What is another word for twisting a cloth to make water come out of it?

What is another word for twisting a cloth to make water come out of it?
by

1 Answer

Answer :

Need answer
by

Related questions

What will stop my t-shirts twisting when I wash them?

Description : What will stop my t-shirts twisting when I wash them?

Last Answer : It's a matter of quality of the fabric - and is often indicated by the price. I think low-cost logo'd shirts are more likely to do this. Some t-shirts are made from stretched or loosely woven/knitted ... it is to dry them flat so that you can shape them while still wet and let them dry that way.

The moment of a force a.Occurs about a point b.Measures the capacity to do useful work c.Occurs only when bodies are in motion d.Measures the ability to produce turning or twisting about an axes e.None of the above

Description : The moment of a force a.Occurs about a point b.Measures the capacity to do useful work c.Occurs only when bodies are in motion d.Measures the ability to produce turning or twisting about an axes e.None of the above

Last Answer : d. Measures the ability to produce turning or twisting about an axes

why do hawthorn trunks twist? Is the trunk twisting or just the bark?

Description : why do hawthorn trunks twist? Is the trunk twisting or just the bark?

Last Answer : Need Answer

A dagger thrust at my own heart, Dictates the way I'm swayed. Left I stand, and right I yield, To the twisting of the blade. What am I? -Riddles

Description : A dagger thrust at my own heart, Dictates the way I'm swayed. Left I stand, and right I yield, To the twisting of the blade. What am I? -Riddles

Last Answer : A Lock.

The twisting force developed by a motor and applied to a shaft is called _____________. A. magnetism B. electromotive force C. torque D. voltage

Description : The twisting force developed by a motor and applied to a shaft is called _____________. A. magnetism B. electromotive force C. torque D. voltage

Last Answer : Answer: C

Flywheel absorbs energy during those periods of crank rotation when 1. The twisting moment is greater than the resisting moment 2. The twisting moment is equal to the resisting moment 3. The twisting moment is less than resisting moment 4. The load on engine falls

Description : Flywheel absorbs energy during those periods of crank rotation when 1. The twisting moment is greater than the resisting moment 2. The twisting moment is equal to the resisting moment 3. The twisting moment is less than resisting moment 4. The load on engine falls

Last Answer : 1. The twisting moment is greater than the resisting moment

Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Last Answer : C. Axial tensile or compressive load

Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Description : Cotter joints is used for transforming........... A. Axial compressive load B. Axial tensile load C. Axial tensile or compressive load D. Twisting load

Last Answer : C. Axial tensile or compressive load

DNA compaction involves a. A Twisting And Packing Of The DNA. b. Supercoiling. c. The Formation Of Looped Domains. d. All The Above (A—C) Are Correct.

Description : DNA compaction involves a. A Twisting And Packing Of The DNA. b. Supercoiling. c. The Formation Of Looped Domains. d. All The Above (A—C) Are Correct.

Last Answer : d. All The Above (A—C) Are Correct.

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

Pick up the correct statement from the following: (A) The length of the brass handle is included in the length of chain (B) The handles are on swivel joints to prevent twisting of the chain (C) The fifth tag from either end of the chain is numbered 5 (D) All the above

Description : Pick up the correct statement from the following: (A) The length of the brass handle is included in the length of chain (B) The handles are on swivel joints to prevent twisting of the chain (C) The fifth tag from either end of the chain is numbered 5 (D) All the above

Last Answer : (D) All the above

The maximum twisting moment a shaft can resist, is the product of the permissible shear stress and (A) Moment of inertia (B) Polar moment of inertia (C) Polar modulus (D) Modulus of rigidly

Description : The maximum twisting moment a shaft can resist, is the product of the permissible shear stress and (A) Moment of inertia (B) Polar moment of inertia (C) Polar modulus (D) Modulus of rigidly

Last Answer : (C) Polar modulus

Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting

Description : Hollow shafts can be made as strong as solid shafts by making the twisting moments of both the shafts same. Shafts made by __________ have residual stresses. (A) Forging (B) Cold rolling (C) Hot rolling (D) Casting

Last Answer : (B) Cold rolling

Which of the following terms refers to an injury to ligaments and other soft tissues of a joint? a) Sprain A sprain is caused by a wrenching or twisting motion.

Description : Which of the following terms refers to an injury to ligaments and other soft tissues of a joint? a) Sprain A sprain is caused by a wrenching or twisting motion. b) Dislocation Dislocation refers ... separation or dislocation of joint surfaces. d) Strain Strain refers to a muscle pull or tear.

Last Answer : a) Sprain A sprain is caused by a wrenching or twisting motion.

cause of translational errors occurred in CMM a. Twisting error b. Error in scale division c. Roll error d. Error in straightness

Description : cause of translational errors occurred in CMM a. Twisting error b. Error in scale division c. Roll error d. Error in straightness

Last Answer : Ans:- d. Error in straightness

What is the purpose of inboard ailerons? a. To reduce wing bending at high speed b. To reduce wing twisting at low speed c. To reduce wing bending at low speed d. To reduce wing twist at high speed

Description : What is the purpose of inboard ailerons? a. To reduce wing bending at high speed b. To reduce wing twisting at low speed c. To reduce wing bending at low speed d. To reduce wing twist at high speed

Last Answer : d. To reduce wing twist at high speed

What is the purpose of inboard ailerons? a. To reduce wing bending at high speed b. To reduce wing twisting at low speed c. To reduce wing bending at low speed d. To reduce wing twist at high speed

Description : What is the purpose of inboard ailerons? a. To reduce wing bending at high speed b. To reduce wing twisting at low speed c. To reduce wing bending at low speed d. To reduce wing twist at high speed

Last Answer : d. To reduce wing twist at high speed

Coil springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Description : Coil springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Last Answer : (c) compression

Leaf springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Description : Leaf springs absorb shocks by (a) bending (b) twisting (c) compression (d) tension

Last Answer : a) bending

Coil springs absorb shocks by (A) bending (B) twisting (C) compression (D) tension

Description : Coil springs absorb shocks by (A) bending (B) twisting (C) compression (D) tension

Last Answer : (C) compression

In shafts with keyways the allowable stresses are usually ------------ proportional to the twisting moment. a.25% b. 50% c. 75% d. 95%

Description : In shafts with keyways the allowable stresses are usually ------------ proportional to the twisting moment. a.25% b. 50% c. 75% d. 95%

Last Answer : c. 75%

Which of the following loading is considered for the design of axles ? (a) Bending moment only (b) Twisting moment only (c) Combined bending moment and torsion (d) Combined action of bending moment, twisting moment and axial thrust

Description : Which of the following loading is considered for the design of axles ? (a) Bending moment only (b) Twisting moment only (c) Combined bending moment and torsion (d) Combined action of bending moment, twisting moment and axial thrust

Last Answer : (a) Bending moment only

Two shafts will have equal strength, if (a) diameter of both the shafts is same (b) angle of twist of both the shafts is same (c) material of both the shafts is same (d) twisting moment of both the shafts is same

Description : Two shafts will have equal strength, if (a) diameter of both the shafts is same (b) angle of twist of both the shafts is same (c) material of both the shafts is same (d) twisting moment of both the shafts is same

Last Answer : d) twisting moment of both the shafts is same

It is a secondary shaft used to counter the direction of main shaft. 81. Shafts are subjected to ______ forces. a) Compressive b) Tensile c) Shear d) twisting

Description : It is a secondary shaft used to counter the direction of main shaft. 81. Shafts are subjected to ______ forces. a) Compressive b) Tensile c) Shear d) twisting

Last Answer : b) Tensile

The relationship among twisting moment(T) acting on a rotating shaft, power in watt(W), and angular velocity in radian per second(w) will be (a) T = W/w (b) W = Tw (c) W = T/w (d) none of these

Description : The relationship among twisting moment(T) acting on a rotating shaft, power in watt(W), and angular velocity in radian per second(w) will be (a) T = W/w (b) W = Tw (c) W = T/w (d) none of these

Last Answer : (b) W = Tw

At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Description : At fully plastic twisting moment (a) only fibres at surface are stressed to yield point in shear (b) fibres at centre are stressed to yield point in shear (c) all fibres are stressed to yield point in shear (d) none of these

Last Answer : (c) all fibres are stressed to yield point in shear

A shaft of length L is subject to a constant twisting moment T along its length L, then angle q through which one end of the bar will twist relative to other will be (a) T/g (b) T/GJ (c) GJ/TL (d) TL/GJ

Description : A shaft of length L is subject to a constant twisting moment T along its length L, then angle q through which one end of the bar will twist relative to other will be (a) T/g (b) T/GJ (c) GJ/TL (d) TL/GJ

Last Answer : (d) TL/GJ

If in a bar after twisting moment T has been applied, a line on surface is moved by an angle g then shearing moment will be (a) t/g (b) g (c) g/t (d) none of these

Description : If in a bar after twisting moment T has been applied, a line on surface is moved by an angle g then shearing moment will be (a) t/g (b) g (c) g/t (d) none of these

Last Answer : (b) g

For a solid or a hollow shaft subject to a twisting moment T, the torsional shearing stress t at a distance r from the centre will be (a) t = Tr/J (b) t = Tr (c) t = TJ/r (d) none of these

Description : For a solid or a hollow shaft subject to a twisting moment T, the torsional shearing stress t at a distance r from the centre will be (a) t = Tr/J (b) t = Tr (c) t = TJ/r (d) none of these

Last Answer : (a) t = Tr/J

A member subjected to couple produces rotational motion about its longitudinal axis called as ________ a. torsion b. twisting moment c. both a. and b. d. bending moment

Description : A member subjected to couple produces rotational motion about its longitudinal axis called as ________ a. torsion b. twisting moment c. both a. and b. d. bending moment

Last Answer : c. both a. and b.

The product of the tangential force acting on the shaft and radius of shaft known as (a) Torsional rigidity (b) Flexural rigidity (c) Bending moment (d) Twisting moment

Description : The product of the tangential force acting on the shaft and radius of shaft known as (a) Torsional rigidity (b) Flexural rigidity (c) Bending moment (d) Twisting moment

Last Answer : (d) Twisting moment

When a shaft is subjected to a twisting moment, every cross-section of the shaft will be under (a) Tensile stress (b) Compressive stress (c) Shear stress (d) All of these

Description : When a shaft is subjected to a twisting moment, every cross-section of the shaft will be under (a) Tensile stress (b) Compressive stress (c) Shear stress (d) All of these

Last Answer : c) Shear stress

Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment

Description : Strength of a shaft a. Is equal to maximum shear stress in the shaft at the time of elastic failure b. Is equal to maximum shear stress in the shaft at the time of rupture c. Is equal to torsional rigidity d. Is ability to resist maximum twisting moment

Last Answer : d. Is ability to resist maximum twisting moment

Which of the following is not an assumption in derivation of torsion equation? a. Circular shaft remains circular after twisting b. Plane section of the shaft remain plane after twisting c. Material of shaft is isotropic d. Angle of twist is proportional to radius

Description : Which of the following is not an assumption in derivation of torsion equation? a. Circular shaft remains circular after twisting b. Plane section of the shaft remain plane after twisting c. Material of shaft is isotropic d. Angle of twist is proportional to radius

Last Answer : d. Angle of twist is proportional to radius

The angle of twist is ------------- proportional to the twisting moment. a. directly. b. inversely. c. indirectly. d. reversely.

Description : The angle of twist is ------------- proportional to the twisting moment. a. directly. b. inversely. c. indirectly. d. reversely.

Last Answer : a. directly.

A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Description : A beam is a structural member which is subjected to (a) Axial tension or compression (b) Transverse loads and couples (c) Twisting moment (d) No load, but its axis should be horizontal and x-section rectangular or circular

Last Answer : b) Transverse loads and couples

What causes the young leaves of my plants to become pointed and irregular in shape? I noticed the twisting of the leaves and stems after spraying the plants for the first time.

Description : What causes the young leaves of my plants to become pointed and irregular in shape? I noticed the twisting of the leaves and stems after spraying the plants for the first time.

Last Answer : A. Your tomato plants have been injured by 2,4-D or a similar weed killer. Never use the same sprayer for weed control in your vegetable garden you used on your lawn. Drift from herbicides ... can also injure tomato plants. A virus disease called cucumber mosaic virus (CMV) can mimic these symptoms.

How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Description : How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Last Answer : Given, radius (r) = 7 m and height (h) = 24m ∴ Slant height (l) = √h2 + r2 = √242 + 72 = √625 = 25 m ∴ Length of canvas required

How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Description : How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Last Answer : l = √h2 + r2 = √(3.5)2 + (12)2 = √12.25 + 144 = √156.25 = 12.5 m Curved surface area = πrl = 22 / 7 × 3.5 × 12.5 = 137.5 m2 Area of cloth = 137.5 m2 Length of cloth required = C.S.A. / Width l = 137.5 / 5 = 27.5 m

How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Description : How many metres of cloth 5 m wide will be required to make a conical tent, the radius of whose base is 7 m and whose height is 24 m? -Maths 9th

Last Answer : Given, radius (r) = 7 m and height (h) = 24m ∴ Slant height (l) = √h2 + r2 = √242 + 72 = √625 = 25 m ∴ Length of canvas required

How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Description : How many metres of 5 m wide cloth will be required to make a conical tent, the radius of whose base is 3.5 m and height is 12 m ? -Maths 9th

Last Answer : l = √h2 + r2 = √(3.5)2 + (12)2 = √12.25 + 144 = √156.25 = 12.5 m Curved surface area = πrl = 22 / 7 × 3.5 × 12.5 = 137.5 m2 Area of cloth = 137.5 m2 Length of cloth required = C.S.A. / Width l = 137.5 / 5 = 27.5 m

Which fiber is used to make fire retardant cloth ?

Last Answer : Glass fiber is used.

How To Make Fireproof Cloth

Description : How To Make Fireproof Cloth

Last Answer : Into 3 pints water mix 1 cup ammonium chloride (available from drugstore or chemical suppy house) and 1/2 cup ammonium phosphate (available from a garden supply store). Soak cloth well and let dry. This preparation can be used for clothing, tents, awnings and other textiles.

Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Description : Grease coatings on electrical contact surfaces increase contact resistance and should be removed with a/an _______________. A. small wire brush B. compressed air jet C. clean dry cloth D. 10% solution carbon solvent and water

Last Answer : Answer: C

Metallic soap (e.g. aluminium or calcium salts of fatty acids) can be used (A) As a lubrican(B) As a rust preventive(C) In hard water for cleaning of cloth(D) As a foam depressant in distillation column

Description : Metallic soap (e.g. aluminium or calcium salts of fatty acids) can be used (A) As a lubrican (B) As a rust preventive (C) In hard water for cleaning of cloth (D) As a foam depressant in distillation column

Last Answer : (A) As a lubricant

What does a white cloth/shirt out of the window of a car that is (presumably) broken down mean?

Description : What does a white cloth/shirt out of the window of a car that is (presumably) broken down mean?

Last Answer : I have never seen this before, good question

Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a revolving screen used in flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Description : Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a ... flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Is there a way to profit from the alt-right movement? Should I try to corner the market on brown shirts? Or maybe white cloth for KKK robes?

Description : Is there a way to profit from the alt-right movement? Should I try to corner the market on brown shirts? Or maybe white cloth for KKK robes?

Last Answer : Buy stock in Zyklon-B

Cloth diapers or disposable?

Description : Cloth diapers or disposable?

Last Answer : answer:My sister used solely cloth diapers. I saw a documentary that actually said cloth diapers and disposable diapers are equally bad for the environment, but in different ways. (Laundering cloth diapers requires a lot of water and energy.) I like the idea of biodegradable inserts.