How can you take legal action if a company took your custom ring design with sketches you provided and started selling them to public?

How can you take legal action if a company took your custom ring design with sketches you provided and started selling them to public?
by

1 Answer

Answer :

You may have copyright protection, however, copyright law iscomplex. You should consult with an attorney who specializes incopyright law, who can review the circumstances and explain youroptions.
by
selected by

Related questions

Which statement best describes the Software as a Service cloud delivery model? A. A virtual machine provisioned and provided from the cloud which allows the customer to deploy custom applications. B. A multitenant storage service provisioned from the cloud which allows the customer to leverage the cloud for storing software data. C. A solution stack or set of middleware delivered to the client from the cloud which provides services for the design, development, and testing of industry aligned applications. D. An application delivered to the client from the cloud which eliminates the need to install and run the application on the customer's own computers and simplifying maintenance and support.

Description : Which statement best describes the Software as a Service cloud delivery model? A. A virtual machine provisioned and provided from the cloud which allows the customer to deploy custom ... and run the application on the customer's own computers and simplifying maintenance and support.

Last Answer : An application delivered to the client from the cloud which eliminates the need to install and run the application on the customer's own computers and simplifying maintenance and support.

Joan recently changed employers within the same industry. At her old company, employees routinely took home company pens, pencils, and note pads, and they frequently made personal long -distance calls on company phones. Joan observes that employees do not engage in such practices at her new company. What Joan sees could best be described as a difference in A)significant others. B)profit objectives. C)corporate culture. D)legal climate. E)corporate goals.

Description : Joan recently changed employers within the same industry. At her old company, employees routinely took home company pens, pencils, and note pads, and they frequently made personal long -distance ... A)significant others. B)profit objectives. C)corporate culture. D)legal climate. E)corporate goals

Last Answer : D)legal climate

Can anyone think of a company that started off only selling their own products but then branched out to selling competitor's products as well?

Description : Can anyone think of a company that started off only selling their own products but then branched out to selling competitor's products as well?

Last Answer : Most groceries and pharmacies sell name brands as well as their own house brands. Other companies have purchased competitors and maintained their brands.

Open Society Foundations was started in 1993 by George Soros and aimed to shape public policy to promote democratic governance, human rights, and economic, legal, and social reform. Which philosopher influenced its name and philosophy?

Description : Open Society Foundations was started in 1993 by George Soros and aimed to shape public policy to promote democratic governance, human rights, and economic, legal, and social reform. Which philosopher influenced its name and philosophy?

Last Answer : Karl Popper.

Draw neat sketches of any three shallow foundations and suggest suitability of them for different loading and soil conditions.

Description : Draw neat sketches of any three shallow foundations and suggest suitability of them for different loading and soil conditions.

Last Answer : Types of shallow foundation with their suitability: 1. Wall Footing: Wall footings are used for individual columns, walls and bridge piers where the bearing soil layer is within 3m (10 feet) from the ground surface. Soil ... bearing capacity of soil.    9. Slab Base:   10.Gusseted base:  

If my friends just started a new website, and I want to help them out, is it unethical to click on the weblinked ads if I'm minimally interested in what they're selling?

Description : If my friends just started a new website, and I want to help them out, is it unethical to click on the weblinked ads if I'm minimally interested in what they're selling?

Last Answer : I don't see why not.

Chipko Movement is an example of forest conservation through_______? a. Legislative Action b. Legal Recourse c. Public awareness and participation d. Political issue

Description : Chipko Movement is an example of forest conservation through_______? a. Legislative Action b. Legal Recourse c. Public awareness and participation d. Political issue

Last Answer : c. Public awareness and participation

I brought a girl to the ring, who took over all my friends there

Description : Hi, I'm going to the ring and I brought a girl to him. I went with her to elementary school, where everyone slandered and changed friends like shoes. She was my best friend. Ever since she's been there, ... , she, she. No one has spoken to me since she arrived. She can't make excuses. Please help.

Last Answer : Find another circle. You brought her there, so you should have thought about it in advance.

Which feature is provided by Word to customise the look of a custom shape? Write down the steps involved. -Technology

Description : Which feature is provided by Word to customise the look of a custom shape? Write down the steps involved. -Technology

Last Answer : Drawing Custom ShapesBy using the three freehand drawing tools, i.e. Curve, Freeform and Scribble desired shapes can be created.Curve lets you draw shapes that have different curves. Freeform lets you draw ... your object, to turn off Edit Points, click anywhere on the page outside of the shape.

The _______________________ is the specific mix of advertising, personal selling,sales promotion, public relations, and direct marketing tools that the company uses to pursue its advertising and marketing objectives. A. Value mix B. Integrated dealer mix C. Marketing communications mix D. Marketing control mix

Description : The _______________________ is the specific mix of advertising, personal selling,sales promotion, public relations, and direct marketing tools that the company uses to pursue its advertising and marketing ... mix B. Integrated dealer mix C. Marketing communications mix D. Marketing control mix

Last Answer : C. Marketing communications mix

Identify, from among the following, the correct statement. a) One of the main challenges Engineering facing today is the requirement of most systems to wob) ‘Legacy systems’ are custom developed systems for the legal domain c) does not wear-out in the traditional sense of the term, but does tend to deteriorate as it evolves d) Since is essentially ‘intangible’ it is relatively easy to manage projects With the advent of component based assembly, we find that onlyless than 20% of today’s is still custom builtrk with a multitude of homogenous systems

Description : Identify, from among the following, the correct statement. a) One of the main challenges Engineering facing today is the requirement of most systems to work with a multitude of  homogenous systems ... of component based assembly, we find  that onlyless than 20% of today's is still custom built

Last Answer : c) does not wear-out in the traditional sense of the term, but  does tend to deteriorate as it evolves

If Chris Bromham took off on his Yamaha and jumped a horizontal distance of 74.0 m across a row of cars and assuming that he started and landed at the same level and was airborne for 1.3 s, what was his initial (angled) velocity as he left the ground?

Description : If Chris Bromham took off on his Yamaha and jumped a horizontal distance of 74.0 m across a row of cars and assuming that he started and landed at the same level and was airborne for 1.3 s, what was his initial (angled) velocity as he left the ground?

Last Answer : I really need help. If someone can explain this to me, it'll be great!

Until the rain cycle started, there could be no life. This ____________ climate change took place when the earth was half a million years old.?

Description : Until the rain cycle started, there could be no life. This ____________ climate change took place when the earth was half a million years old.?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Kathir and Anand can do a work in 20 days and 30 days respectively. Kathir started the work and left after 4 days. Anand took over and completed the work. In how many days was the total work completed? a) 28 days b) 20 days c) 23 days d) 25 days e) 26 days

Description : Kathir and Anand can do a work in 20 days and 30 days respectively. Kathir started the work and left after 4 days. Anand took over and completed the work. In how many days was the total work completed? a) 28 days b) 20 days c) 23 days d) 25 days e) 26 days 

Last Answer : a Kathir’s one day’s work= 1/20 Kathir’s 4 day’s work =4* (1/20) = 1/5 Work left= 1-1/5 = 4 /5 Anand’s one day’s work= 1/30 Anand can do work in = (4/5) *(30/ 1) = 24 days So total days = 24+4 = 28 days

Can anyone suggest websites where I can upload my mandala sketches?

Description : Can anyone suggest websites where I can upload my mandala sketches?

Last Answer : What sort of result do you want from uploading it? Do you just want to be able to send people to a web address to look at it? Or do you want it social media feedback from random strangers? Do you have a scanner or a digital camera?

How do you get the original copies of SNL Sketches...

Description : How do you get the original copies of SNL Sketches...

Last Answer : Rip it from hulu.com :)

What is the need to ensure that sketches are of a suitable size use appropriate drawing conventions are in proportion and are legible to others?

Description : What is the need to ensure that sketches are of a suitable size use appropriate drawing conventions are in proportion and are legible to others?

Last Answer : Need answer

What is The typical ways of communicating technical information (such as sketches test and inspection reports work planning documents) and the amount of detail that should be included?

Description : What is The typical ways of communicating technical information (such as sketches test and inspection reports work planning documents) and the amount of detail that should be included?

Last Answer : Add me on xbox Gamertag = BirxlAlso your dads feminine af you little wobbly wo6.

The sketches of 9/11 victims in "Portraits of Grief"?

Description : The sketches of 9/11 victims in "Portraits of Grief"?

Last Answer : 0.8182

The four sketches (A, B, C and D) given below, represent four different types of animal tissues. Which one of these is correctly identified in the options given, along with its correct location and function? (A) (B) (C) (D) Tissue Location Function (a) (B) Glandular Intestine Secretion epithelium (b) (C) Collagen Cartilage Attach skeletal fibres muscles to bones(c) (D) Smooth Heart Heart muscle contraction tissue (d) (A) Columnar Nephron Secretion epithelium and absorption

Description : The four sketches (A, B, C and D) given below, represent four different types of animal tissues. Which one of these is correctly identified in the options given, along with its ... Smooth Heart Heart muscle contraction tissue (d) (A) Columnar Nephron Secretion epithelium and absorption

Last Answer : (a) (B) Glandular Intestine Secretion epithelium

Explain freyssinet system of prestressing with respect to process and application with sketches.

Description : Explain freyssinet system of prestressing with respect to process and application with sketches.

Last Answer : Process: - 1. The freyssinet system was the first to be introduced among the post - tensioned system high tensile steel wires 5mm to 8mm diameter about 12 in number are arranged to form a group into a cable ... gas (LNG) storage tank 4. Off share platforms. 5. Wind turbine towers etc.

Illustrate cable profiles for eccentric straight and parabolic cables with sketches.

Description : Illustrate cable profiles for eccentric straight and parabolic cables with sketches. 

Last Answer : i) Eccentric straight cable profile: The stress due to prestressing alone are generally combined stresses due to the action of direct load bending from an eccentrically applied load. In this case, the load is ... section as shown in the figure below. ii) Parabolic cable profile

Describe any four forms of ‘Rubble Masonry’ with sketches.

Description : Describe any four forms of ‘Rubble Masonry’ with sketches.

Last Answer : 1) Dry rubble masonry: - In dry rubble masonry, dressed or undressed stones are used without mortar. Bigger pieces of stones are arranged at the bottom and smaller pieces of stones are used at the top. ... should not exceed 13 mm. the stone used in this masonry should be of uniform color.  

Explain defects in timber with neat labeled sketches

Description : Explain defects in timber with neat labeled sketches

Last Answer : a) Knots: These are the bases of branches which are broken off from the tree. This occurs because of improper cutting of tree. b) Shakes: These are cracks in the timber which appear due to excessive frost or ... of timber f) Bow: This is bending along the longer side of timber.

Draw neat sketches of: (i) Conventional bricks and (ii) Standard bricks showing all the dimensions

Description : Draw neat sketches of: (i) Conventional bricks and (ii) Standard bricks showing all the dimensions

Last Answer : i) Conventional brick.   ii) Standard brick.

Explain with sketches effect of steering geometry on vehicle performance.

Description : Explain with sketches effect of steering geometry on vehicle performance.

Last Answer : The performance of vehicle is affected by steering geometry as turning ability . maneuverability , stability etc. The effects are due to change in the steering geomentry parameters like trail, cater angle or ... of dropping of steering head also increases with larger rack angles

Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Description : Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Last Answer : Procedure: 1) Remove the valve cover according to your shop manual's instructions. Don't try to hammer a screwdriver or chisel between the valve cover and the head. You will ruin the gasket surface in a ... When the clearance feels good, hold the adjusting screw, and tighten up the lock nut. 

Explain the concept of under steering and over steering with sketches.

Description : Explain the concept of under steering and over steering with sketches.

Last Answer : During turns, centrifugal force acts on the wheels. Two cases can arise: i) Oversteering: When the slip angles of the front wheels are less than those of the rear wheels, radius of the ... than it should for a given rotation of the steering wheel. This condition is called understeering.

Explain the working principle of the following dynamometers with suitable sketches, if necessary: (i) Hydraulic Dynamometer. (ii) Eddy Current Dynamometer.

Description : Explain the working principle of the following dynamometers with suitable sketches, if necessary: (i) Hydraulic Dynamometer. (ii) Eddy Current Dynamometer.

Last Answer : (i) Hydraulic Dynamometer: In principle, hydraulic dynamometer construction is similar to that of a fluid flywheel. Hydraulic dynamometer consists of an impeller or inner rotating member coupled to the output shaft ... Eddy current oppose the rotor motion thus loading the engine.

Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Description : Draw sketches showing fuel metering in the inline type F. I. P. and explain its working.

Last Answer : Fuel Metering in inline type fuel injection pump: The position of the plunger in the fuel injection pump can be varied by means of a control rod having a rack and pinion arrangement. By operating ... (vi) shows that no fuel is being supplied to the injector; i. e. the engine has stopped.

Describe working principle of four stroke diesel engine with the help of sketches.

Description : Describe working principle of four stroke diesel engine with the help of sketches.

Last Answer : Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. The piston moves from TDC to BDC and crank shaft rotates through 180˚. The downward movement of ... the burnt gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 720. 

Explain the significance of gating system in casting process with the sketches.

Description : Explain the significance of gating system in casting process with the sketches.

Last Answer : Significance of Gating system in casting process: The term gating system refers to all passageways through which the molten metal passes to enter the mold cavity. It provides continuous, uniform feed of ... walls. It prevents slag, sand and other foreign particles from entering the mould.

List types of joints with sketches.

Description : List types of joints with sketches.

Last Answer : Types of joints are 1. Strike Joint 2. Dip Joint 3. Oblique Joint 4. Tension Joint 5. Shear Joint

Explain the determination of liquid limit of soil with neat sketches.

Description : Explain the determination of liquid limit of soil with neat sketches.

Last Answer : Procedure of Liquid Limit Test: 1. Take about 120 gm. of air dried soil sample passing through 425 micron IS sieve in metal tray. Add 20 % distilled water to the soil sample to form uniform soil ... content corresponding to 25 blows from graph as liquid limit (WL) of given soil sample.  

Explain various configurations with sketches

Description : Explain various configurations with sketches

Last Answer : Robot Configurations 1) Rectangular Configuration:- This uses three perpendicular slides to construct the x, y, z axes. By moving three slides relative to one another, the robot is capable of ... , which provides a substantial rigidity in the vertical direction for many essential tasks.  

State any four characteristics of contours with sketches.

Description : State any four characteristics of contours with sketches.

Last Answer : Characteristics of contours - The characteristics of contours are described in following statements with the help of necessary sketches. 1. All the points on contour line represent same reduced level or equal ... 8. The summit of four ridge lines represents saddle as shown in sketch 8.

Explain following constructional details of CNC machines with neat sketches. (i) Hydrostatic slideways (ii) Recirculating ball screw and nut

Description : Explain following constructional details of CNC machines with neat sketches. (i) Hydrostatic slideways (ii) Recirculating ball screw and nut

Last Answer : (i) Hydrostatic slideways: In hydrostatic slideways, air or oil is pumped into small pockets or cavities into the carrieage or slides which are in contact with the slide ways. The pressure of ... nut strokes on the screw shaft, the balls repeat the same recirculation inside the return tube. 

Draw the simple labeled sketches showing forging sequence for manufacturing Gears.

Description : Draw the simple labeled sketches showing forging sequence for manufacturing Gears.

Last Answer : Forging Sequence for Manufacturing Gears: i) The size of the heated stock is reduced with compensation of its length i.e. Upsetting is carried out.  ii) After heading or upsetting, stock is ... next impression or blocking die   iv) Then the finished part is trimmed in blanking die  

Which is the least important factor in teaching? Options: A) Punishing the students B) Maintaining discipline in the class C) Lecturing in impressive way D) Drawing sketches and diagrams on the black-board

Description : Which is the least important factor in teaching? Options: A) Punishing the students B) Maintaining discipline in the class C) Lecturing in impressive way D) Drawing sketches and diagrams on the black-board 

Last Answer : A) Punishing the students 

Which is the least important factor in teaching? (A) punishing the students (B) maintaining discipline in the class (C) lecturing in impressive way (D) drawing sketches and diagrams on the black-board

Description : Which is the least important factor in teaching? (A) punishing the students (B) maintaining discipline in the class (C) lecturing in impressive way (D) drawing sketches and diagrams on the black-board

Last Answer : (A) punishing the students

Explain the sketches , the working principle of Bourdon tube.

Description : Explain the sketches , the working principle of Bourdon tube.

Last Answer : Working principle of Bourdon tube:- C type bourdon tube is made up of an elliptically flattened tube bent in such a way as to produce the C shape as shown in the fig. One ... terms of pressure. The relationship between the displacement of the free end and the applied pressure is nonlinear.

Draw neat sketches for following lines (1) Section line (2) Hidden line (3) Dimension line (4) Extension line

Description : Draw neat sketches for following lines (1) Section line (2) Hidden line (3) Dimension line (4) Extension line

Last Answer : (a) Hidden Line 

State the classification of losses in pipe with suitable sketches and equations for each.

Description : State the classification of losses in pipe with suitable sketches and equations for each.

Last Answer : Major loss: The major loss of head is caused due to friction when fluid flow through a pipe. Minor loss: The minor loss of head is caused due to change in velocity of flowing fluid either in magnitude or ... . Loss of head due to obstruction.  6. Loss of head due to pipe fitting.

Explain the concept and use of pressure diagram with neat sketches.

Description : Explain the concept and use of pressure diagram with neat sketches.

Last Answer : Pressure diagram is defined as It is the graphical representation of variation of pressure on the surface with depth . The total pressure per unit length is the area of pressure diagram. The position of ... sluice gate, side and bottom of water tank. v. To find position of centre of pressure. 

Draw a neat and labelled sketches of following: i) Plan of column formwork. ii) Expansion joint with load transfer device.

Description : Draw a neat and labelled sketches of following: i) Plan of column formwork. ii) Expansion joint with load transfer device.

Last Answer : i) Plan of column formwork. ii) Expansion joint with load transfer device.

Explain the technique and ways of measuring ultrasonic pulse velocity through concrete. Draw sketches.

Description : Explain the technique and ways of measuring ultrasonic pulse velocity through concrete. Draw sketches.

Last Answer : Methods of measuring ultrasonic pulse velocity 1. Direct transmission 2. Indirect transmission 3. Surface transmission Direct transmission- The transmitting and receiving transducers are placed on opposite ... or either side of surfaces of the concrete slab as shown in figure below.

Define force system. Explain three force systems with sketches.

Description : Define force system. Explain three force systems with sketches. 

Last Answer : When two or more forces acting on a body, they are said to form a system of forces or force system.  Force systems with sketches: 1. Coplanar Collinear force system: The force system in ... planes and they do not possess one single point of concurrency are known as General force system.

Describe with sketches the procedure to troubleshoot the traffic light controller.

Description : Describe with sketches the procedure to troubleshoot the traffic light controller.

Last Answer : Considerations of Traffic Signal  1) Traffic light may have sensors integrated to provide real time traffic information  2) Based on the traffic information provided by the sensor, the duration of the ... 8) Capacity analysis of the intersection for current and future years using growth