finasteride exerts the following action/actions: A. Reduces size of the prostate gland B. Increases peak urinary flow rate C. Relaxes vesical sphincter D. Both 'A' and 'B' are correct

Description : In patients with benign prostatic hypertrophy, finasteride exerts the following action/actions: A. Reduces size of the prostate gland B. Increases peak urinary flow rate C. Relaxes vesical sphincter D. Both 'A' and 'B' are correct

Last Answer : D. Both 'A' and 'B' are correct

Does anyone have experience with peak flow meters? I have some questions about what's considered "normal". (read on) questions about?

Description : Does anyone have experience with peak flow meters? I have some questions about what's considered "normal". (read on) questions about?

Last Answer : answer:I hope this helps you out. I know nothing but your issue but I looked around for a hopefully helpful link. Best of luck! Ruth http://www.lungusa.org/lung-disease/asthma/living-with-asthma/take-control-of-your-asthma/measuring-your-peak-flow-rate.html

How to measure peak flow?

Description : How to measure peak flow?

Last Answer : Move the marker to the bottom of the numbered scale.Stand up straight.Take a deep breath. Fill your lungs all the way.Hold your breath while you place the mouthpiece in your mouth, between your teeth. Close ... of Medicine. Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.

How to use a peak flow meter?

Description : How to use a peak flow meter?

Last Answer : You may have heard of a peak flow meter if you have Asthma and wonder is it really worth it. How do you use it? What good is it really? Well it turns out that it's often hard to tell how ... Washington School of Medicine. Also reviewed by David Zieve, MD, MHA, Medical Director, A.D.A.M., Inc.

When drainage to sewage ratio is 20, the peak dry weather flow is A. 20% of the design discharge B. Slightly less than 5% of the design discharge C. Slightly more than 5% of the design discharge D. None of these

Description : When drainage to sewage ratio is 20, the peak dry weather flow is A. 20% of the design discharge B. Slightly less than 5% of the design discharge C. Slightly more than 5% of the design discharge D. None of these

Last Answer : ANS: B

In the flow of one cycle of single phase AC current past any given point in a circuit, the maximum current peak occurs _____________. A. one time B. two times C. three times D. four times

Description : In the flow of one cycle of single phase AC current past any given point in a circuit, the maximum current peak occurs _____________. A. one time B. two times C. three times D. four times

Last Answer : Answer: B

The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Description : The peak of a 4 hour flood hydrograph is 240 m3 /sec. If the rainfall excess is 80 mm and base flow which is constant is 40 m3 /sec, peak of 4hours unit hydrograph will be (A) 20 m3 /sec (B) 25 m3 /sec (C) 30 m3 /sec (D) 35 m3 /sec

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above

Description : Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above

Last Answer : Answer: Option D

For achieving self-cleaning velocity, a minimum velocity of ---- mps. Is desirable for design peak flow (a) 0.6 mps (b) 0.8 mps* (c) 1.0 mps (d) 2.0 mps

Description : For achieving self-cleaning velocity, a minimum velocity of ---- mps. Is desirable for design peak flow (a) 0.6 mps (b) 0.8 mps* (c) 1.0 mps (d) 2.0 mps

Last Answer : b) 0.8 mps*

As a result of detonation in an I.C engine, following parameter attains a high value A. peak temperature B. peak pressure C. rate of pressure rise D. rate of temperature rise

Description : As a result of detonation in an I.C engine, following parameter attains a high value A. peak temperature B. peak pressure C. rate of pressure rise D. rate of temperature rise

Last Answer : ANSWER : C

As a result of detonation in Internal combustion engines the following parameter attains very high value. a. peak pressure b. rate of rise of pressure c. rate of rise of temperature. d. peak temperature.

Description : As a result of detonation in Internal combustion engines the following parameter attains very high value. a. peak pressure b. rate of rise of pressure c. rate of rise of temperature. d. peak temperature.

Last Answer : ANSWER b. rate of rise of pressure

Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for areas less than 50 hectares C. The period after which the entire area starts contributing to the runoff, is called the time of concentration D. All the above

Description : Pick up the correct statement from the following: A. The maximum rate of storm runoff is called peak drainage discharge B. Rational method of estimating peak run off, may be used precisely for ... entire area starts contributing to the runoff, is called the time of concentration D. All the above

Last Answer : ANS: D

Which is the proper measurement of average power emitted by a pulsed laser? a. Energy x time b. Pulse energy x repetition rate c. Pulse energy / repetition rate d. Peak power x pulse length

Description : Which is the proper measurement of average power emitted by a pulsed laser? a. Energy x time b. Pulse energy x repetition rate c. Pulse energy / repetition rate d. Peak power x pulse length

Last Answer : b. Pulse energy x repetition rate

According to Godrich the ratio of peak demand rate to mean demand is (A) Max. weekly demand/Average weekly demand = 148% (B) Max. monthly demand/Average monthly demand = 128% (C) Max. half yearly demand/Average half yearly demand = 107% (D) All the above

Description : According to Godrich the ratio of peak demand rate to mean demand is  (A) Max. weekly demand/Average weekly demand = 148%  (B) Max. monthly demand/Average monthly demand = 128%  (C) Max. half yearly demand/Average half yearly demand = 107%  (D) All the above 

Last Answer : (D) All the above 

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

Which is the proper measurement of average power emitted by a pulsed laser? ∙ a. Energy x time ∙ b. Pulse energy x repetition rate ∙ c. Pulse energy / repetition rate ∙ d. Peak power x pulse length

Description : Which is the proper measurement of average power emitted by a pulsed laser? ∙ a. Energy x time ∙ b. Pulse energy x repetition rate ∙ c. Pulse energy / repetition rate ∙ d. Peak power x pulse length

Last Answer : ∙ b. Pulse energy x repetition rate

The ________ is a function of three values: average data rate, peak data rate, and maximum burst size.

Description : The ________ is a function of three values: average data rate, peak data rate, and maximum burst size.

Last Answer : Effective bandwidth

Marginal rate of substitution is the ___of the indifference curve (a) mean (b) slope © peak (d) inverse

Description : Marginal rate of substitution is the ___of the indifference curve (a) mean (b) slope © peak (d) inverse

Last Answer : (b) slope