What is the load capacity of 2x8?

Last Answer : answer:That set is a mix of stuffed and live. The ones where there is a band around the snout are real. And the modern one of a dad placing his toddler on the back looks real (he's an idiot), ... its back. It looks desiccated. I think they could carry a pretty good size. They seem to be all muscle.

The capacity of robot to carry load is known as_____. a.Load carrying capacity b.Work envelope c.Maximum reach d.None of the above

Description : The capacity of robot to carry load is known as_____. a.Load carrying capacity b.Work envelope c.Maximum reach d.None of the above

Last Answer : a.Load carrying capacity

The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Last Answer : c.Speed of movement

____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Description : ____ is also known as work volume of robot a.Work envelope b.Speed of movement c.Load carrying capacity d.Precision of movement

Last Answer : a.Work envelope

load capacity of the car roof

Description : DACIA LODGY

Last Answer : 80 kg - https://www.car.info/en-se/dacia/lodgy/lodgy-2018-16318057/specs (Max roof load)

Load capacity of a vertically erected tram 15 x 26 cm

Description : Vertical oak trams, size 15 X 26 cm, about 80 cm high above the ground, concrete 80 cm below the ground. R

Last Answer : It depends on which direction the load will act. If vertically down, the load could be estimated at several tons.

How to find out the load capacity of a car roof?

Description : How much can I load KG on the Favorita roof?

Last Answer : Usually specified by the manufacturer. In general, a roof load of 35 kg is indicated for passenger cars

How to calculate the load capacity of a beam.

Description : I have a wooden beam 10cm x 10cm x length 2 meters. Will it carry 200 KG in the middle?

Last Answer : Kukni na http://mve.energetika.cz/uzitecnetabulky/bremeno-na-nosniku.htm ... 10x10 cm, if it does not have large knots or other defects, it can carry about 300 kg in the middle (with supports on the edges).

How is the load capacity of a bridge measured?

Description : Is it measured somehow at each bridge? Or do they just say that it should be so?

Last Answer : It doesn't measure, it counts, it's called statics. It's calculated by a civil engineer. Of course, he will leave a large reserve, because it is clear that people do not follow the rules much, so if ... that could have failed at Studénka, it has been almost 6 years and no waste is worth it: - (((

Can a lift truck with a 6000 ib.capacity at load center. Lift?

Description : Can a lift truck with a 6000 ib.capacity at load center. Lift?

Last Answer : Need answer

What is the average load capacity of a washer?

Description : What is the average load capacity of a washer?

Last Answer : 3.2 is the standard capacity

What front load washer has the largest capacity?

Description : What front load washer has the largest capacity?

Last Answer : According to www.Amazon.com, the Electrolux EWFLS70JIW 27 5.1 cu. Ft. Front-Load Washer - Island White, is the largest capacity front-load washer currently available. This particular washer features a 5.1 cubic feet capacity. This is large enough to handle a king-sized comforter.

The graph shown in the illustration represents the speed droop curves of two equal capacity alternators about to be paralleled. When paralleled, the greater portion of the total load above 60% for each unit will be picked up _____________. EL-0025 A. by unit 'A' B. by unit 'B' C. equally by each unit D. none of the above

Description : The graph shown in the illustration represents the speed droop curves of two equal capacity alternators about to be paralleled. When paralleled, the greater portion of the total load above 60% for each unit will be picked up ... unit 'A' B. by unit 'B' C. equally by each unit D. none of the above

Last Answer : Answer: A

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose governor has the zero speed droop setting will _____________. A. assume the smaller share of the load B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Description : Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose ... B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Last Answer : Answer: B

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

In the expression of dynamic load capacity P=XVF r + YF a , Y stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Description : In the expression of dynamic load capacity P=XVF r + YF a , Y stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Last Answer : (c) Thrust load factor

In the expression of dynamic load capacity P=XVF r + YF a , X stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Description : In the expression of dynamic load capacity P=XVF r + YF a , X stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Last Answer : (b) Radial load factor

In the expression of dynamic load capacity P=XVF r + YF a , V stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Description : In the expression of dynamic load capacity P=XVF r + YF a , V stands for? (a) Race rotation factor (b) Radial load factor (c) Thrust load factor (d) Service factor

Last Answer : (a) Race rotation factor

The dynamic load-carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. (a) True (b) False

Description : The dynamic load-carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. (a) True (b) False

Last Answer : (b) False

Stribeck equation gives the dynamic load capacity of the bearing. (a) True (b) False

Description : Stribeck equation gives the dynamic load capacity of the bearing. (a) True (b) False

Last Answer : (b) False

Stribeck equation gives the dynamic load capacity of the bearing. (a) True (b) False

Description : Stribeck equation gives the dynamic load capacity of the bearing. (a) True (b) False

Last Answer : (b) False

A total permanent deformation of 0.0001 of the ball diameter is taken for considering the static load capacity of the sh (a) True (b) False

Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering the static load capacity of the sh (a) True (b) False

Last Answer : (a) True

Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Description : Cylindrical roller bearing has a lower load capacity as compared to deep groove ball bearing. (a) True (b) False

Last Answer : (b) False

What is the main advantage of hydrodynamic bearing over roller bearing? (a) Easy to assemble [IES-2005] (b) Relatively low price (c) Superior load carrying capacity at higher speeds (d) Less frictional resistance

Description : What is the main advantage of hydrodynamic bearing over roller bearing? (a) Easy to assemble [IES-2005] (b) Relatively low price (c) Superior load carrying capacity at higher speeds (d) Less frictional resistance

Last Answer : (c) Superior load carrying capacity at higher speeds

Which one of the following is correct? [IES-2008] A hydrodynamic slider bearing develops load bearing capacity mainly because of- (a) Slider velocity (b) wedge shaped oil film (c) Oil compressibility (d) oil viscosity

Description : Which one of the following is correct? [IES-2008] A hydrodynamic slider bearing develops load bearing capacity mainly because of- (a) Slider velocity (b) wedge shaped oil film (c) Oil compressibility (d) oil viscosity

Last Answer : (b) wedge shaped oil film

Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Description : Petroff’s equation is used to find out (A) Load carrying capacity of the bearing (B) Frictional losses in the bearing (C) Unit bearing pressure on the bearing (D) Pressure distribution around the periphery of the journal

Last Answer : (B) Frictional losses in the bearing

Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing

Description : Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing

Last Answer : (C) Dimensionless parameter that contains all the design parameters

In the expression of dynamic load capacity P=XVF(r) + YF(a), V stands for ? a) Race rotation factor b) Radial factor c) Thrust factor d) None of the listed

Description : In the expression of dynamic load capacity P=XVF(r) + YF(a), V stands for ? a) Race rotation factor b) Radial factor c) Thrust factor d) None of the listed

Last Answer : a) Race rotation factor

The dynamic load carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. a) True b) False

Description : The dynamic load carrying capacity of a bearing is defined as the radial load in radial bearings that can be carried for a minimum life of 1000 revolutions. a) True b) False

Last Answer : b) False

Stribeck equation gives dynamic load capacity of the bearing. a) True b) False

Description : Stribeck equation gives dynamic load capacity of the bearing. a) True b) False

Last Answer : b) False

A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False

Description : A total permanent deformation of 0.0001 of the ball diameter is taken for considering static load capacity of the shaft. a) True b) False

Last Answer : a) True

Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Description : Cylindrical load bearing has lower load capacity as compared to deep groove ball bearing. a) True b) False

Last Answer : b) False

The type of spring used to achieve greater load carrying capacity within given space is (A) Spiral spring (B) Springs in series (C) Multi-leaf spring (D) Concentric springs

Description : The type of spring used to achieve greater load carrying capacity within given space is (A) Spiral spring (B) Springs in series (C) Multi-leaf spring (D) Concentric springs

Last Answer : (D) Concentric springs

Concentric springs are used, (A) To achieve greater load carrying capacity with given space (B) To achieve fail-safe system (C) To eliminate surge (D) Any of the above objectives

Description : Concentric springs are used, (A) To achieve greater load carrying capacity with given space (B) To achieve fail-safe system (C) To eliminate surge (D) Any of the above objectives

Last Answer : (D) Any of the above objectives

The static load carrying capacity of fine threads is greater than that of coarse threads. a) True b) False

Description : The static load carrying capacity of fine threads is greater than that of coarse threads. a) True b) False

Last Answer : b) False

Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Description : Kg of liquid evaporated per hour in an evaporator is defined as its (A) Capacity (B) Economy (C) Steam load (D) None of these

Last Answer : (A) Capacity

In a network, when the load is below the capacity of the network, the throughput ______________ A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Description : In a network, when the load is below the capacity of the network, the throughput ______________ A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Last Answer : B. increases proportionally with the load

In a network, when the load is much less than the capacity of the network, the delay is _________A. at a maximum B. at a minimum C. constant D. none of the above

Description : In a network, when the load is much less than the capacity of the network, the delay is _________ A. at a maximum B. at a minimum C. constant D. none of the above

Last Answer : B. at a minimum

In a network, after the load reaches the capacity,throughput _______. A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Description : In a network, after the load reaches the capacity,throughput _______. A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Last Answer : C. declines sharply

What are two common concerns in a cloud environment? (Choose two.) A. Inability to use proxy servers and load balancers. B. Not enough computing capacity during peak usage times. C. Illegal access to private data stored by applications in the cloud. D. Running out of storage space and network bandwidth at peak usage times. E. If two guest instances are running on the same host or on different hosts connected to the same physical ethernet, they should not be able to read or modify each other's network traffic.

Description : What are two common concerns in a cloud environment? (Choose two.) A. Inability to use proxy servers and load balancers. B. Not enough computing capacity during peak usage times. C. Illegal access ... same physical ethernet, they should not be able to read or modify each other's network traffic.

Last Answer : Illegal access to private data stored by applications in the cloud.If two guest instances are running on the same host or on different hosts connected to the same physical ethernet, they should not be able to read or modify each other's network traffic

What are two common concerns in a cloud environment? A. Inability to use proxy servers and load balancers. B. Not enough computing capacity during peak usage times. C. Illegal access to private data stored by applications in the cloud. D. Running out of storage space and network bandwidth at peak usage times.

Description : What are two common concerns in a cloud environment? A. Inability to use proxy servers and load balancers. B. Not enough computing capacity during peak usage times. C. Illegal access to private ... in the cloud. D. Running out of storage space and network bandwidth at peak usage times.

Last Answer : Illegal access to private data stored by applications in the cloud.

Which of the following dynamically grow and shrink the load-balancing capacity to adjust to traffic demands? A. Amazon Cloud-front B. Elastic Caches C. Amazon RDS D. Elastic Load Balancing

Description : Which of the following dynamically grow and shrink the load-balancing capacity to adjust to traffic demands? A. Amazon Cloud-front B. Elastic Caches C. Amazon RDS D. Elastic Load Balancing

Last Answer : Elastic Load Balancing

The capability of a system to adapt the increased service load is called ___________ a) scalability b) tolerance c) capacity d) none of the mentioned

Description : The capability of a system to adapt the increased service load is called ___________ a) scalability b) tolerance c) capacity d) none of the mentioned

Last Answer : scalability

Pick up the correct statement from the following: (A) Large solids carried along the river bed, is known as bed load (B) The fine sediment deposits are generally near the face of the dam (C) Deposition of sediment in the reservoir, reduces the capacity of the reservoir (D) All the above

Description : Pick up the correct statement from the following: (A) Large solids carried along the river bed, is known as bed load (B) The fine sediment deposits are generally near the face of ... ) Deposition of sediment in the reservoir, reduces the capacity of the reservoir (D) All the above

Last Answer : (D) All the above

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

What is the load capacity of 2x8?

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions