What is superimposed mild levoscoliotic curvature of L5-S1?

What is superimposed mild levoscoliotic curvature of L5-S1?
by

1 Answer

Answer :

Need answer
by
selected by

Related questions

What does small inferiorly migrating left paracentral disc protusion at L5-S1 mean?

Description : What does small inferiorly migrating left paracentral disc protusion at L5-S1 mean?

Last Answer : It means the disk between lumbar 5 and sacral 1 is moving downon the left-center portion of the disk from where it's supposed tobe. If you are having low Back pain, this is likely a cause.

Where is l5 and s1 located?

Description : Where is l5 and s1 located?

Last Answer : Feel Free to Answer

What does air in the L5-S1 facets mean?

Description : What does air in the L5-S1 facets mean?

Last Answer : It means that there is fluid in the disc in the degenerative spine.

What does mild disc space narrowing posterior aspect L4-L5 level. Rudimentary disc at L5-S1mean?

Description : What does mild disc space narrowing posterior aspect L4-L5 level. Rudimentary disc at L5-S1mean?

Last Answer : Need answer

A sewer running partially full and hurried with back filled, fails in compression due to A. Weight of the pipe B. Weight of the back fill C. Superimposed traffic loads D. All the above

Description : A sewer running partially full and hurried with back filled, fails in compression due to A. Weight of the pipe B. Weight of the back fill C. Superimposed traffic loads D. All the above

Last Answer : ANS: D

Another SEG function that allows a person to be superimposed on another scene. A. Visual effect B. Wiper C. Chroma keying D. Special effect generation

Description : Another SEG function that allows a person to be superimposed on another scene. A. Visual effect B. Wiper C. Chroma keying D. Special effect generation

Last Answer : C. Chroma keying

If harmonic motion of same frequency and same phase are superimposed in two perpendicular directions ( x and y) then, the resultant motion will be, A) circle B) An ellipse C) An square D) An rectangle

Description : If harmonic motion of same frequency and same phase are superimposed in two perpendicular directions ( x and y) then, the resultant motion will be, A) circle B) An ellipse C) An square D) An rectangle

Last Answer : C) An square

A molecule is said to be chiral (a) if it contains plane of symmetry (b) if it contains centre of symmetry (c) if it cannot be superimposed on its mirror image (d) if it can be superimposed on its mirror image

Description : A molecule is said to be chiral (a) if it contains plane of symmetry (b) if it contains centre of symmetry (c) if it cannot be superimposed on its mirror image (d) if it can be superimposed on its mirror image

Last Answer : if it cannot be superimposed on its mirror image

The superimposed load transmitted to the pipe, is generally evaluated by Business formula (A) pt = 3H 3P/2 (B) pt = 3H 3P/2 5 (C) pt = 3H 3P/2 2 (D) pt = 3H 3P 2 /2 3

Description : The superimposed load transmitted to the pipe, is generally evaluated by Business formula (A) pt = 3H 3P/2 (B) pt = 3H 3P/2 5 (C) pt = 3H 3P/2 2 (D) pt = 3H 3P 2 /2 3

Last Answer : (B) pt = 3H 3P/2 5 (C) pt = 3H 3P/2 2

What is INCORRECT in HIV associated periodontitis:** A. Picture of ANUG superimposed with RPP B. Spontaneous bleeding interproximal C. Depression of T4/T8 lymphocytes D. Deep Perio-pockets usually seen in advanced periodontitis

Description : What is INCORRECT in HIV associated periodontitis:** A. Picture of ANUG superimposed with RPP B. Spontaneous bleeding interproximal C. Depression of T4/T8 lymphocytes D. Deep Perio-pockets usually seen in advanced periodontitis

Last Answer : C. Depression of T4/T8 lymphocytes

When the incisive foramen is superimposed over the apex on a radiograph it may be mistaken to be a: A. Cyst B. Cementoma C. Odontoma

Description : When the incisive foramen is superimposed over the apex on a radiograph it may be mistaken to be a: A. Cyst B. Cementoma C. Odontoma

Last Answer : A. Cyst

Isomers which are chemically identical but cannot be superimposed on each other are called what?

Description : Isomers which are chemically identical but cannot be superimposed on each other are called what?

Last Answer : ANSWER: STEREOISOMERS or ENANTIOMERS

Which is better? (1) Kicker L5 15" subwoofer or (2) Kicker L5 12"?

Description : Which is better? (1) Kicker L5 15" subwoofer or (2) Kicker L5 12"?

Last Answer : I’d take 2 12’s over one 15 any day. It really depends what you’re looking for. The 15 will be just plain loud, but two 12’s will most likely give you clearer, more punchy bass. Hope this helps!

I have an 8mm herniated disk (L5) and still have pain after a year. Will I have a chance to heal without surgery?

Description : I have an 8mm herniated disk (L5) and still have pain after a year. Will I have a chance to heal without surgery?

Last Answer : My dads been having a herniated disc since 1983. He got shot and still to this day he is constantly complaining about the pain :(

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: D

The population of India is about 1.2 billion. Take the average consumption of energy per person per year in India as 30 Mega Joules. If this consumption is met by carbon based fuels and the rate of carbon emissions per kilojoule is l5 x I0 6 kgs, the total carbon emissions per year from India will be (A) 54 million metric tons (B) 540 million metric tons (C) 5400 million metric tons (D) 2400 million metric tons

Description : The population of India is about 1.2 billion. Take the average consumption of energy per person per year in India as 30 Mega Joules. If this consumption is met by carbon based fuels and the rate of ... tons (B) 540 million metric tons (C) 5400 million metric tons (D) 2400 million metric tons 

Last Answer : (B) 540 million metric tons

Consider the following python code and write the output for statement S1 import pandas as pd -Technology

Description : Consider the following python code and write the output for statement S1 import pandas as pd -Technology

Last Answer : 0.50 8.00.75 11.0

Given the following Series S1 and S2: Write the command to find the sum of series S1 and S2 -Technology

Description : Given the following Series S1 and S2: Write the command to find the sum of series S1 and S2 -Technology

Last Answer : print(S1+S2)

The called party / caller does not hear me, but the call recorder works, send for warranty repair? (Lenovo Vibe S1) factory settings helped for 3 weeks

Description : - Callrecorder works smoothly (ie the microphone is fully functional)

Last Answer : Need Answer

When appointing a sponsor for a soldier the battalion s1 should mail a welcome letter and appoint a sponsir winthin how many days?

Description : When appointing a sponsor for a soldier the battalion s1 should mail a welcome letter and appoint a sponsir winthin how many days?

Last Answer : Need answer

The Garmin Approach S1 GPS Watch?

Description : The Garmin Approach S1 GPS Watch?

Last Answer : There are a lot of things to be said about having your GPS coordinates easily visible on the back of your wrist. This is especially true when you're out in the wilderness-- even for a ... you abreast of any changes in your coordinates throughout your entire trek, keeping you safe and on track.

S1 nuclease hydrolyses (A) DNA of somatic cells (B) DNA of sperms (C) Any double stranded DNA (D) Any single stranded DNA

Description : S1 nuclease hydrolyses (A) DNA of somatic cells (B) DNA of sperms (C) Any double stranded DNA (D) Any single stranded DNA

Last Answer : Answer : D

If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter

Description : If is the rugosity coefficient, is the bed slope of sewer, the velocity of flow in m/sec may be obtained by the formula V = (1/n) r2/3 s1/2 evolved by A. Chezy B. Manning C. Bazin D. Kutter

Last Answer : ANS: B

Regarding the illustrated electrical schematic, 'S1-P', 'S1-Q', and 'S1-R' represent ____________. EL-0016 A. capacitors B. normally-closed contacts C. normally-open contacts D. normally-closed pushbutton switches

Description : Regarding the illustrated electrical schematic, 'S1-P', 'S1-Q', and 'S1-R' represent ____________. EL-0016 A. capacitors B. normally-closed contacts C. normally-open contacts D. normally-closed pushbutton switches

Last Answer : Answer: C

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter by design, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter by design, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz supply ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: B

The direction of rotation of the winch shown in the illustration is changed by reversing the _____________. EL-0102 A. direction of current through the shunt field B. polarity of voltage at 'S1' and 'S2' C. direction of current through the armature D. polarity of voltage at 'L1' and 'L2'

Description : The direction of rotation of the winch shown in the illustration is changed by reversing the _____________. EL-0102 A. direction of current through the shunt field B. polarity of voltage at 'S1' and 'S2' C. direction of current through the armature D. polarity of voltage at 'L1' and 'L2'

Last Answer : Answer: C

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration were in 180 degree error with those of the transmitter, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz connections to 'S1' and 'S2'. B. No action is needed as this is proper operation. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration were in 180 degree error with those of the transmitter, what corrective action should be taken? EL-0092 A. Reverse the 60 Hz ... is proper operation. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: A

If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration were in 180 degree error with respect to that of the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is proper operation. B. Reverse the 60 Hz supply connections at 'R1' and 'R2'. C. Interchange connections 'S1' and 'S2'. D. Interchange connections 'S1' and 'S3'.

Description : If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration were in 180 degree error with respect to that of the transmitter, what corrective action should be taken? EL-0092 A. No action is ... and 'R2'. C. Interchange connections 'S1' and 'S2'. D. Interchange connections 'S1' and 'S3'.

Last Answer : Answer: B

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: C

If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration turned opposite of that in the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is normal operation. B. Reverse 60 Hz supply connections to 'R1' and 'R2'. C. Interchange connections to 'S1' and 'S2'. D. Interchange connections to 'S1' and 'S3'.

Description : If coil 'R1-R2' at the receiver of figure 'A' shown in the illustration turned opposite of that in the transmitter, what corrective action should be taken? EL-0092 A. No action is necessary as this is ... . C. Interchange connections to 'S1' and 'S2'. D. Interchange connections to 'S1' and 'S3'.

Last Answer : Answer: D

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions ... statements are true ? e) S1 only f) S1 and S2 g) S1 and S3 h) S2 only Answer: (d) S2 o

Last Answer : h) S2 only

If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many solutions Statement 3 : The equations satisfying the condition are parallel Which of the above statements are true ? a) S1 only b) S1 and S2 c) S1 and S3 d) S2 only

Description : If = = in the system of equations a 1 x + b 1 y + c 1 = 0 and a 2 x + b 2 y + c 2 = 0 Statement 1 : This is the condition for inconsistent equations Statement 2 : There exists infinitely many ... parallel Which of the above statements are true ? a) S1 only b) S1 and S2 c) S1 and S3 d) S2 only

Last Answer : d) S2 only

Derivation of Thiem's formula Q = 2 (s1 - s2)/2.3 log10 (r2/r1) is based on the assumption (A) The aquifer is homogeneous, isotropic and of infinite depth and area (B) The well is sunk through the full depth of the aquifer (C) The flow lines are radial and horizontal, and the flow is laminar (D) All the above

Description : Derivation of Thiem's formula Q = 2 (s1 - s2)/2.3 log10 (r2/r1) is based on the assumption  (A) The aquifer is homogeneous, isotropic and of infinite depth and area  (B) The well is sunk ... (C) The flow lines are radial and horizontal, and the flow is laminar  (D) All the above 

Last Answer : (D) All the above 

S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For discharge Q and coefficient of transmissibility T, the relationship, is (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1) (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) (C) S2 - S1 = (2.3Q/4 ) loge (t2/t1) (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Description : S1 and S2 are the draw downs in an observation well at times t1 and t2 after pumping. For  discharge Q and coefficient of transmissibility T, the relationship, is  (A) S2 - S1 = (2.3Q/ ) log10 (t2/t1)  (B) S2 - S1 ... - S1 = (2.3Q/4 ) loge (t2/t1)  (D) S2 - S1 = (2.3Q/4 ) loge (t1/t2

Last Answer : (B) S2 - S1 = (2.3Q/4 ) log10 (t2/t1) 

A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the irreversible and reversible processes respectively) (A) Δ S1is always < Δ SR (B) Δ S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Description : A system undergoes a change from a given initial state to a given final state either by an irreversible process or by a reversible process, then (where, Δ S1 and Δ SR are the entropy changes of the system for the ... S1is sometimes > Δ SR (C) Δ S1is always > Δ SR (D) Δ S1is always = Δ SR

Last Answer : (C) Δ S1is always > Δ SR

the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable (A) The aquifer is homogeneous and isotropic (B) Flow lines are radial and horizontal (C) The slope of the water surface is too small (D) The well has been sunk up to the surface of the unconfined aquifer

Description : the derivation of Thiem's formula, Q = (S1 - S2)/[2.3 log10( / )] the following assumption is not applicable (A) The aquifer is homogeneous and isotropic (B) Flow lines are radial and ... the water surface is too small (D) The well has been sunk up to the surface of the unconfined aquifer

Last Answer : Answer: Option D

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

With the inputs shown below, what will be the output of S1, S2, and C2?

Description : With the inputs shown below, what will be the output of S1, S2, and C2?

Last Answer : MSD of the sum.

What happens to the path for current when S1 is open as shown in figure 3-2(A)?

Description : What happens to the path for current when S1 is open as shown in figure 3-2(A)?

Last Answer : The path for current is incomplete; or, there is no path for current with S1 open.

______ input is available, so that another coprocessor can be connected and function in _________ with the 8087. . a) RQ/GT0, parallel b) RQ/GT1, parallel c) QS1 & QS0, parallel d) S0 & S1, parallel.

Description : ______ input is available, so that another coprocessor can be connected and function in _________ with the 8087. . a) RQ/GT0, parallel b) RQ/GT1, parallel c) QS1 & QS0, parallel d) S0 & S1, parallel.

Last Answer : a) RQ/GT0, parallel

S1 : Film theory is an academic discipline that aims .

Description : . S1 : Film theory is an academic discipline that aims to explore the essence of cinema and provides conceptual frameworks for understanding a film's relationship to reality, other arts, individual ... the process of analysing a film in terms of mise-enscene, cinematography, sound and editing.

Last Answer : (3) PRQ

32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Description : 32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Last Answer : C. Only third harmonic

[31] With both S1 and S2 open, the core flux waveform will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. peaky with third-harmonic D. none of these

Description : [31] With both S1 and S2 open, the core flux waveform will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. peaky with third-harmonic D. none of these

Last Answer : B. Flat topped with third harmonic

The statements s1 and s2 are given as: s1: Context sensitive languages are closed under intersection, concatenation, substitution and inverse homomorphism. s2: Context free languages are closed under complementation, substitution and homomorphism. Which of the following is correct statement? (A) Both s1 and s2 are correct. (B) s1 is correct and s2 is not correct. (C) s1 is not correct and s2 is correct. (D) Both s1 and s2 are not correct.

Description : The statements s1 and s2 are given as: s1: Context sensitive languages are closed under intersection, concatenation, substitution and inverse homomorphism. s2: Context free languages are closed under complementation, ... is not correct and s2 is correct. (D) Both s1 and s2 are not correct.

Last Answer : (B) s1 is correct and s2 is not correct.

A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one element (s2) if δ(q, λ, b) is not empty then δ(q, c, b) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Description : A pushdown automation M = (Q, Σ, Γ, δ, q0, z, F) is set to be deterministic subject to which of the following condition(s), for every q ∈ Q, a ∈ Σ ∪ {λ} and b ∈ Γ (s1) δ(q, a, b) contains at most one ... ) must be empty for every c ∈ Σ (A) only s1 (B) only s2 (C) both s1 and s2 (D) neither s1 nor s2

Last Answer : (C) both s1 and s2

Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue may be complex structures that are ordered on one or several fields. Which of the following is correct? (A) Both S1 and S2 are incorrect. (B) S1 is correct and S2 is incorrect. (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Description : Consider the following statements for priority queue: S1: It is a data structure in which the intrinsic ordering of the elements does determine the result of its basic operations. S2: The elements of a priority queue ... . (C) SI is incorrect and S2 is correct. (D) Both S1 and S2 are correct.

Last Answer : (D) Both S1 and S2 are correct.

Which is the correct statement(s) for Non Recursive predictive parser? S1: First(α) = {t | α => * t β for some string β } => *tβ S2: Follow(X) = { a | S => * αXa β for some strings α and β } (A) Both statements S1 and S2 are incorrect. (B) S1 is incorrect and S2 is correct. (C) S1 is correct and S2 is incorrect. (D) Both statements S1 and S2 are correct.

Description : Which is the correct statement(s) for Non Recursive predictive parser? S1: First(α) = {t | α => * t β for some string β } => *tβ S2: Follow(X) = { a | S => * αXa β for some strings ... and S2 is correct. (C) S1 is correct and S2 is incorrect. (D) Both statements S1 and S2 are correct. 

Last Answer : (D) Both statements S1 and S2 are correct.