Description : An object is 60 cm in front of a thin lens, the image being 300 cm on the other side of the lens. Calculate the displacement of the image, when the ob
Last Answer : An object is 60 cm in front of a thin lens, the image being 300 cm on the other side of the ... when the object is moves 20 cm nearer to the lens.
Description : The result is 1350, but I don't know how to get there :) Thank you for the answers :)
Last Answer : We express an unknown x. The initial share first decreased by 20% (1-20 / 100) and then this new price increased by 20% (1 + 20/100) and the resulting share price is 1296. x * (1 - 20/100) * (1 + 20/100) = 1296 x * (0.8) * (1.2) = 1296 x 0.96 = 1296 x = 1296: 0.96 x = 1350
Description : I just need to know a formula, or a lot more formulas, but there are always both unknowns in a formula.
Last Answer : I don't know how to fix it ... you have to do it yourself
Description : A metallic wire of length 1 m is stretched to duble its length. Calculate the ratio of its initial and final resistances assuming that there is no cha
Last Answer : A metallic wire of length 1 m is stretched to duble its length. Calculate the ratio of its ... there is no change in its density on stretching.
Description : Shortest distance from the initial to the final position of a body is called?
Last Answer : Displacement.
Description : What is Path of Removal: A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth B. The movement of the appliance from the points of initial contacts to path of final rest position
Last Answer : A. The appliances movement from the rest position to the last contacts of its rigid parts with the supporting teeth
Description : What is Path of Insertion A. The movement of the appliance from the points of initial contacts to path of final rest position B. The movement of the appliance from the points of rest position until it is not in contact with teeth
Last Answer : A. The movement of the appliance from the points of initial contacts to path of final rest position
Description : What steps shall be required to rotate an object about the point P1 (as shown in fig.1) and its placement such that what was at P1 is now reduced and is at P2 (as shown in fig.2). I. Translate P1 to origin II. ... (A) I,II and III (B) II,III and IV (C) I,III and IV (D) All of the above
Last Answer : Answer: Marks given to all
Description : An object is placed at `0.06` m from a convex lens of focal length `0.1`m. Calculate the position of the image?
Last Answer : An object is placed at `0.06` m from a convex lens of focal length `0.1`m. Calculate the position of the image?
Description : Calculate the frequency at which the conduction and displacement currents become equal with unity conductivity in a material of permittivity 2. a) 18 GHz b) 9 GHz c) 36 GHz d) 24 GHz
Last Answer : b) 9 GHz
Description : Calculate the displacement current density when the electric flux density is 20sin 0.5t. a) 10sin 0.5t b) 10cos 0.5t c) 20sin 2t d) 20cos 2t
Last Answer : b) 10cos 0.5t
Description : Calculate the displacement value of zinc oxide from following data
Last Answer : i) Capacity of mould = 15 grain ii) Wt. of 6 unmedicated suppositories = 90 grain iii) Wt. of six suppositories containing 40% zinc oxide = 132 grain. Note: student may use grain value as 65 mg and ... Medicament Amount of base without drug - actual amount base 3.4212 / 0.7002 = 4.886 = Approx.5
Description : The maximum displacement of the particle on either side of the equilibrium position is called
Last Answer : amplitude.
Description : SHM is the motion in which acceleration of the body is proportional to its displacement and directed towards the mean position. A. True B. False C. Neither True Nor False D. None
Last Answer : A. True
Description : While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of ... true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm
Last Answer : (B) 0.15 cm
Description : 11. If a body floating in a liquid does not return back to its original position and heels farther "away when given a small angular displacement, the body is said to be in neutral equilibrium. A) Yes B) No
Last Answer : B
Description : If a body floating in a liquid returns back to its original position, when given a small angular displacement, the body is said to be in (A) Neutral equilibrium (B) Stable equilibrium (C) Unstable equilibrium (D) None of these
Last Answer : Answer: Option B
Description : If a body floating in a liquid occupies a new position and remains at rest in this new position, when given a small angular displacement, the body is said to be in __________ equilibrium. (A) Neutral (B) Stable (C) Unstable (D) None of these
Last Answer : Answer: Option A
Description : The maximum displacement of a vibrating body on either side of its central position is known as _______________. a)amplitude b)frequency c)time period d)hertz
Last Answer : a)amplitude
Description : A body which is attached to a spring undergoes simple harmonic motion. The magnitude of the body's acceleration is: w) constant x) proportional to its displacement from its equilibrium position y) zero z) always increasing.
Last Answer : ANSWER: X -- PROPORTIONAL TO ITS DISPLACEMENT FROM ITS EQUILIBRIUM POSITION
Description : An 8 kilogram mass resting on a frictionless horizontal surface is attached to a spring with a force constant of 50 Newtons per meter. If the velocity of the mass through the equilibrium position is 5 meters per second, what is the mass's maximum displacement from equilibrium?
Last Answer : ANSWER: 2 METERS
Description : The distance moved and the magnitude of displacement are equal in ? (a) The earth is revolving around the Sun (b) Object moving in circular path (c) The pendulum is moving to and fro (d) Object moving on straight road -Science
Last Answer : (d) only. Distance and displacement in all other cases
Description : If an object floats the volume of the displacement water is equal to the volume of the whole object?
Last Answer : False - Apex
Description : If an object moves a circular distance ‘s’ of radius ‘r’, then it's angular displacement is A. s⁄r B. r⁄s C. rs D. r2s
Last Answer : s⁄
Description : Angle through which an object has moved is called it's A. linear displacement B. linear distance C. angular displacement D. angular distance
Last Answer : angular displacement
Description : When H is the flight height, R is the appropriate radial measure and d is the relief displacement, the vertical height of an object appearing on an aerial photograph is
Last Answer : dH/R
Description : Frame the formula: final velocity (v) of a body in linear motion is equal to the sum of its initial velocity (u) and the product of acceleration (a) a
Last Answer : Frame the formula: final velocity (v) of a body in linear motion is equal to the sum of its initial velocity (u) and ... v=u-at C. v=u+at D. v=-u-at
Description : For a two stage compressor, the ratio of diameter of low pressure cylinder to high pressure cylinder is equal to A. Square of the ratio of final pressure to initial pressure B. The ratio of ... final pressure to initial pressure D. Cube root of the ratio of final pressure to initial pressure
Last Answer : ANSWER : C
Description : Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not ... for the finishing cut D. course lapping compound, followed by a medium and then a fine grade
Last Answer : Answer: B
Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec
Last Answer : (A) kW. sec/kg
Description : Local localization follows the location of a robots from A : Initial Point B : Final Point C : Middle point D : End point
Last Answer : A : Initial Point
Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction
Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction
Description : A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the ... S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR
Last Answer : (C) Δ S1is always > Δ SR
Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic
Last Answer : (C) Geometric
Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K
Last Answer : (C) 274 K
Description : A machine has an initial value of Rs. 5000, service life of 5 years and final salvage value of Rs. 1000. The annual depreciation cost by straight line method is Rs. (A) 300 (B) 600 (C) 800 (D) 1000
Last Answer : (C) 800
Description : As compared to ordinary Portland cement, high alumina cement has (A) Higher initial setting time but lower final setting time (B) Lower initial setting time but higher final setting time (C) Higher initial and final setting times (D) Lower initial and final setting times
Description : Pick up the correct statement regarding low heat cement from the following: (A) It possesses less compressive strength (B) Its initial setting time is about one hour (C) Its final setting time is about 10 hours (D) All the above
Last Answer : Answer: Option D
Description : “The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as: A. Dulong’s Law B. Dalton’s Law C. Hess’s Law D. Petit Law
Last Answer : Hess’s Law
Description : Carnot cycle efficiency is maximum when (a) initial temperature is 0°K (b) final temperature is 0°K (c) difference between initial and final temperature is 0°K (d) final temperature is 0°C (e) initial temperature is minimum possible.
Last Answer : Answer : b
Description : A shopkeeper gives 12% additional discount on the discounted price, after giving an initial discount of 20% on the labeled price of a mobile. If the final sale price of the mobile is 704. then what is its labelled price? A. Rs 844 B. Rs 920 C. Rs 1000 D. Rs 1100
Last Answer : Answer – C. Rs 1000 Explanation – Let the labeled price be Rs. x 88% of 80% of x = 704 => x = (704 x 100 x 100/88 x 80)= 1000.
Description : what causes the initial and final pulses on the receiver output signal?
Last Answer : Leakage from the duplexer.
Description : What are the initial and final torque values for A321 main landing gear wheels?
Last Answer : The initial or bearing setting torque value for A321 main landing gear wheel is 310 ft.-lbs. and the final torque value is 160 ft.-lbs.
Description : If a variable is declared final, it must include ...................... value. A) integer B) no C) initial D) float
Last Answer : C) initial
Description : The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux
Last Answer : d. constant magnetic flux
Description : One kg of gas occupying 0.1m^3 at pressure of 14 bar is expanded at constant pressure to 0.2m^3. Determine an initial and final temperature of gas. Take Cp=1.008KJ/KgK, Cv =0.72KJ/KgK.
Last Answer : V1=0.1m^3 V2=0.2 m^3 P1=P2=14 bar Cp=1.008 KJ/KgK Cv=0.72 KJ/KgK R=Cp-Cv R=1.008-0.72 R=0.288KJ/KgK Characteristic gas equation, P1V1=mRT1 14*10^5*0.1=1*288*T1 T1=486.11K For constant pressure process, V1/T1=V2/T2 0.1/486.11=0.2/T2 T2=972.22K
Description : Given a Non-deterministic Finite Automation (NFA) with states p and r as initial and final states respectively transition table as given below The minimum number of states required in Deterministic Finite Automation (DFA) equivalent to NFA is (A) 5 (B) 4 (C) 3 (D) 2
Last Answer : (C) 3
Description : What are the final values of Q1 and Q0 after 4 clock cycles, if initial values are 00 in the sequential circuit shown below: (A) 11 (B) 10 (C) 01 (D) 00
Last Answer : (D) 00
Description : There are three processes P1, P2 and P3 sharing a semaphore for synchronising a variable. Initial value of semaphore is one. Assume that negative value of semaphore tells us how many processes are waiting in queue. Processes access ... The final value of semaphore will be: (1) 0 (2) 1 (3) -1 (4) -2
Last Answer : Answer: 1