With a well labeled diagram explain the construction of Autoclave.

With a well labeled diagram explain the construction of Autoclave.
by

1 Answer

Answer :

image

Construction:

It consists of a strong metallic chamber usually made of stainless steel. 

It has a cover fitted with a steam vent, pressure gauze and a safety valve.

Rubber gasket is fitted on the inner side of the lid in order to make autoclave airtight.

The cover is closed with wing nuts and bolts.

The electrically heated element is fitted at the bottom to heat the water to convert into steam.

The perforated inner chamber is place on the stand.

The material to be sterilized is loosely packed into it.

by

Related questions

Describe construction of autoclave with diagram.

Description : Describe construction of autoclave with diagram. 

Last Answer : Construction:   It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze and a safety valve. Rubber gasket is fitted on the inner side ... the stand. The material to be sterilized is loosely packed into it. Diagram:

Explain the working of ball mill with a well labeled diagram and give any two advantages

Description : Explain the working of ball mill with a well labeled diagram and give any two advantages

Last Answer : Working:   The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other ... for batch as well as continuous grinding vi)can be used for dry as well as wet grinding.

Explain construction and working of cyclone separator with a well labelled diagram.

Description : Explain construction and working of cyclone separator with a well labelled diagram.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram  

Give principle, working and use of autoclave

Description : Give principle, working and use of autoclave

Last Answer : Principle:  Moist heat sterilization is a method of sterilization in which steam is used for sterilization. The steam has more penetration power and more thermal capacity than dry heat. ... by autoclaving. o Used for sterilization of a majority of official injections and eye drops. 

Explain working,construction of filter leaf with neat diagram.

Description : Explain working,construction of filter leaf with neat diagram. 

Last Answer : Construction of filter leaf   It consists of metal frame enclosing a wire screen or a grooved plate. The screen is covered by filter cloth which is fitted in frame, to grip the cloth. The frame ... . The cake can be washed by immersing in a vessel containing water or reverse flow of air

Describe the construction and working of evaporating pan with neat diagram.

Description : Describe the construction and working of evaporating pan with neat diagram.

Last Answer : Construction:  i. It consists of a hemispherical pan made from copper or stainless steel and surrounded by a steam jacket. ii. Hemispherical shape provides large surface area for evaporation. iii. ... . iv. After evaporation remove the product from product outlet. Diagram:

Give principle construction and working of hammer mill with neat diagram.

Description : Give principle construction and working of hammer mill with neat diagram.

Last Answer : PRINCIPLE: Impact CONSTRUCTION: It consists of a stout metal casing enclosing to which four or more swinging hammer are attached. The lower part of the casing consists of a screen , through which ... are not fixed . The mill can produce coarse to moderately fine powder. DIAGRAM:

Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Description : Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Last Answer : Factors which affect the rate of filtration are:   1. Pressure: The rate of filtration of liquid is directly proportional to the pressure difference between the filter medium and filter cake. Thus, the ... cake increases which decreases the rate of filtration.  Diagram of leaf filter :

Explain the method of hot percolation process with well labelled diagram and write its limitations.

Description : Explain the method of hot percolation process with well labelled diagram and write its limitations.

Last Answer : Diagram: Procedure :  1) The menstrum is placed in a round bottom flask. 2) The drug to be extracted is packed in a filter paper and placed in the body ... is unsuitable for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc.

Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Description : Draw a well labelled diagram of aerosol container and give its advantages and disadvantages.

Last Answer : Diagram of aerosol container Advantages:   1. Medicament can be delivered directly to affected areas. 2. Absence of air prevents oxidation. 3. Hydrolysis of medicament prevented ... on injured skin. 4. Difficulties occurred during formulation when drug not soluble in propellants.

Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Description : Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Last Answer : Diagram : Working  : The filter candle is placed in a vessel containing the liquid to be filtered. When vacuum is applied, the pressure inside the candle is decreased. Due to ... Disadvantages   1. Chance of clogging/blocking. 2. Traces of material may come in the solution.

Write the working of filter press with well labelled diagram.

Description : Write the working of filter press with well labelled diagram.

Last Answer : Working:  1. The slurry is pumped in under positive pressure up to 20 bar and fill each frame. 2. The filtrate passes through the cloths on opposite sides of the frame and runs down between the ... 6. Thickness of cake can be varied by using frame of different thickness. Diagram: 

Draw a well labelled diagram of Vacuum still and describe its theory.

Description : Draw a well labelled diagram of Vacuum still and describe its theory.

Last Answer : Theory :-  Liquid boils at lower temperature when pressure on the surface of the liquid is reduced. Therefore, when distillation is carried out under reduced pressure the rate of distillation increases. ... boiling point 100 ºc, at atmospheric pressure (760 mm of Hg ). Diagram: 

Draw a well labelled diagram of aerosol container and state method of aerosol packaging.

Description : Draw a well labelled diagram of aerosol container and state method of aerosol packaging. 

Last Answer : Diagram of aerosol container : Depending on the nature of the product concentrate the aerosol can be filed by cold filling or pressure filling process  1) Cold-filling fill process:- ... air present in the container must be expelled before filing the contents in to the aerosol container.

Draw well labelled diagram of “triple roller mill”.

Description : Draw well labelled diagram of “triple roller mill”.

Last Answer : diagram of “triple roller mill”.

Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process.

Description : Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process. 

Last Answer : Limitation: 1. Physical character of the drug: If the drug would block the soxhlet apparatus then this process cannot be used for extraction. Eg opium. Gum, resin, ... for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc. 

Define container and closure. Draw a well labelled diagram of Aerosol container.

Description : Define container and closure. Draw a well labelled diagram of Aerosol container. 

Last Answer : Definition: Container is a device that holds the drug and it may or may not be in direct contact with the pharmaceutical preparations. Closure is the device by means of which container can be opened and closed. Diagram of aerosol container:

Describe working of FBD with well labelled diagram.

Description : Describe working of FBD with well labelled diagram.

Last Answer : Working of FBD  Two types of FBD are used in pharmaceutical industry. There are: 1. Vertical FBD 2. Horizontal FBD The fluidising air stream is induced by a fan which is mounted in the upper part of ... from 5 kg to 200 kg with an average drying time of about 20- 40 min. Diagram:

Draw well labelled diagram of filter candle.

Description : Draw well labelled diagram of filter candle.

Last Answer : diagram of filter candle.

Explain construction and working of “Evaporation Still”

Description : Explain construction and working of “Evaporation Still”

Last Answer : Construction:  It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to the ... liquid is evaporated and condensed into the condenser 4) The product is collected through product outlet.

Explain the principle and construction of Planetary Mixer.

Description : Explain the principle and construction of Planetary Mixer.

Last Answer : Principle :-  The planetary mixer consists of stationary vessel & anchor shape blade which has planetary motion. The anchor shape blade rotates on its axis & axis moves around . ... iv) The mixing shaft is driven by planetary gear connected to an electric meter. Diagram

Explain construction and working of filter candle.

Description : Explain construction and working of filter candle.

Last Answer : Construction: These are cylindrical candles with an opening, The opening is connected to vacuum pump for reducing pressure under it, durin filtration process. The candles are made up of ... thick wall of the candle & gets collected inside the candle from where it is removed. 

Explain the construction and working of ‘Meta Filter’.

Description : Explain the construction and working of ‘Meta Filter’.

Last Answer : Construction: i. It consists of grooved, drainage rod on which a number of metallic ring are packed. ii. The rings are usually of stainless steel and have 0.8 mm outer thickness, 15 mm inside ... pack of ring act as a base on which the fine filtration medium is supported Diagram: 

Explain the construction and working of cyclone separator.

Description : Explain the construction and working of cyclone separator.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram

Explain the construction and working of silverson mixer homogenizer.

Description : Explain the construction and working of silverson mixer homogenizer. 

Last Answer : Construction It consists of emulsified head which is covered with fine meshed stainless steel sieve. The emulsifier head consist of a number of blades which rotates at a very high speed, to produce ... blades. So a fine emulsion is produced which is then expelled out. Diagram:

Explain the construction and working of filter press.

Description : Explain the construction and working of filter press.

Last Answer : Construction: It consists of alternative plate and frame mounted on two parallel support bars. The pressure can be applied through screw thread so that the plate and frame are rigidly fixed between ... Thickness of cake can be varied by using frame of different thickness. Diagram:

Explain theory and construction of FBD.

Description : Explain theory and construction of FBD.

Last Answer : Theory of FBD: The equipment works on a principle of fluidization of the feed materials. In fluidization process, hot air is introduced at high pressure through a perforated bed of moist solid particulate. The wet solids ... from 5 kg to 200 kg with an average drying time of about 20-40 min.   

Explain construction and application of tray dryer.

Description : Explain construction and application of tray dryer.

Last Answer : Construction of tray dryer.   The simplest form of dryer , the source of heat ( electric heater or steam coil) is at floor level & relies on natural convection. Therefore no efficient ... of crude drugs 2)For chemicals 3)For powders 4)For Granules used in tablet manufacturing 

Explain construction and working of ball mill.

Description : Explain construction and working of ball mill.

Last Answer : Principle: Impact and Attrition. Construction: It consists of a hollow cylinder which is mounted on a metallic frame in such a way that it can be rotated on its longitudinal axis. The cylinder contains ... material is taken out and passed through a sieve to get powder of the required size. 

Explain the construction and working of triple roller mill.

Description : Explain the construction and working of triple roller mill.

Last Answer : Construction: It consists of 3 rollers. Rollers are made up of hard abrasion resistant material. Rollers are arranged very close to each other's. Rollers are rotated at different speed & in ... A Scraper is provided to remove the material from roller no.3 Diagram: 

Explain construction and working of Cutter mill or Hammer mill

Description : Explain construction and working of Cutter mill or Hammer mill

Last Answer : CONSTRUCTION: It consists of a hopper at top and metal casing enclosing two sets of knives i.e. stationary knives attached to stator and rotating are attached to rotor. The lower part of the casing consists ... are not fixed. The mill can produce coarse to moderately fine powder DIAGRAM:  

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Name different methods of size separation. Explain any one with labelled diagram.

Description : Name different methods of size separation. Explain any one with labelled diagram.

Last Answer : Different methods of size separation are:  1 Sieving 2 Cyclone separator 3 Air separator 4 Elutriation SIEVING: Diagram: Construction: In this method fine powder is separated from ... tank is used to separate the coarse and fine particles of powder after levigation Diagram:

Explain working of fluid energy mill with a neat diagram.

Description : Explain working of fluid energy mill with a neat diagram.

Last Answer : Working:  1. The material which is to be size reduced is fed in the grinding chamber from the bottom through the feed inlet. 2. The air or inert gas is introduced with a very high pressure through ... particle size to the order of 100# and then passed through fluid energy mill. Diagram:   

Describe construction and working of double cone blender.

Description : Describe construction and working of double cone blender.

Last Answer : Diagram: Construction: Double cone blender is made up of stainless steel and is available in different capacity ranging from 5 kg to 200 kg or even more. The efficiency of ... to produce shearing action and design is useful for mixing powders of different densities in small quantities.

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Describe the principle, construction, working and uses of cyclone separator.

Description : Describe the principle, construction, working and uses of cyclone separator.

Last Answer : Principle: Centrifugal force   Construction-  1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of the vessel is fitted ... the suspension of a solid in gas 2. It can be used with liquid suspension of solid

Write the principle, construction, working and uses of the disintegrator.

Description : Write the principle, construction, working and uses of the disintegrator.

Last Answer : Principle: The Disintegrator works on the principle of impact.  Construction:  The Disintegrator consists of steel drum having a shaft in the centre. The shaft contains a disc, on which four beaters are ... Use:   This mill is used to powder all types of drugs including very hard drugs.

Discuss the theory, construction, and working of freeze drying apparatus

Description : Discuss the theory, construction, and working of freeze drying apparatus

Last Answer : Theory: Freeze drying or sublimation drying consists of simply reducing the temperature & pressure to values below the triple point .(4.579mm of Hg& temp. of 0.0099 c) Under these ... . 5. Packing: Biological products are dried packed in aseptic condition immediately after drying.

Write construction and disadvantages of short tube evaporator.

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

Describe the construction and Operation of Buchholz relay with neat labeled diagram.

Description : Describe the construction and Operation of Buchholz relay with neat labeled diagram.

Last Answer : Construction of Buchholz Relay: It takes the form of a domed vessel placed in the connecting pipe between the main tank and the conservator. The device has two elements. The upper element ... manner that it senses the sudden violent movement of oil/gas from transformer tank to conservator. 

Discuss working of ball mill with neat diagram.

Description : Discuss working of ball mill with neat diagram. 

Last Answer : Working: The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other and ... and passed through a sieve to get powder of the required size. Ball mill diagram:   

Give principal and working of silverson homogenizer with labelled diagram.

Description : Give principal and working of silverson homogenizer with labelled diagram.

Last Answer : Principal:   These work on the principal of braking large globules in to small globules by passing them under pressure through a narrow orifice. Working:   The emulsified head is placed in the vessel ... blades. So a fine emulsion is produced which is then expelled out. Diagram :

Define desiccation with two example of Desiccants and draw a diagram of “ Desiccator”

Description : Define desiccation with two example of Desiccants and draw a diagram of “ Desiccator”

Last Answer : Definition: Desiccation is the process of complete removal of mechanically admixed water from substances. Examples of desiccants:  Silica, activated charcoal, calcium sulfate, calcium chloride, and molecular sieves. Diagram:

Define The term Clarification. Write the working of filter candle with neat diagram.

Description : Define The term Clarification. Write the working of filter candle with neat diagram.

Last Answer : Clarification:-  When solids are present in a very small proportion i.e. not exceeding 1.0 % the process of its separation from liquid, is called clarification. Working :-   1) These are ... the candle & gets collected inside the candle from where it is removed. Diagram :

Draw a labelled diagram of double cone blender

Description : Draw a labelled diagram of double cone blender

Last Answer : diagram of double cone blender

Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Description : Draw a labelled diagram of apparatus used for continuous hot extraction process. Mention limitations of the process.

Last Answer : Diagram: Limitations: process cannot be used in following conditions.  Physical character of the drug: Drugs which may block the apparatus such as opium, gums, resins, etc cannot ... process. Chemical constituents: Unsuitable for thermolabile drugs, such as enzymes, alkaloids, etc

Describe aerosol container with labelled diagram

Description : Describe aerosol container with labelled diagram

Last Answer : PARTS OF AEROSOL PACKAGING: 1. Container: In pharmaceutical aerosol packaging, the containers are made from metal (tin-plated steel, aluminium and stainless steel), glass and plastic. These containers ... the propellant to come out without dispensing content of package. Aerosol container:

Classify different methods used for extraction. Draw a labelled diagram of soxhelt extractor

Description : Classify different methods used for extraction. Draw a labelled diagram of soxhelt extractor

Last Answer : Methods Of Extraction:   a) Infusion b) Decoction c) Maceration d) Percolation e) Digestion Diagram of Soxhlet apparatus: 

Draw a neat labelled diagram showing steam distillation at laboratory scale

Description : Draw a neat labelled diagram showing steam distillation at laboratory scale

Last Answer : labelled diagram showing steam distillation at laboratory scale