Description : A scale on a map shows that 3 centimeters represents 10 km what number of centimeters on the map represents an actual distance of 25 km?
Last Answer : 18
Description : Test Plan A. Road map for testing B. Tells about the actual results and expected results C. Both A and B D. None of the above
Last Answer : A. Road map for testing
Description : What is the term for the ratio of actual velocity at which a signal travels through a line to the speed of light in a vacuum? A. Velocity factor B. Characteristic impedance C. Surge impedance D. Standing wave ratio
Last Answer : A. Velocity factor
Description : The ratio of the actual damping coefficient (c) to the critical damping coefficient (cc ) is known as _________ A Damping factor B Damping coefficient C Resistive factor D Resistive coefficient
Last Answer : A Damping factor
Description : The ratio of actual damping coefficient to the critical damping coefficient is known as A Magnification Factor B Damping Factor C Logarithmic decrementD None of the mentioned
Last Answer : B Damping Factor
Description : The ratio of the actual damping coefficient (c) to the critical damping coefficient (cc ) is known as _________ ( A ) Damping factor ( B ) Damping coefficient ( C ) Resistive factor ( D ) Resistive coefficient
Last Answer : ( A ) Damping factor
Description : The ratio of the actual damping coefficient (c) to the critical damping coefficient (cc ) is known as _________ a) Damping factor b) Damping coefficient c) Resistive factor d) Resistive coefficient
Last Answer : a) Damping factor
Description : The ratio of isothermal power to actual measured input power of a compressor is known as: a) Isothermal efficiency b) Volumetric Efficiency c) Barometric efficiency d) None
Last Answer : a) Isothermal efficiency
Description : A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in ... ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter
Last Answer : Answer: B
Description : If a ‘vertical aerial photograph’, (20 cm x 20 cm) in size, on a R.F.I: 10,000, has 60% longitudinal overlap and 40% side overlap, the actual ground length covered by each photograph in the longitudinal direction of the flight will be : (a) 4 km (b) 6 km (c) 0.8 km (d) 0.4 km
Last Answer : .8
Description : If you place a map of your town on the ground, how much of it covers the area represented?
Last Answer : Hmm, wouldn’t it be just one point? The distance from one point to another on the map would represent a larger distance than the distance from one point to another in the town, so any area larger than a point wouldn’t correspond…right?
Description : I lie in the earth, and under the ground; A map may reveal me for journey's abound; I can be found in squares, to reduce down to size; Or at the end of a strand, where attachment lies. What am I? -Riddles
Last Answer : Roots
Description : Contour interval is (A) Inversely proportional to the scale of the map (B) Directly proportional to the flatness of ground (C) Larger for accurate works (D) Larger if the time available is more
Last Answer : (A) Inversely proportional to the scale of the map
Description : How does the distance between planets compare to the actual size of the planets?
Last Answer : The distances are in millions of km. The size is in thousands of km.
Description : The distance is measured on the topographic map. -SST 10th
Last Answer : (i) To measure the straight distance: To measure the shortest distance between two points on the topographic map along a straight line can be done easily with the help of a pair of divider . Keep the ... kilometres the answer would be 3km., 300m. If asked in metres the answer would be 3300 metres.
Description : if- a highway on a map can be approximated by the line y = x + 1, where x and y are in tens of miles. Which of these is the distance from a house at point P(4, -3) to the highway?
Last Answer : 4v/ 2 ~5.7
Description : what- A highway on a map can be approximated by the line y = x + 1, where x and y are in tens of miles. Which of these is the distance from a house at point P(4, -3) to the highway?
Last Answer : 4v/ 2~5.7
Description : If are spaced closely together on a map there is a drastic temperature change over distance?
Last Answer : Need answer
Description : As wind velocity decreases the distance between isobars on a weather map will?
Last Answer : increase
Description : Here is a map of Evergreen Retreat. Every unit represents one kilometer. What is the distance between the mess hall and cabin 2 in kilometers?
Last Answer : 48
Description : What map unit (centimorgan) is adopted in the construction of genetic maps? (a) A unit of distance between genes on chromosomes, representing 50% cross over. (b) A unit of distance between two ... 100% cross over. (d) A unit of distance between genes on chromosomes, representing 1% cross over.
Last Answer : (d) A unit of distance between genes on chromosomes, representing 1% cross over.
Description : From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours
Last Answer : Answer: Option D
Description : Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines
Last Answer : (b) Vertical distance between two successive contour lines
Description : In actual machines a.Mechanical advantage is unity b.Mechanical advantage is greater than velocity ratio c.Mechanical advantage is less than velocity ratio d.Mechanical advantage is less than unity e.Mechanical advantage is equal to velocity ratio
Last Answer : c. Mechanical advantage is less than velocity ratio
Description : What is the degree of saturation? A. the ratio of the actual relative humidity to the saturated specific humidity at the same temperature B. the ratio of the actual specific humidity to the ... specific humidity to the actual specific humidity at the same temperature D. none of the above
Last Answer : ANSWER : B
Description : Absolute or specific humidity is a) the actual mass of moisture present in a specific amount of air b) the maximum mass of moisture that a specific amount of air can hold c) the ratio of ... a specific amount of air at that absolute temperature e) a specific amount of air saturated with moisture
Last Answer : ANSWER : A
Description : Ratio of actual indicated work to hypothetical indicated work in a steam engine is the (a) Indicated thermal efficiency (b) Friction factor (c) Mechanical efficiency (d) Diagram factor
Last Answer : Ans : d
Description : What is the name given to ratio of actual cycle efficiency and ideal cycle efficiency.
Last Answer : Efficiency ratio.
Description : Power is __________. A. actual amount of power reference to 1mW B. logarithmic ratio of two powers C. definite amount of energy per time period D. current flow per time period
Last Answer : C. definite amount of energy per time period
Description : For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has ... of volume of a sphere having the same surface area as the particle to the actual volume of the particle
Last Answer : (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle
Description : . Equivalent diameter of a particle is the diameter of the sphere having the same (A) Ratio of surface to volume as the actual volume (B) Ratio of volume to surface as the particle (C) Volume as the particle (D) None of these
Last Answer : (A) Ratio of surface to volume as the actual volume
Description : The ratio of the actual mesh dimension of Taylor series to that of the next smaller screen is (A) 2 (B) √2 (C) 1.5 (D) √3
Last Answer : (B) √2
Description : Overall efficiency of the distillation column is (A) The ratio of number of ideal plates to actual plates (B) The ratio of number of actual plates to ideal plates (C) Same as the Murphree efficiency (D) Always more than the point efficiency
Last Answer : (A) The ratio of number of ideal plates to actual plates
Description : Relative humidity is the ratio of the (A) Partial pressure of the vapour to the vapour pressure of the liquid at room temperature (B) Partial pressure of the vapour to the vapour pressure of the liquid at gas temperature (C) Actual humidity to saturation humidity (D) None of these
Last Answer : (B) Partial pressure of the vapour to the vapour pressure of the liquid at gas temperatur
Description : Stress Concentration Factor is the ratio of nominal stress obtained by elementary equations for minimum cross- section and highest value of actual stress near discontinuity. a) True b) False
Last Answer : b) False
Description : Ratio of actual damping coefficient to critical damping coefficient is called A. Damping Factor B. Angular Factor C. Critical Factor D. None of above
Last Answer : A. Damping Factor
Description : Compressibility factor (i.e., the ratio of actual volume of gas to the volume predicted by ideal gas law) for all gases are (A) Always greater than one (B) Same at the same reduced temperature (C) Same at the same reduced pressure (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : In actual machines (A) Mechanical advantage is greater than velocity ratio (B) Mechanical advantage is equal to velocity ratio (C) Mechanical advantage is less than velocity ratio (D) Mechanical advantage is unity
Last Answer : (C) Mechanical advantage is less than velocity ratio
Description : In case of a, centrifugal pump, the ratio h1/h2is termed as the __________ efficiency (where, h1 = actual measured head & h2 = head imparted to the fluid by impeller). (A) Mechanical (B) Overall (C) Volumetric (D) Impeller
Last Answer : A) Mechanical
Description : Factor of safety against sliding of a slope, is the ratio of (A) Actual cohesion to that required to maintain stability of slope (B) Shear strength to shear stress along the surface (C) Neither (a) nor (b) (D) Both (a) and (b)
Description : If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by (A) (5/6) (r/1 + r²) M (B) (5/6) (r²/1 + r²) M (C) (5/6) (r²/1 + r3 ) M (D) (5/6) (r²/1 + r4 ) M
Description : Relative humidity is the ratio of actual vapour pressure to the saturation vapour pressure (A) At the same temperature (B) At the same pressure (C) In the same volume (D) In the atmosphere
Last Answer : Answer: Option A
Description : Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of ... of vapours which could be contained at the same temperature when fully saturated (D) All the above
Description : 20. The coefficient of discharge is the ratio of theoretical discharge to the actual discharge through an orifice. A) True B) False
Last Answer : B
Description : Coefficient of contraction is the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Loss of head in the orifice to the head of water available at the exit of the ... available at the exit of the orifice (D) Area of jet at vena-contracta to the area of orifice
Description : Coefficient of resistance is the ratio of (A) Actual velocity of jet at vena-contracta to the theoretical velocity (B) Area of jet at vena-contracta to the area of orifice (C) Loss ... available at the exit of the orifice (D) Actual discharge through an orifice to the theoretical discharge
Last Answer : Answer: Option C
Description : Coefficient of velocity is defined as the ratio of (A) Actual velocity of jet at vena contracta to the theoretical velocity (B) Area of jet at vena contracta to the area of orifice (C) Actual discharge through an orifice to the theoretical discharge (D) None of the above
Description : Is define as the ratio of the actual pressure of the vapor a. Relative Humidity b. Humidity Ratio c. Dew Point d. Adiabatic Saturation
Last Answer : Relative Humidity
Description : Match the columns (a) Activity Ratio -------------------- i) (Actual hours worked / Budgeted hours) * 100 (b) Capacity Ratio ------------------ ii) (Standard hours of actual production / Actual hours worked) * 100 ( ... , B-iii, C-i B. A-i, B-ii, C-iii C. A-iii, B-i, C-ii D. None of the above
Last Answer : C. A-iii, B-i, C-ii