Description : Pick out the wrong statement. (A) Addition polymers are generally formed by chain growth polymerisation (B) Condensation polymers are generally formed by step growth polymerisation (C) Teflon is formed by step growth polymerisation (D) Bakelite is formed by step growth polymerisation
Last Answer : C) Teflon is formed by step growth polymerisation
Description : Which of the following is obtained by condensation polymerisation?
Last Answer : Which of the following is obtained by condensation polymerisation? A. Polyethene B. Teflon C. Phenol formaldehyde resin D. Nitrile rubber
Description : The polymer obtained from condensation polymerisation of sebacic acid and hexamethylenediamine is called:
Last Answer : The polymer obtained from condensation polymerisation of sebacic acid and hexamethylenediamine is called: A. ... nylon-6 C. nylon-610 D. dacron
Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer
Last Answer : (B) Employs condensation polymerisation
Description : In step growth polymerisation, condensation occurs in a stepwise manner with or without the elimination of smaller molecules. An example of step growth polymerisation product is (A) Terylene (B) Polybutadiene (C) PVC (D) Polypropylene
Last Answer : (A) Terylene
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these
Last Answer : (D) None of these
Description : Condensation polymerisation of caprolactam is carried out in the reactor maintained at a temperature of __________ °C for producing nylon- 6. (A) -20 to 25 (B) 50 to 75 (C) 100 to 150 (D) 250-280
Last Answer : (D) 250-280
Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved
Last Answer : (C) The monomers contain two functional groups
Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66
Last Answer : (B) Bakelite
Description : Condensation polymerisation is not involved in the manufacture of (A) Teflon (B) Polythene (C) Terylene (D) Nylon
Last Answer : (B) Polythene
Description : . Polyvinyl chloride (PVC) is (A) A thermosetting material (B) A condensation polymerisation product (C) Made by employing emulsion polymerisation (D) None of these
Last Answer : (C) Made by employing emulsion polymerisation
Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99
Last Answer : (C) 90
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at a temperature of __________ °C. (A) -5 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (C) 250-280
Description : Polythene is a/an (A) Addition polymerisation product (B) Condensation polymerisation product (C) Thermosetting material (D) None of these
Last Answer : (A) Addition polymerisation product
Description : Condensation polymerisation of formaldehyde with __________ does not produce phenolic resin. (A) Resorcinol (B) Phenol (C) Para-cresol (D) Melamine
Last Answer : (D) Melamine
Description : Condensation polymerisation of __________ produces Bakelite. (A) Propylene (B) Phenol & formaldehyde (C) Phenol & acetaldehyde (D) Urea & formaldehyde
Last Answer : (B) Phenol & formaldehyde
Description : __________ resins are produced by the condensation polymerisation of formaldehyde with urea or melamine. (A) Epoxy (B) Amino (C) Alkyd (D) Phenolic
Last Answer : (B) Amino
Description : Which of the following is produced by condensation polymerisation? (A) Bakelite (B) Polythene (C) Poly vinyl chloride (D) Polystyrene
Last Answer : (A) Bakelite
Description : Polythene is a/an __________ polymerisation product. (A) Addition (B) Condensation (C) Thermosetting (D) None of these
Last Answer : (A) Addition
Description : 90% of the caprolactam is converted to nylon-6 on its condensation polymerisation in the reactor maintained at __________ °C. (A) < 0 (B) 10-30 (C) 250-280 (D) 500-600
Last Answer : (B) 10-30
Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material
Description : Differentiate between addition and condensation polymerisation process with suitable examples.
Last Answer : Addition polymerization Condensation polymerization 1)the polymerization reaction involves the joining of unsaturated monomers by breaking of bonds in a chain like manner without loss of any by ... thermosetting polymers Example: pvc(poly vinyl chloride) Example: formaldehyde
Description : The process involved in making soap is (1) saponification (2) hydrolysis (3) condensation (4) polymerisation
Last Answer : saponification
Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused
Last Answer : (B) More brittle
Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these
Last Answer : (B) Have three dimensional structure
Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction
Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction
Description : Which of the following natural bio polymers are formed as a result of polymerisation of amino-acids? (A) Starch (B) Cellulose (C) Proteins (D) Nucleic acids
Last Answer : (C) Proteins
Description : The chitinous exoskeleton of arthropods is formed by the polymerisation of (a) N - acetyl glucosamine (b) lipoglycans (c) keratin sulphate and chondroitin sulphate (d) D - glucosamine.
Last Answer : (a) N - acetyl glucosamine
Description : Coacervates were formed by a) DNA b) Radiations c) Polymerization d) Polymerisation and aggregation
Last Answer : d) Polymerisation and aggregation
Description : The flat like structures formed due to condensation of gaseous clouds after big-bong where called as :
Last Answer : The flat like structures formed due to condensation of gaseous clouds after big-bong where called as : A. Planets B. Sun C. Nebula D. Galaxy
Description : In the scheme given below, the total number of intramolecular aldol condensation products formed from (Y) is
Last Answer : In the scheme given below, the total number of intramolecular aldol condensation products formed from (Y) is
Description : Total aldol condensation products (including stereosimers) formed by the reaction between acetaldehyde and acetophenone is :
Last Answer : Total aldol condensation products (including stereosimers) formed by the reaction between acetaldehyde and acetophenone is :
Description : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an aldol condensation reaction. (a)2-Ethyl-3-hydroxy
Last Answer : Indicate the starting aldehyde or ketone from which each of the following compounds are formed by an ... hexanal (b) 4-Hydroxy-4-methyl-2-pentanone
Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area
Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted
Description : Sigma and Rho factors are required for (A) Replication (B) Transcription (C) Translation (D) Polymerisation
Last Answer : Answer : C
Description : Conversion of pepsinogen to pepsin is (A) Intra molecular rearrangement (B) Breaking of hydrogen bonds (C) Covalent modification (D) Polymerisation
Description : Many microbes can effect the chemical process of (a) Dehydration (b) Decomposition (c) Fermentation (d) Polymerisation
Last Answer : Ans:(c)
Description : The polymerisation of which of the Following is used in manufacturing of polythene in industry? (1) Methane (2) Styrene (3) Acetylene (4) Ethylene
Last Answer : (4) Ethylene Explanation: Ethylene is a rather stable molecule that polymerizes only upon contact with catalysts. The conversion is highly exothermic, that is the process releases a lot of heat. ... is the most pervasive technology, which means that metal chlorides or metal oxides are used.
Description : PVC is obtained by the polymerisation of – (1) Propane (2) Vinyl chloride (3) Styrene (4) Acetylene
Last Answer : (2) Vinyl chloride Explanation: Polyvinyl chloride is produced by polymerization of the monomer vinyl chloride (17CM). Polyvinyl chloride, commonly abbreviated PVC, is the third-most widely produced ... it is cheaper and stronger than more traditional alternatives such as copper or ductile iron.
Description : Styrene butadiene rubber is commercially manufactured by (A) Bulk polymerisation (B) Suspension polymerisation (C) Solution polymerisation (D) Emulsion polymerisation
Last Answer : (D) Emulsion polymerisation
Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides
Last Answer : (A) Cross linked polystyrene
Description : Commercial production of polypropylene employs __________ polymerisation. (A) Emulsion (B) Suspension (C) Solution (D) Bulk
Last Answer : (C) Solution
Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite
Last Answer : (B) Teflon
Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent
Last Answer : (B) Thermosetting
Description : Polycondensation reaction of polymerisation (A) Does not produce linear polymers (B) Produces only thermoplastic material (C) Produces epoxy polymers (D) Does not need any catalyst
Last Answer : (C) Produces epoxy polymers
Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism
Last Answer : (B) Magnitude of intermolecular forces